Streszczenie treści zawartej na stronie nr. 1
Order Number MAC0507002C1
Vacuum Cleaner
MC-V5210-00
Specifications are subject to change without notice for further improvement.
© 2005 PANASONIC HOME APPLIANCES
COMPANY OF NORTH AMERICA, DIVISION
OF PANASONIC CORPORATION OF NORTH
AMERICA. All rights reserved. Unauthorized
copying and distribution is a violation of law.
Streszczenie treści zawartej na stronie nr. 2
1 WIRING DIAGRAM AND DRAWING 1.1. Wiring Diagram 1.2. PICTORIAL DIAGRAM NOTE: For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical compo- nent or electrical enclosure, the unit should be reassembled and checked for dielectric breakdown or current leakage. 2
Streszczenie treści zawartej na stronie nr. 3
2 EXPLODED VIEW AND PARTS LIST 2.1. Body 2.1.1. Exploded View 3
Streszczenie treści zawartej na stronie nr. 4
2.1.2. Parts List (Body) Ref. No. Part No. Part Name & Description Quantity Remarks 1 AC88KCUDZV07 Dust Container Machined 1 Includes items 38, 45 and 46 2 AMC98E-V000U Switch ON/OFF 1 Includes item 38 and 46 3 AC94EAPNZY02 Power Cord 1 Includes items 38, 44 and 46 4 AMC-1CTCE23 Wire Nut 4 Shipped 10 per package 5 AC66KV01V06 Packing Dust Container 2 6 AC03EV06V06 Switch Cover 1 Includes item 38 and 46 7 AC73KV0ZV06 Packing Switch Cover 1 8 AXTN4+16BFY Switch Cover Screw 2 Shipped 10 per package
Streszczenie treści zawartej na stronie nr. 5
2.2. Nozzle Housing 2.2.1. Exploded View 5
Streszczenie treści zawartej na stronie nr. 6
2.2.2. Parts List (Nozzle Housing) Ref. No Part No. Part Name & Description Quantity Remarks 1 AC01ACUDZUU3 Nozzle Housing 1 2 AC10ACRSZV07 Furniture Guard 1 3 AC21HCRSZU03 Window 1 4 AMC25S-V00 Plastic Shaft 1 5 AC34PAJDZV06 Nozzle Hose 1 6 AC43AAFY200 Bracket Assembly 1 7 AXTN4+16BFY Screw 4 Shipped 10 per package 8 AC47A2VZV07 Pedal 1 9 AC58AAFVZ00 Spring (Pedal) 1 10 AMC51A-2V0 Shaft (Pedal) 1 11 AC11S2VZW00 Belt Cover Assembly 1 12 AC62FAVGZ00 Belt Cover Washer 2 Shipped 10 per package 13AC
Streszczenie treści zawartej na stronie nr. 7
2.3. Packing Material 2.3.1. Exploded View 2.3.2. Parts List Ref. No. Part No. Part Name & Description Quantity Remarks 1 AC61ZCCAZ000 Packaging Assembly 1 Includes 1 and items a-g 2 AC01ZCUDZ000 Operating Instructions 1 7
Streszczenie treści zawartej na stronie nr. 8
3 REPLACEMENT INSTRUCTIONS 3.1. Lower Plate Replacement 3.2. Belt Replacement 3.1.1. Removal 3.2.1. Removal 1. Before servicing any parts, disconnect vacuum from elec- 1. Remove lower plate. trical outlet. 2. Lift rear belt cover and remove agitator holder. 2.Place paper under nozzle whenever lower plate is removed to protect floor. 3. Place handle in upright position and turn vacuum over to expose lower plate. 3. Remove agitator by carefully lifting out. 4. Remove worn or broken belt. 4. Releas
Streszczenie treści zawartej na stronie nr. 9
3.3. Agitator Assembly 3.4. Brush Replacement 1.The agitator brushes should be replaced when the Replacement brushes are worn. Brushes should be checked by holding a card across the lower plate. If the bristles on the agitator 3.3.1. Removal assembly do not touch the card you should replace all the 1.The brushes are replaceable separately. When the brushes for best cleaning results. brushes need replacing, the agitator assembly will have to be removed. 2.Remove the lower plate as outlined in the
Streszczenie treści zawartej na stronie nr. 10
6. Lift up on the nozzle housing, plastic shaft side first. 7. The nozzle housing can now be easily rotated from the motor shaft. 7. Install new brushes by reversing procedure. NOTE: If the motor case cover is removed, DO NOT turn 8. Reinstall agitator holder and agitator pulley completely. vacuum over as the motor may fall out. 9. Reinstall the agitator shaft, end cap and E-clip. 3.5.2. Installation 10. Position belt over agitator pulley on the agitator. 11. Reinstall agitator and lower plate.
Streszczenie treści zawartej na stronie nr. 11
3.6. Power Cord / On-Off Switch 3.7. Thermal Overload Replacement Replacement 3.6.1. Removal 3.7.1. Removal 1. Remove the dust cover and switch cover to expose the 1. Remove motor, as shown in motor replacement section. electrical connections of the power cord, on-off switch 2. Remove wire nut from the lead wire that contains the ther- and wire cord. mal protector. Remove old thermal protector and replace 2. Remove the flat washer and cord retainer. Remove the with new thermal protector. Reconn
Streszczenie treści zawartej na stronie nr. 12
3.8.2. Installation 1. Place the motor back into the dust compartment with motor flange positioned as illustrated. 2. Rewire per the Pictorial Diagram. 3. Replace the motor case and the four (4) screws. 4. Turn the vacuum back over and replace the plastic shaft, nozzle housing, belt, agitator assembly, and lower plate according to the respective installation instructions. 12
