Streszczenie treści zawartej na stronie nr. 1
3-865-384-13 (1)
Video Cassette
Recorder
Operating Instructions
G
PAL NTSC
SLV-ED60ME/MJ/PS/SG
©1999 by Sony Corporation
Streszczenie treści zawartej na stronie nr. 2
Caution WARNING Television programmes, films, video tapes and To prevent fire or shock hazard, do not expose other materials may be copyrighted. the unit to rain or moisture. Unauthorized recording of such material may To avoid electrical shock, do not open the be contrary to the provisions of the copyright cabinet. Refer servicing to qualified personnel laws. Also, use of this recorder with cable only. television transmission may require The mains lead must only be changed at a authorization fr
Streszczenie treści zawartej na stronie nr. 3
Getting Started Table of contents Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the remote commander 6 Step 3: Connecting the VCR 8 Step 4: Tuning your TV to the VCR 10 Step 5: Selecting a language 11 Step 6: Presetting channels 17 Step 7: Setting the clock Basic Operations Additional Information 19 Playing a tape 42 Troubleshooting 23 Recording TV programmes 44 Specifications 26 Recording TV programmes using 45 Index to parts and controls the easy timer Back cover 31 Setting the tim
Streszczenie treści zawartej na stronie nr. 4
Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • Remote commander • Aerial cable • R6 (size AA) batteries • Plug adaptor (SLV-ED60ME/MJ only) Checking your model name The instructions in this manual are for the 4 models: SLV-ED60ME, ED60MJ, ED60PS and ED60SG. Check your model number by looking at the rear panel of your VCR. The SLV-ED60ME is the model used for illustration purpose. Any difference in operation is clearly indicated in the text, fo
Streszczenie treści zawartej na stronie nr. 5
Getting Started Step 2 Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote commander Remote sensor You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your S
Streszczenie treści zawartej na stronie nr. 6
Step 3 Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound. Connecting the aerial AERIAL IN AERIAL OUT Mains lead AERIAL IN to mains : Signal flow Aerial cable (supplied) 1 Disconnect the aerial cable from your TV AERIAL IN and connect it to AERIAL IN on the rear
Streszczenie treści zawartej na stronie nr. 7
Getting Started To a stereo system You can improve sound quality by connecting a stereo system as shown on the right. LINE-2 OUT LINE IN (AUDIO) Note • To listen to playback sounds in stereo, you must use either of the connections above. Audio cable (not supplied) To a satellite tuner Satellite tuner You can record programmes from other equipment such as a satellite tuner. LINE OUT LINE-3 IN (SAT IN) Audio/video cable (not supplied) Getting Started 7
Streszczenie treści zawartej na stronie nr. 8
Step 4 Tuning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. 1/u ON/STANDBY RF CHANNEL PROGRAM +/– ON/STANDBY 1 Press 1/u ON/STANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR. The factory-preset RF channel appears in the display window. The VCR signal is output through this channel to the TV. RF CHANNEL SP APC 3 Turn on your TV and select a programme position for the VCR picture. This channel will now be referred to as the video c
Streszczenie treści zawartej na stronie nr. 9
Getting Started 5 Tune the TV to the same channel as that SONY VIDEO CASSETTE shown in the display window so that RECORDER the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions. If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below. 6 Press RF CHANNEL. You have now tuned your TV to the VCR. From now on, whenever you want to play a tape, set the TV to the video channel. RF CHANNEL To obtain a clear picture from the
Streszczenie treści zawartej na stronie nr. 10
Step 5 Selecting a ON/STANDBY language You can change the on-screen display language from English to Arabic. 123 456 Before you start… • Turn on your TV and set it to the 789 video channel. 0 MENU OK >/. • ON/ STANDBY 1 Press ON/STANDBY to turn on the VCR. MENU LANGUAGE / LANGUAGE / 2 Press MENU, then press >/. to move the • ENGLISH cursor (Ó) to LANGUAGE and press OK. PLAY SELECT :[] OK END : [ OK ] LANGUAGE / 3 Press >/. to select the desired language, ENGLISH then press OK. PLAY • OK [ ] : [
Streszczenie treści zawartej na stronie nr. 11
Getting Started Step 6 Presetting channels First, we recommend that you preset the receivable channels in your area using the one touch tuning or the AUTO PRESET in the TUNER PRESET menu. Then, if some channels could not be preset automatically, set them manually; if there are any unwanted channels among the preset ones, you can disable the channels. Presetting all receivable channels using one touch tuning ONE TOUCH TUNING ONE TOUCH 1 Press ONE TOUCH TUNING on the VCR for more than 3 seconds. T
