Instrukcja obsługi Bogen CommunicationsHS7EZ

Streszczenie treści zawartej na stronie nr. 1

TM
Easy Design Speaker
Model HS7EZ
Speaker Layout
Figure 1
HORN SPEAKER
START
The layout of the speakers should be planned prior
Row 1
to installation. Desired mounting height, barring
A
C
obstructions, is 15 to 20 feet, with the speakers
angled downward toward the listening area and
Row 2
facing in the same direction.
Layout starts in one corner of the area.The first
B
speaker in Row 1 should be positioned a distance
equivalent to (A) (see Figure 2) from the corner
Row 3
based on the noise leve

Streszczenie treści zawartej na stronie nr. 2

Speaker Installation STEP 1 - For easier installation, remove the flange (base) Figure 3 from the speaker by unscrewing the wing nut. Place the flange flush with the mounting surface and mark the pivot area using either a marker or chisel. Drill the appropriately sized hole and screw the flange to the surface. Place another screw in the front of the flange for swivel control purposes (see Figure 3). (Use appropriate hardware for your specific mounting sur- face.) STEP 2 - After mounting the flan