Streszczenie treści zawartej na stronie nr. 1
Owner’s manual
Mode d’emploi
Bedienungsnleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
Bruksanvisning
Manual de instalação
DXZ948RMP
HIGH END RDS-EON FM/MW/LW RADIO CD/MP3/WMA
COMBINATION WITH TOUCH PANEL
•
RDS EON HAUT DE GAMME COMBINAISON FM/MW/LW
RADIO CD/MP3/WMA AVEC ECRAN TACTILE
•
HOCHLEISTUNGS-UKW-/MW-/LW-AUTORADIO-
KOMBINATION MIT RDS-EON-FUNKTION UND CD-/MP3-/
WMA-SPIELER MIT TOUCH PANEL-BEDIENFELD
•
HIGH END RDS-EON FM/MW/LW RADIO CD/MP3/WMA
COMBINAZIONE CON
Streszczenie treści zawartej na stronie nr. 2
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected via the CeNET cable. The CD changer and TV tuner have their own manuals, but no explanatio
Streszczenie treści zawartej na stronie nr. 3
English Contents 1. PRECAUTIONS .............................................................................................................................. 3 Sloping Console .............................................................................................................................. 4 Handling Compact Discs ................................................................................................................. 4 2. CONTROLS ...........................................
Streszczenie treści zawartej na stronie nr. 4
English Sloping Console This unit uses a SLOPING CONSOLE to make 2. Before the SLOPING CONSOLE closes, large screen displays possible. there may be a braking sound from the safety mechanism. This is normal. When you use the SLOPING CONSOLE, be sure to close it. 3. If you move the SLOPING CONSOLE by hand, this may start play. To correct this play, with the power for the unit ON, press the [QQQQQ] CAUTION button to close the SLOPING CONSOLE. BE CAREFUL NOT TO GET YOUR FINGERS 4. After a disc is e
Streszczenie treści zawartej na stronie nr. 5
English 2. CONTROLS Main unit Photo Snsor [Q] [ ] RELEASE [ A] [ ] [ ROTARY SOUND] [ ] TA IR-Receiver [ ] Display With the SLOPING CONSOLE opened [ ] CD SLOT DXZ948RMP 5
Streszczenie treści zawartej na stronie nr. 6
English 3. NOMENCLATURE Names of the Buttons and their Functions [RELEASE] button [TA] button • Remove the DCP. • Use the button to set the TA (Traffic Announcement) standby mode (when the 2- Photo Sensor ZONE function is “OFF”). • This sensor detects the brightness inside your Switches the operation of the 2-ZONE function. car. When the auto-dimmer function is set to Holding this button down for 1 second or “AUTO”, the brightness of the display is longer switches the 2-ZONE type (when the 2- di
Streszczenie treści zawartej na stronie nr. 7
English Major Button Operations when External Equipment is Connected to this Unit ●When the CD/DVD changer is ●When the TV/DAB is connected ∗ For details, see the section “TV connected operations” (cf. page 54) or “Digital Radio ∗ For details, see the section “CD changer / DAB operations” (cf. page 58). operations” (cf. page 51). For the DVD changer, refer to the Owner’s Manual [TA] button provided with the DVD changer. • Use the button to set the TA (Traffic Announcement) standby mode to the DA
Streszczenie treści zawartej na stronie nr. 8
English Display Operations A touch panel display is used as the display on Touch this unit. You can operate this display just by Touch the display with your fingertip, and move touching it with your fingertip. There are four your finger to the left ( ) or right ( ➜ ) with your main display operations as follows: fingertip still touching the display, and take your fingertip away within 1 second. This operation is Touch used for selecting preset memory (1 to 6) or Touch the display with your fin
Streszczenie treści zawartej na stronie nr. 9
English 4. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Insert the DCP so that the A section on the in the DCP (DETACHABLE CONTROL PANEL) right side of the DCP catches on the hook B case to prevent scratches. on the unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. With the SLOPING CONSOLE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button
Streszczenie treści zawartej na stronie nr. 10
English 5. REMOTE CONTROL Receiver for remote control unit Operationg range : 30° in all directions Signal transmitter Remote control unit [ ] [ ] FUNC 2-ZONE [ ],[ ] [ ],[ ] [BAND] [TA] [ ] MUTE [DISP] [ ] [PTY] PS/AS [ ] AF Inserting the Batteries 1. Turn the remote control unit over, then slide AA (SUM-3, R-6/1.5V) Batteries the rear cover in the direction of the arrow. 2. Insert the AA (SUM-3, R-6/1.5V) batteries that came with the remote control unit facing in the direct
Streszczenie treści zawartej na stronie nr. 11
English Functions of Remote Control Unit Buttons Mode CD changer Radio (RDS) / DAB CD/MP3 TV DVD changer Button [FUNC] Switches among radio, DAB, CD/MP3, AUX, CD changer, DVD changer and TV. Plays the first track. Moves the next disc [BAND] Switches reception Switches reception Top play. in increasing order. band. band. Increases and decreases volume (in all modes). [ ] , [ ] [ ] , [ ] Moves preset Moves tracks up and down. Moves preset channels up and When pressed and held
