Streszczenie treści zawartej na stronie nr. 1
Contents
Quick Start 4
Intelligent Remote Controller
USR-5RF
Instruction
Before Using 7
Manual
Operations 11
Thank you for purchasing the Onkyo Intelligent
Remote Controller. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable you
Other Information 39
to obtain optimum performance and listening enjoyment
from your new Intelligent Remote Controller. Please
retain this manual for future reference.
Streszczenie treści zawartej na stronie nr. 2
Precautions Care (1) This device may not cause harmful interfer- From time to time you should wipe the front and ence, and (2) this device must accept any inter- rear panels and the cabinet with a soft cloth. For ference received, including interference that may heavier dirt, dampen a soft cloth in a weak solu- cause undesired operation. tion of mild detergent and water, wring it out Changes or modifications not expressly ap- dry, and wipe off the dirt. Following this, dry proved by the party re
Streszczenie treści zawartej na stronie nr. 3
Table of contents Quick Start .................................................................................................................. 4 Quick Reference.......................................................................................................... 5 Introduction ................................................................................................................ 7 1. Intelligent remote controller ....................................................................
Streszczenie treści zawartej na stronie nr. 4
Quick Start Insert batteries Operate your components Insert 4 AA batteries according to the picture on Fresh out of the box, the remote controller is the inside of the battery compartment. already set up to work with popular components or made by Onkyo. Programming the remote Use a rechargeable battery pack (sold separately). controller is easy: Add components to the Device (Remove the AA battery tray first). Before using menu as necessary. Then, program the commands the remote controller, be su
Streszczenie treści zawartej na stronie nr. 5
Quick reference Quick reference 5. Panel number Shows what panel you’re seeing. 1 11 6. Left and Right buttons Activate the commands shown immediately above the buttons – CONT + 7. Scroll button MUTE 10 Display next Control Panel. Scroll buttons may 2 LIGHT appear on left. 3 + 9 CH 8. Mode menu – Customize the remote controller (see below) 4 VOL 8 5 7 6 9. Device menu Open a component’s control panels 1. Sending eye (IR transmitter)/Learning eye Send commands to devices For learning commands fr
Streszczenie treści zawartej na stronie nr. 6
Quick reference Modes 1 2 3 4 5 6 7 8 1. Normal use controlling components. 2. Learn commands from other remote controllers. When a macro panel is displayed, this button changes to REC for recording macros. 3. Assign letters and symbols to buttons and commands. 4. Add a new component or group of macros. 5. Delete a button, component, macro, or macro group. 6. Change the order of commands in a menu. 7. Define the brands of your device. 8. Configure the remote controller to operate devices with RF
Streszczenie treści zawartej na stronie nr. 7
Introduction Sending eye/Learning eye Direct-access buttons Contrast dial Touchscreen Left/Right buttons Backlight button Reset button Serial port Battery cover Direct-access buttons 1. Intelligent Remote The buttons labeled MUTE, CH, and VOL are Controller direct-access buttons. The direct-access buttons The intelligent remote controller can be used for make these frequently used functions available all devices that understand infrared remote even when the touchscreen is off. You can controller
Streszczenie treści zawartej na stronie nr. 8
Introduction 1. Home: to go to the Home menu Left and Right buttons 2. Macro menu: to open stored list of commands The Left and Right buttons change function depending on the device the remote controller is controlling. Labels displayed above them on the touchscreen show their current function. Touchscreen buttons Buttons on the touchscreen let you control particular devices. You activate the buttons by 3. Control panel: to send commands to components tapping them with your finger. 4. Panel numb
Streszczenie treści zawartej na stronie nr. 9
Introduction 3. Slide the battery cover back on. 2. Charging the Remote After a few seconds, the remote controller Controller starts up automatically and beeps twice to indicate that it is ready to use. AA batteries When batteries are running low, the Low Battery 1. Slide the battery cover off the back of icon blinks at the center top of the display. the remote controller. Replace the batteries as soon as possible to ensure perfect performance. Note: The remote controller retains all settings w
Streszczenie treści zawartej na stronie nr. 10
Introduction Optional recharging dock 4. Slide the battery cover back on. After a few seconds, the remote controller Warning: starts up automatically and beeps twice to Use the recharging dock only with the NiMH indicate that it has finished starting up. rechargeable battery pack of BCC-5. 5. Plug the power adapter into a wallet 1. Slide the battery cover off the back of outlet and connect it to the the remote controller. recharging dock. 2. Remove the plastic AA battery tray from the battery co
Streszczenie treści zawartej na stronie nr. 11
