Streszczenie treści zawartej na stronie nr. 1
HD DIGITAL VIDEOCASSETTE RECORDER
HDW-D2000
[English]
OPERATION MANUAL
1st Edition (Revised 1)
Streszczenie treści zawartej na stronie nr. 2
WARNING: THIS WARNING IS APPLICABLE FOR WARNING OTHER COUNTRIES. To prevent fire or shock hazard, do not 1.Use the approved Power Cord (3-core mains)/Appliance Connector/Plug with earthing-contacts that conforms to expose the unit to rain or moisture. the safety regulations of each country if applicable. 2. Use the Power Cord (3-core mains lead)/Plug To avoid electrical shock, do not open conforming to the following ratings, which meets power the cabinet. Refer servicing to qualified supply vol
Streszczenie treści zawartej na stronie nr. 3
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 1-2 Example System Configuration .................................................... 1-3 Overview 2-1 Control Panels ................................................................................ 2-1 Chapter 2 2-1-1 Upper Control Panel .............................................................. 2-2 Location and Function of 2-1-2 Lower Control Panel .
Streszczenie treści zawartej na stronie nr. 4
Table of Contents 6-1 Overview ......................................................................................... 6-1 Chapter 6 6-2 Shot Mark Operation Menu .......................................................... 6-2 Shot Mark Function 6-3 Shot Mark Operations ................................................................... 6-3 6-3-1 Reading Shot Marks .............................................................. 6-3 6-3-2 Writing Shot Marks....................................
Streszczenie treści zawartej na stronie nr. 5
Chapter 1 Overview Chapter 1 Overview 1-1 Features The HDW-D2000 is a high-definition (HD) digital High-precision digital signal processing videocassette recorder based on the HDCAM format. and range of interfaces This unit uses large scale integrated circuits for signal processing, and has a simple internal construction, The digital signal processing uses HD 4:2:2 allowing it to provide functionality at least equivalent component video signals complying with SMPTE to a conventional VTR in a co
Streszczenie treści zawartej na stronie nr. 6
Chapter 1 Overview 1-1 Features Time data display Preread editing This can be selected to display a CTL counter value, This allows you to play back prerecorded video and time code value, or time code user bits. It can also audio material, edit it by applying effects with an display edit points and edit durations. external device, and then rerecord in real time on the same tape. Menu-based control interface Cross-fade editing The time data/menu display shows not only various values and settings,
Streszczenie treści zawartej na stronie nr. 7
Chapter 1 Overview 1-2 Example System Configuration The following conceptual diagram shows an example of use. BVE-series editor Tape control SDTI (optional) Audio/video HDSDI server system Digital cassette HDW-D2000 HDSDI/Analog HDSDI composite SDTI (optional) Video monitor HD VTR Analog composite/component Analog audio SDI Audio monitor SD VTR Chapter 1 Overview 1-3
Streszczenie treści zawartej na stronie nr. 8
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panels There are three control panels, as follows: •Upper control panel • Lower control panel •Switch panel Z Upper control panel (see page 2-2) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC Lower control panel (see page 2-3) CONTROL PANEL Switch panel (access by opening the lower control panel) (see page 2-14) KEY INHI PANEL SEL ON OFF REAR FRONT To open the lower control panel To clos
Streszczenie treści zawartej na stronie nr. 9
Chapter 2 Location and Function of Parts 2-1 Control Panels 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button 4 Format indicators Cassette compartment MPEG IMX Digital BETACAM HDCAM REMOTE POWER EJECT 1(9P) 2(50P) RS-232C Z PHONES 5 PHONES jack and control 1 POWER switch 4 Format indicators Pressing the ‘ ) ’ side of the switch powers the unit on. The indicator (MPEG IMX, Digital BETACAM, or When the unit is powered on, the audio setting display HDC
Streszczenie treści zawartej na stronie nr. 10
Chapter 2 Location and Function of Parts 2-1-2 Lower Control Panel 4 Time data/menu display section (see page 2-7) 2 CHANNEL CONDITION 5 MULTI CONTROL knob and PUSH/ indicator (see page 2-6) SHIFT indicator (see page 2-8) 1 Audio control section 3 Menu control buttons 6 RESET button (see page 2-8) (see page 2-4) (see page 2-6) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC 7 Search control section (see page 2-8) 8 REC INHI indicator (see page 2-10) 9 Tape transport control sectio
Streszczenie treści zawartej na stronie nr. 11
Chapter 2 Location and Function of Parts 2-1 Control Panels For information about how to operate in input signal 1 Audio control section selection mode, mixing setting mode, and monitor signal selection mode, see the descriptions of the audio monitor 1 Audio selection function selector buttons signal selection buttons 4 on page 2-5. 2 DISPLAY FULL/FINE button 2 DISPLAY FULL/FINE button 3 Audio setting display section Pressing this button toggles the display mode of the 4 Audio monitor level me
