Instrukcja obsługi RCA RCR4373

Streszczenie treści zawartej na stronie nr. 1

RCR4273 / RCR4373
Universal Remote Control
Owner’s Manual
Manual del Propietario (parte posterior)
Four-Component
INFO key Component Universal Remote
keys (TV,
displays
Congratulations on your purchase of this four-component
SAT•CBL,
information
for the DVD•VCR, universal remote. This universal remote controls up to four
component DVR•AUX) electronic components and makes juggling remote controls
you’re a thing of the past. Your remote is guaranteed to work with
controlling
all brands

Streszczenie treści zawartej na stronie nr. 2

Notes: The RCA Easy Interactive Code Finder • To program the DVD•VCR key to control a VCR, see page 3. The online interactive code finder at www.rca.com/codefinder makes it • To program the DVR•AUX key to control a component other than easier to find exactly the right codes for your components. The code finder a DVR, see page 4. takes you right to the best code(s) for your component—no need to go through long code lists! 3. Press and hold the component LED key (TV, SAT•CBL, DVD•VCR, T

Streszczenie treści zawartej na stronie nr. 3

Direct Code Entry Manual Code Search and Entry To use the direct code entry method to program your universal If your component’s brand isn’t listed in the Code Lists, or if remote to control your components, follow the steps below. you have tried all of the codes for your brand and the remote does not operate your component, try one of the Code Search 1. Manually turn on the component you want the remote to methods below—Manual Code Search or Auto Code Search. control (TV, VCR, DVD, DVR, s

Streszczenie treści zawartej na stronie nr. 4

3. While holding the component key down, press and hold the Testing the Code for Maximum Functionality POWER key. The LED turns off. After holding down both Different remote control codes can provide different levels keys for three seconds, the LED turns back on. of functionality. To confirm that the component key is programmed with the correct code for maximum functionality, 4. Release both keys. The LED remains on. follow the steps below. Note: If you press an invalid key during Auto C

Streszczenie treści zawartej na stronie nr. 5

Note: If you press an invalid key during the Code Retrieval process, Testing the Code for Maximum Functionality the remote will not respond. If you do not press a valid Code Different remote control codes can provide different levels of Retrieval key (TV, SAT•CBL, DVD•VCR, DVR•AUX, INFO, functionality. To confirm that the component key is programmed CLEAR), Code Retrieval times out after 15 seconds. The LED with the correct code for maximum functionality, follow the blinks four times, and

Streszczenie treści zawartej na stronie nr. 6

• Make sure the batteries are fresh and are properly installed. (See Troubleshooting Battery Installation on page 1.) Replace the batteries with two new AAA batteries, if necessary. Reprogramming may be required. Problem: The remote does not operate your component. • You must put the remote in the correct mode by pressing the Problem: The VCR won’t record. corresponding component key (TV, SAT•CBL, DVD•VCR, • Make sure the remote is in DVD•VCR Mode. DVR•AUX) so the remote knows which compon