Getting Started 1. Activate the remote 2. Define the Brand of Your controller Device The remote controller uses RC codes to activate device. Since there are several brands using Turning on the display specific RC codes, you have to define the brands of your devices. Tap the screen gently with your finger or a blunt, soft object like a pencil In the Home menu, you find buttons for the most eraser. common video and audio devices. The remote The display is activated and you see the Home controll
Streszczenie treści zawartej na stronie nr. 12
Getting Started When you operate Onkyo’s CD player, Note: DVD player, MD recorder or CD recorder Before you start using the remote controller, which has no connectors or is not make sure you define the brand for each device connected using interface, you need to you want to operate in the Home Menu. define the brand of your device. 1. In the Mode menu, select Brand. 2. Select the device you want to define. Defining brands by selecting 3. Select Next. The brand selection screen appears. A list
Streszczenie treści zawartej na stronie nr. 13
Getting Started To enter a space, tap the lower left corner of 4. Navigate through the list of brands. the keyboard. When the keyboard is zoomed Use the scroll buttons to scroll up or down in in, tap the empty key. the list of brands. After you have typed the character, the • By tapping the scroll buttons, you scroll keyboard is zoomed out. Repeat this action through the brands one by one. By for every character. touching and holding the scroll buttons, the Every time you enter a character, the
Streszczenie treści zawartej na stronie nr. 14
Getting Started Note: 6. Tap Next. However, your device is responding to the When your brand uses only one set of RC current code set, it is recommended to try codes, the remote controller switches to Try other code sets. When your device responds mode. Go to step 9. to more than one code set, install the most When there are several code sets for your suitable one. brand, the following screen appears. 10. If you are not satisfied with the way the device is responding to the selected code set, t
Streszczenie treści zawartej na stronie nr. 15
Getting Started Defining brands by searching 6. Tap OK when the device reacts. You can use Search mode to find the matching Notes: RC codes for your device when • Even when the device is responding to the • your brand is not displayed in the list of current code set, it is advised to try other code brands, sets. When your device responds to more than one code set, install the most suitable one. • you selected your brand, but you do not know which code set to select. • The name of the responding
Streszczenie treści zawartej na stronie nr. 16
Getting Started 3. Select a Device Device tab Via the Home menu In the Home menu, you find buttons for the most common video and audio devices. These buttons are preprogrammed to work with popular devices made by Onkyo. If you have devices of other manufacturers that do not respond to your remote controller, you can program your remote controller using your original remote controllers (see “Programming Buttons” on page 23). Device menu Tap the device you want to operate. The first control pan
Streszczenie treści zawartej na stronie nr. 17
Getting Started Operating a device without affecting the 4. Operate a Device active device You operate devices using three kinds of buttons: You can operate a device while another device is active (for example, rewinding your VCR while Touchscreen buttons watching TV) via the Device menu: Left and Right button (below the touchscreen) 1. Open the device menu. Direct-access buttons (to the right of 2. Press and hold the Left or Right the touchscreen) button (labeled NO IR). The remote contr
Streszczenie treści zawartej na stronie nr. 18
Getting Started Using the Left and Right button Using the direct-access buttons The Left and Right buttons change function MUTE, CH and VOL can be operated at any time, depending on the device the remote controller is even without turning on the touchscreen. operating. The current function is displayed on the touchscreen right above the button. The function can be either an IR (infrared) command that is transmitted, or a jump to a specific device page. IR commands Device pages 18
Streszczenie treści zawartej na stronie nr. 19
Getting Started 5. Adjust the Settings Most of the remote controller’s features can be set to your own needs. 1. Touch and hold the remote controller icon for a few seconds. The first setup panel appears. You can see the second and third setup panel by using the scroll buttons. 2. Tap the button of the setting you want to adjust. The button becomes black. 3. Use the Left and Right button to adjust the setting. Note: Tap the Left and Right buttons are repeating buttons; holding down one of these
Streszczenie treści zawartej na stronie nr. 20
Getting Started Second setup panel Setting Function Adjusting Level Turns the backlight always on or off Always on: Tap the Level button and when activating the touchscreen. position the indicator in the left half of Note: When you choose always off, the indication bar using the Left you can only activate the backlight button. using the backlight button. Always off: Tap the Level button and position the indicator in the right half of the indication bar using the Right button. Mode Menu Hides or