Streszczenie treści zawartej na stronie nr. 12
Chapter 2 Location and Function of Parts Mixing setting mode (the MIX indicator flashes): DATA indicator: Lights when the audio output The buttons in the lower row (REC row) select the signals are recognized as data with the unit in 1) tracks (audio channels on the tape) to contain the recording, E-E , or playback mode. mixed signals. In the audio setting display section, MIX (mixing) indicator: Flashes when a mixing the MIX indicator for the corresponding track setting operation is enabled for
Streszczenie treści zawartej na stronie nr. 13
Chapter 2 Location and Function of Parts 2-1 Control Panels To monitor CH5 to CH8 in MPEG IMX playback, 3 Menu control buttons press the CUE button to switch between CH1 to CH4 and CH5 to CH8, and then select the desired These buttons are used for function menu (see the channels. following section “Overview of the function menu”) and setup menu (see Chapter 10) operations. The page 5 REC (recording) controls buttons (V, v, and HOME) select menu pages, and the These individually adjust the reco
Streszczenie treści zawartej na stronie nr. 14
Chapter 2 Location and Function of Parts Time data type indicator 4 Time data/menu display section This indicates the type of data displayed in the time data display area 1. 1 Time data display LTC (longitudinal time code): Time code recorded on a longitudinal track on the tape 59.94 LUB: LTC user bit values VITC (vertical interval time code): Time code 1 VID. IN PB/EE CONFI CTL/TCMENU TCGSET recorded in the vertical blanking interval SDI EE DISABL TC VIUB: VITC user bit value 2 Menu display D
Streszczenie treści zawartej na stronie nr. 15
Chapter 2 Location and Function of Parts FORWARD VAR 2-1 Control Panels CONFI (ON)/PREREAD indicators 2 Menu display 1) These indicate the state of the VTR CONFI playback This displays the function menu and setup menu. function. When the CONFI playback function is For details on the function menu, see Chapter 9 and for enabled, the CONFI indicator appears, and when details on the setup menu, see Chapter 10. CONFI playback is actually being carried out the ON indicator also appears. When F6 (PR
Streszczenie treści zawartej na stronie nr. 16
Chapter 2 Location and Function of Parts Playback modes using the search dial 1 SHUTTLE button Playback mode Operations and functions To use the search dial for playback in shuttle mode, press this button, turning it on. Shuttle Press the SHUTTLE button or the search dial so that the SHUTTLE button lights, then turn the search dial. For details of playback in shuttle mode, see the description Playback is carried out at a speed of the search dial 5. determined by the position of the search dial.
Streszczenie treści zawartej na stronie nr. 17
Chapter 2 Location and Function of Parts 2-1 Control Panels Cuing up edit points 8 REC INHI (recording inhibit) indicator Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button while pressing this button to cue up to the This indicator is on or off according to the corresponding edit point. combination of the F5 (RECINH) setting on function menu page 4 and the record inhibit plug on the 2 REC (record) button cassette, as shown in the following table. When this To start recording, press this butt
Streszczenie treści zawartej na stronie nr. 18
Chapter 2 Location and Function of Parts 5 STOP button q; Editing mode setting section To stop recording or playback, press this button, turning it on. When you stop playback, the unit switches either to still playback or to E-E mode according to the setting 1 ASSEMBLE button on function menu HOME page for F2 (PB/EE) and the setting of setup menu item 108. ASSEMBLE INSERT VIDEO TC CH1 CH2 CH3 CH4 CUE Fault display function The STOP button flashes in the following cases related 2 INSERT buttons
Streszczenie treści zawartej na stronie nr. 19
Chapter 2 Location and Function of Parts 2-1 Control Panels qa ALARM indicator and KEY INHI qd Editing control section indicator 1 DMC EDIT button ALARM indicator This lights when a hardware error is detected on the 2 MEMORY indicator unit, and goes off when the error is resolved. 3 DELETE button When this indicator is lit, an error message appears in 4 TRIM buttons the time data/menu display section. If you are using 5 Edit point setting buttons the HDSDI OUTPUT 3 (SUPER), SDI OUTPUT 3 (SUPE
Streszczenie treści zawartej na stronie nr. 20
Chapter 2 Location and Function of Parts 4 TRIM buttons 7 AUTO (automatic) EDIT button Use these buttons to trim an edit point to single-frame After edit point setting, to carry out automatic editing precision. (recording), press this button, turning it on. Hold down the IN, OUT, AUDIO IN, or AUDIO OUT If the IN point is not set, the automatic editing is button, and press one of these buttons. The ‘+’ button carried out with the point where you pressed this advances the corresponding edit point
