Instrukcja obsługi Kenwood Excelon DDX8019

Streszczenie treści zawartej na stronie nr. 1

MONITOR WITH DVD RECEIVER
DDX8019
DDX8039
INSTALLATION MANUAL
© B54-4532-00/00 (KV/RV)

Streszczenie treści zawartej na stronie nr. 2

Accessories 1 ..........1 2 ..........1 3 ..........2 4 ..........1 5 ..........1 6 ..........6 7 ..........6 8 ..........1 | 2 DDX8019/DDX8039

Streszczenie treści zawartej na stronie nr. 3

Installation Procedure 1. To prevent a short circuit, remove the key from the € ignition and disconnect the - battery. • If the power is not turned ON (or it is ON, but will be OFF 2. Make the proper input and output wire immediately), the speaker wire may have a short-circuit connections for each unit. or touched the chasis of the vehicle and the protection 3. Connect the speaker wires of the wiring harness. function may have been activated. Therefore, the speaker 4. Connect the wiring ha

Streszczenie treści zawartej na stronie nr. 4

Connection If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) FUSE ( 5A ) Ground wire (Black) - (To car chassis) C C Antenna Cord Battery Connect to the vehicle's parking brake detection switch

Streszczenie treści zawartej na stronie nr. 5

FUSE ( 10A ) Rear view Cooling fan FM/AM antenna input Accessory 1 REVERSE ILLUMI White/Black To front left speaker + REMO.CONT White Gray/Black To front right speaker MUTE + Gray Green/Black To rear left speaker + Green ANT. CONT Purple/Black To rear right speaker + P CONT Purple EXT.CONT | English 5 REAR L FRONT R REAR R FRONT L

Streszczenie treści zawartej na stronie nr. 6

System Connection USB terminal (iPod) USB device (commercially available) USB terminal USB device (commercially available) iPod Do not connect. To Relay Box Accessory 2 Rear view ■ Audio/Visual input2 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual Output • Visual output (Yellow) ■ Audio/Visual input1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Visual input (Yellow) ■ Front Preout • Aud

Streszczenie treści zawartej na stronie nr. 7

iPod iPod AUDIO IN VIDEO IN Optional Accessory Connection iPod (commercially available) Navigation System (Optional Accessory) KCA-iP300V (Optional Accessory) Audio Input Connection cable Audio Output (Included in the Navigation System) (Black) Visual Input Visual Output (Yellow) Rear view USB terminal USB terminal (iPod) USB terminal iPod cannot be connected. Connection cable (Included in the Disc changer) Disc Changer etc. (Optional Accessory) TV Tuner (Optional Accessory) Connection cable

Streszczenie treści zawartej na stronie nr. 8

Installing the Escutcheon For General Motors 1. Cut out accessory 4 to meet the shape of Cut out to meet the shape of the opening of the center console. the opening in the vehicle. 2. Attach accessory 4 to the unit. Accessory 4 For Volkswagen 1. Attach accessory 8 to the unit. Accessory 8 | 8 DDX8019/DDX8039

Streszczenie treści zawartej na stronie nr. 9

For Toyota/Scion 1. Cut out accessory 4 as illustrated. Cutting line Accessory 4 2. Fold double-sided adhesive (accessory 5) along the slit and attach it to Accessory 5 accessory 4 cut-out against the center rib as illustrated. Use 2 pieces of accessory 5 for 1 accessory 4 cut- out. 3. Attach accessory 4 cut-out to the unit. | English 9

Streszczenie treści zawartej na stronie nr. 10

Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 6 (M5x

Streszczenie treści zawartej na stronie nr. 11

Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 3 deeply into the Acce

Streszczenie treści zawartej na stronie nr. 12