Streszczenie treści zawartej na stronie nr. 12
Step 6: Presetting channels (continued) Presetting all receivable channels automatically Before you start… MENU • Turn on the VCR and the TV. • Set the TV to the video channel. OK >/./?// MENU 1 Press MENU, then press >/. to move the TUNER PRESET PROG 1 cursor (Ó) to TUNER PRESET and press SYSTEM • B / G D / K I NORMAL / CATV • NORM CATV OK. AUTO PRESET CHANNEL SET 1 AFT • ON OFF FINE TUNING PLAY :[] SELECT SET : [ ] OK 2 Press >/./?// to move the cursor (Ó) TUNER PRESET PROG 1 to SYSTEM, then s
Streszczenie treści zawartej na stronie nr. 13
Getting Started 4 Press >/. to move the cursor (Ó) to TUNER PRESET PROG 1 AUTO PRESET, then press OK. SYSTEM • B / G D / K I PLAY NORMAL / CATV • NORM CATV OK AUTO PRESET All receivable channels are preset in CHANNEL SET 1 numerical sequence. When no more AFT • ON OFF FINE TUNING receivable channels can be found, PLEASE WAIT presetting stops and the picture from the lowest numbered channel is displayed on the TV screen. continued Getting Started 13
Streszczenie treści zawartej na stronie nr. 14
Step 6: Presetting channels (continued) Presetting channels manually PROG +/– MENU OK >/./?// MENU 1 Press MENU, then press >/. to move the TUNER PRESET PROG10 cursor (Ó) to TUNER PRESET and press SYSTEM • B / G D / K I NORMAL / CATV • NORM CATV OK. AUTO PRESET CHANNEL SET 21 AFT • ON OFF PLAY FINE TUNING :[] SELECT OK SET : [ ] 2 Press >/./?// to move the cursor (Ó) TUNER PRESET PROG10 to NORMAL/CATV, then select NORM. SYSTEM • B / G D / K I PLAY NORMAL / CATV • NORM CATV OK AUTO PRESET To pres
Streszczenie treści zawartej na stronie nr. 15
Getting Started PROG Selected programme 4 Press PROG +/– to select the programme position position. TUNER PRESET PROG14 SYSTEM • B / G D / K I NORMAL / CATV • NORM CATV AUTO PRESET CHANNEL SET 21 AFT • ON OFF FINE TUNING :[] SELECT SET : [ ] TUNER PRESET PROG14 5 Press / repeatedly until the channel you want is displayed. SYSTEM • B / G D / K I PLAY NORMAL / CATV • NORM CATV Pressing ? goes back to the previous AUTO PRESET OK CHANNEL SET 35 channels. AFT • ON OFF FINE TUNING :[] The channels ar
Streszczenie treści zawartej na stronie nr. 16
Step 6: Presetting channels (continued) Disabling unwanted programme positions After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. 1 In step 5 on page 15, press programme number button “0” twice to display the number “0” beside CHANNEL SET. 2 Press OK. If the picture is not clear Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is
Streszczenie treści zawartej na stronie nr. 17
Getting Started Step 7 Setting the clock You must set the time and date on the MENU VCR to be able to use the timer recording features properly. Before you start… OK • Turn on the VCR and the TV. >/./?// • Set the TV to the video channel. MENU 1 Press MENU, then press >/. to move the CLOCK SET cursor (Ó) to CLOCK SET and press OK. 1 . 1 . 19 9 9 FR 0 : 00 SELECT :[] PLAY SET : [ ] OK END : [ OK ] 2 Press >/. to set the date. CLOCK SET 25 . 1 . 19 9 9 MO 0 : 00 PLAY The day of the week is set a
Streszczenie treści zawartej na stronie nr. 18
Step 7: Setting the clock (continued) 4 Set the year, hour and minutes in CLOCK SET sequence, using / to flash the item to be 252 . 1 . 19 9 9 SA 15:30 PLAY set, and >/. to select the digits. OK SELECT :[] [ SET : ] END : [ OK ] 5 Press OK to start the clock. PLAY OK Tip • To change the digits during setting, press ? to return to the item to be changed, and select the digits using >/.. Note • The menu disappears automatically if you do not proceed for more than a few minutes. 18 Getting Start
Streszczenie treści zawartej na stronie nr. 19
Basic Operations Basic Operations Playing a tape 6 EJECT TRINITRON TV SYNCHRO PLAY COUNTER RESET DISPLAY 123 456 789 0 P PAUSE á PLAY ) # FF p STOP á PLAY ) # FF 0 3 REW 0 3 REW COLOR SYSTEM ¤ EJECT p STOP 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. continued Basic Operations 19
Streszczenie treści zawartej na stronie nr. 20
Playing a tape (continued) 3 Press á PLAY. PLAY When the tape reaches the end, it will rewind automatically. OK Additional tasks To Press Stop play p STOP Pause play P PAUSE Resume play after pause P PAUSE or á PLAY ) # FF during stop Fast-forward the tape 0 3 REW during stop Rewind the tape 6 EJECT Eject the tape To set the colour system If streaks appear during playback, press COLOR SYSTEM on the VCR to conform to the system that the tape was recorded in. (Normally, the colour system is corre