Streszczenie treści zawartej na stronie nr. 12
English 6. OPERATIONS Basic Operations CODEMATIC function CAUTION When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Be sure to lower the volume before Touch Code display appears. Touch the display switching the unit off or the ignition key. The in the order that was set in the adjust mode. unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and
Streszczenie treści zawartej na stronie nr. 13
English Basic Operations Switching the operation mode Switching the display There are 2 basic operation modes: standard 1. Touch the centre of the display. operation and simple operation. Each time you touch the display, it changes as follows: 1. In the main display screen, touch and hold the left of the display for 1 second or longer. Title display The operation mode is switched. PS NAME MODE SIMPLE MODE MODE FM1 42 B 98.10MHz 3 BAND 98.10MHz B BAND Spectrum Analyzer display In the simple oper
Streszczenie treści zawartej na stronie nr. 14
English Basic Operations Wallpaper Spectrum analyzer display Touching and holding the center of the display Touching and holding the right of the display for for 1 second or longer switches to the wallpaper 1 second or longer during the spectrum display. analyzer (S/A) display switches the spectrum analyzer display. 1 9 S/A 1, S/A 2, and S/A 3 are S/A displayed for 10 seconds or longer SCAN each. S/A 1 S/A 1 MODE 0 2 FLDR No. WMA WMA 01/01:48 003 TOP S/A 2 S/A 2 MODE FLDR No. ! WMA 3 WMA 0
Streszczenie treści zawartej na stronie nr. 15
English Basic Operations 3. Touch on the right of the display to ■ To stop scrolling select the ADF mode. Touch on the title display. RTN ADF MODE OFF CT (Clock Time) function The CT allows you to receive CT data sent from an RDS station and display the time. To display When ADF is set to “OFF”, the ADF setting the CT screen, touch the centre of the display. is not reflected on the music source. This • If CT data is not being received, “--:-- CT” ends the ADF setting. Press the [SOUND] appears
Streszczenie treści zawartej na stronie nr. 16
English Basic Operations 2. Touch A-MODE. 4. Touch on the right of the display adjust the item as desired. OFF OFF OFF ∗ “BALANCE” can be adjusted within the RTN II POSITION P. EQ Dolby PL SOUND MENU range L13 (left side emphasized) and R13 2 - ZONE ADF A - MODE OFF OFF (right side emphasized). ∗ “FADER” can be adjusted within the range R12 (rear side emphasized) and F12 (front 3. Touch on the adjustment item display side emphasized). to select “SW VOLUME” or “CTR VOLUME”. 5. Press the [SOUND
Streszczenie treści zawartej na stronie nr. 17
English AC-Processor III Operations 3. Touch on the right of the display to Dolby Pro Logic II select the Dolby Pro Logic II mode. Dolby Pro Logic II is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is RTN Dolby PL II OFF further improved. Dolby Pro Logic II realizes excellent 5.1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs, thereby causing a The mode display is switched as follows: surround c
Streszczenie treści zawartej na stronie nr. 18
English AC-Processor III Operations 3. Touch on the ON/OFF display. 1. Press the [SOUND] button. The position effect is toggled ON/OFF. 2. Touch POSITION. 3. Touch on the ON/OFF display. POSITION MODE RTN The position effect is toggled ON/OFF. BASIC FRONT 4. Touch B/U to select “BASIC” or “USER”. BU OFF 3 B/U 5. Touch on the right of the display to When the position effect is set to “OFF”, the select the menu that is used as the menu for position setting is not reflected on the music adjustme
Streszczenie treści zawartej na stronie nr. 19
English AC-Processor III Operations 10. Repeat steps 7 to 9 to adjust the desired 3. Touch on the ON/OFF display. item. The VSE effect is toggled ON/OFF. 11. When you have finished adjusting each item, touch RTN. VSE MODE RTN BASIC FLAT The display returns to the original screen, 26 BU OFF 1 B/U and “” is displayed at the BASIC or USER display. When VSE is set to “OFF”, the VSE setting Operation so far completes position is not reflected on the music source. This adjustment. To continue to st
Streszczenie treści zawartej na stronie nr. 20
English AC-Processor III Operations CAR LENGTH: Selecting the P.EQ menu Adjusts the deviation in sound pressure along P.EQ (Parametric Equalizer) allows you to the length of the car. compensate the entire frequency level range in detail by smooth curve using frequency 1. Press the [SOUND] button. compensation matched to the type of your car. 2. Touch VSE. In the “Selecting each mode” procedure (cf. 3. Touch on the ON/OFF display. page 44), set EQ SELECT to “P.EQ”. The VSE effect is toggled ON/O
