Instrukcja obsługi Digi ACCELEPORT EPC/CON-16

Streszczenie treści zawartej na stronie nr. 1

RJ-45 Pin Assignments
Step Five: Install peripheral cabling
AccelePort EPC/X System
You can connect printers, terminals, modems (or any other standard EIA-
Signal Description Pin
EPC/X PCI Host Adapter
232 device to be controlled by applications on the computer) to the
RI Ring Indicator 1
EPC/CON-16 Concentrator
EPC/CON-16 concentrator by installing a cable between the peripheral
DSR Data Set Ready 2†
and the concentrator.
RTS Request To Send 3
Hardware
On the peripheral end of the cable, the

Streszczenie treści zawartej na stronie nr. 2

3. Install a terminator plug in the REMOTE connector of the last concen- Step One: Plan your setup Step Two: Install the EPC/X PCI host adapter trator in the chain. An EPC/X system can be set up in a variety of ways. Before you start Before installing the EPC/X host adapter, you should do the following: 4. Repeat steps 2 and 3 for Line 2 on the adapter (if you are using it). your installation, be sure of the following: • Wear an ESD wrist strap to ground yourself while handling the Number of