Streszczenie treści zawartej na stronie nr. 1
Self-Propelled
WARRANTY
(See Copy Where Product Sold)
WindTunnel’”
v
l
with Powered
Hand Tool by
HOOVER
This WindTunnel’” vacuum cleaner
takes HOOVER@ Type “Y” Allergen
Filtration filter bags
This product was designed for
easy Assembly (See page 3)
Streszczenie treści zawartej na stronie nr. 2
Review this manual before Owner’s Manual ENGLISH + pp.l-14 operating cleaner + 15-22 23-30 1 Fill in and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warran
Streszczenie treści zawartej na stronie nr. 3
Index 3-4 Assembling Cleaner 3 Carton Contents How To Use 5 Cleaner Descriptions 7-6 Cleaning Tools 6 Embedded Dirt Feature 5-7 Upright Cleaner 5 Self-Propel Feature 2 Important Safeguards Maintenance 13 Authorized Service Cleaning Filters 9 12 Lubrication Replacing Belts 10-11 Replacing Power Hand Belt.. Replacing Brush Roll 10,ll Replacing Power Hand Tool Agitator Brush Roll.. Replacing Edge Groomers Replacing Filter Bag 8 Replacing Headlight 9-10 Thermal Protector 12 Trouble Shooting .I3 13-
Streszczenie treści zawartej na stronie nr. 4
Remove switch lock (B) above Slide handle into back of cleaner. OFF switch (C) on front of handle by Push screws into holes on back of pulling it straight out. Dispose of handle. Looking at the back of the cleaner, lock. Using a Phillips screw driver, tighten make sure switch (A) is in the OFF If switch lock has come off during screws securely. assembly, make sure switch is in OFF position (down) before plug- ging cord into electrical outlet. Remove label (D) from self-propel NOTE: Hose must be
Streszczenie treści zawartej na stronie nr. 5
Cleaner description The assembled cleaner will height control: slide knob to correct setting for height of 1. Handle carpet being cleaned. 2. Self-propel button 14. Headlight 3. ON-OFF switch 15. ‘Dirt FINDER’ display 4. Hose 16. Embedded ‘Dirt FINDER’ 5. Tool cover sensitivity switch 6. Powered hand tool 17. Check bag indicator 18. Bag door 8. Handle release lever: hooks: step on lever to lower cord around hooks for 184 handle to operating or storage. The top hook low positions. can be rotated
Streszczenie treści zawartej na stronie nr. 6
Handle positions Carrying cleaner The handle of your cleaner has three The cleaner can be moved by using feature upright for storage and when the carrying handle located on the back W ith red and green lights (A), the ‘Dirt using cleaning tools; operating posi- FINDER’ system alerts the user to areas tion for general operation on carpet of carpet that may need more cleaning and floors; low for reaching under low attention. It is able to sense when larger amounts of dirt particles, especially Ste
Streszczenie treści zawartej na stronie nr. 7
BRUSH ROLL Cleaning lightweight IEdge cleaning Automatic brush roll flexible rugs Special edge groomers are provided indicator _ on both sides of the front of the cleaner Stand on one end ot rug move When red is in the OFF window, brush to remove dirt in carpet near base- cleaner toward other end or edge. roll is STOPPED. boards and furniture. Before reaching edge, push down on When red in the ON window brush roll handle. This will lift up the front of Guide either side parallel to the edge of
Streszczenie treści zawartej na stronie nr. 8
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure contin- ued cleaning effectiveness. G D Filter bag When to replace Check filter bag from time to time. Change the filter bag when dirt reaches the dotted line. If more dirt than this Check bag indicator accumulates, your cleaner will not oper- (some models only) The indicator (I) will begin to show red as Note: All new carpet has loose fibers the filter bag fills with dirt. which can fill th
Streszczenie treści zawartej na stronie nr. 9
Secondary and final filters Replacing bag door Reposition bag door by placing tab on Cleaning secondary Replacing final filter bottom of door into opening (C). filter The Press top of door to snap securely shut. process to return clean air to the room. Disconnect cleaner from electrical outlet. The pleated filter will become dirty and needs to be replaced about once a year The secondary filter (A), to maintain efficient filtration. The 3 layer behind the grill in the bottom of bag filter (some
Streszczenie treści zawartej na stronie nr. 10
Belt replacement The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sure they are in good condition. The flat (wide) belt is described below; the other is described under “Brush roll When to replace Disconnect cleaner from electrical Replacing flat belt Warning - Brush roll can start suddenly. Unplug cleaner when it Removing bottom plate is turned over. Disconnect cleaner from electrical To check the flat belt, remove bottom plate as shown i
Streszczenie treści zawartej na stronie nr. 11
Inspecting V-belt Positioning belt on Replacing brush roll The V-belt is designed to last for a long brush roll time and is not normally replaced. Removing brush roll Before positioning belt onto brush However, if V-belt is cracked, gouged or roll, check for debris accumulation as Slide Brush Roll Control (Fig. 2-9) to broken, now is a good time to replace it described in Fig. 4-2. Insert brush roll through belt and posi- Slide flat belt off large pulley as shown in Turn cleaner over and remove
Streszczenie treści zawartej na stronie nr. 12
6. With curved ends down, slide end 7. Replace belt guard (B) making sure 8. To replace bottom plate (A), insert the plates (C) of brush roll into slots (E) on not to pinch brush bristles in guard. Turn four tabs on edge of bottom plate into agitator, making sure it rotates freely. slots on front of tool. Replace and tighten screws. Pivot bottom plate down and snap Replacing belt Powered hand tool When replacing belt, ask for HOOVER Belt replacement part No. 38528037. The powered hand tool belt
Streszczenie treści zawartej na stronie nr. 13
Service To obtain approved HOOVER service and genuine HOOVER parts, locate the Possible Cause If a minor problem occurs, it usually can nearest Hoover Factory Service Center Possible Solution be solved quite easily when the cause or Authorized Hoover Warranty is found by using the checklist below. much pressure being applied to Service Dealer (Depot) l checking the Yellow Pages under l Continue using tool applying “Vacuum Cleaners - Household” pressure Possible Cause OR- Possible Solution l Bl
Streszczenie treści zawartej na stronie nr. 14
Full Two Year Warranty (Domestic Use) Your HOOVER@ appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of two full years from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in correct operating con- dition during the warranted period. This Checking under bottom plate warranty applies when the appliance is 5. Remove bottom plate ( Fig. 3-9)
