Instrukcja obsługi Lenmar Enterprises Lenmar N-Verter NVC450D

Streszczenie treści zawartej na stronie nr. 1

Operating your N-Verter
1. The NVC250 comes with a cigarette lighter adapter cable only, and the NVC450D comes with both a cigarette lighter
adapter cable for powering devices under 300W, and a clip lead set for all loads up to 450W. According to your unit and
the power you will require, connect the appropriate cable to the power cable posts on the N-Verter as shown in figure-2.
Be sure to match the color of the cable ends to the color of the post (red to red and black to black) and make su

Streszczenie treści zawartej na stronie nr. 2

Warning - When using you N-Verter with the vehicle’s engine turned off, the battery is being drained. Be careful to Specifications re-start the engine or otherwise recharge the battery periodically to avoid draining the battery too deeply. The internal NVC250 - 250W “low voltage shut-off” of the N-Verter does not guarantee that the remaining power left in the battery is enough to start Maximum output power 250W (15 min.) the vehicle. Surge output power 500W (10