Instrukcja obsługi Eclipse - Fujitsu Ten E-iSERV CD7200 mkII

Streszczenie treści zawartej na stronie nr. 1

E-iSERV Operation Guide
CD/USB Multi-Source Tuner with Bluetooth
wireless technology
We appreciate your purchase of this CD tuner.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

Streszczenie treści zawartej na stronie nr. 2

Motion Picture customization Importing display data Motion Picture Customize Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner’s Manual. The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing you to create your own original Motion Picture screens. You can create your own fi le by downloading the cutting boa

Streszczenie treści zawartej na stronie nr. 3

Load the downloaded data from the USB memory or CD-R to the unit. For details of 22 the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.

Streszczenie treści zawartej na stronie nr. 4

Audio customize Importing Sound Data Audio Customize Audio Customize provides the best acoustic settings suited for your in-car environment with ECLIPSE's unique acoustic correction algorithm. How to download the Audio Customize setting fi les 11 Analyze the frequency characteristic and write it to the USB memory. Use the optional (MEI-100) microphone to analyze the frequency characteristic. For details of the operation, see 'Displaying measurement results and save to USB memory' in the Owner

Streszczenie treści zawartej na stronie nr. 5

Upload the analyzed frequency characteristic data to the E-iSERV website, and make 22 adjustment on the website. For details of the operation, see the HELP page on the website. 33 Load the adjusted data from the USB memory to the unit. For details of the operation, see 'Importing Sound Data (Sound Data)' in the Owner's Manual. ATTENTION • Data downloaded from the E-iSERV website should be saved to folders created in the USB drive as shown below (NOTE: in order

Streszczenie treści zawartej na stronie nr. 6

Steering Remote Control Importing steering remote data (U.S.A. only) Steering Remote Control The vehicle’s factory loaded steering remote becomes inoperable when the CD7200 mkII is installed. The ECLIPSE website (E-iSERV) provides software that enables steering remote operation even with the installation of the main unit. Import this software into your CD7200 mkII. How to operate the Steering Remote Control Download the file for Steering Remote setting from the E-iSERV website, then write 11

Streszczenie treści zawartej na stronie nr. 7

Load the downloaded data from the USB memory or CD-R to the unit. For details 22 of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's Manual. ATTENTION • This function is available only for the vehicles that have steering remote with the voltage detection type interface. • For detail of the setting, please contact to ECLIPSE dealer.