Streszczenie treści zawartej na stronie nr. 1
RCRPS06GR
Owners Manual
Manual del usuario
English
1. Install batteries ........................................2
Battery Saver ...........................................2
2. Program the remote ...............................3
Brand Code Search .................................3
Direct Code Entry ....................................6
Auto Code Search ...................................7
Manual Code Search ..............................9
3. Program Your Preset Channels ............12
Tour of the
Streszczenie treści zawartej na stronie nr. 2
1. Install batteries Your universal remote requires two AAA alkaline batteries (not included). To install the batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the (+) and (–) marks inside the battery compartment. 3. Push the battery cover back into place. Battery Precautions: � Do not mix old and new batteries. � Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. � Always remove old, weak or worn-out batter
Streszczenie treści zawartej na stronie nr. 3
ENGLISH 2. Program the remote To use this universal remote with your home entertainment system, fi rst you need to program it to control your devices. There are four ways you can program the universal remote to operate your devices: � The Brand Code Search searches through the codes for select brands of devices. If your brand is listed in the Brand Code section of the code list, try this method fi rst. � The Direct Code Entry searches through the codes for select brands of devices. Note:
Streszczenie treści zawartej na stronie nr. 4
1. Manually turn on the device you want to control. 2. Find your device’s brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy. 3. Press and hold the device key you want to program (the POWER key illuminates). While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time (the POWER key turns off). 4. Wait until the POWER key comes on and stays on. Then r
Streszczenie treści zawartej na stronie nr. 5
ENGLISH NOTES: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Brand Code Search, the remote ignores keypr
Streszczenie treści zawartej na stronie nr. 6
Direct Code Entry Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT�CBL�STREAM for satellite receivers, digital TV converters, cable boxes, and streaming media players, DVD for DVD players, DVR�AUX1 for DVRs, VCR�AUX2 for VCRs, and AUDIO for audio receivers. To program the DVR�AUX1 or VCR�AUX2 key for a different type of device, see the Reassi
Streszczenie treści zawartej na stronie nr. 7
ENGLISH NOTES: Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code in the list. Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual. If your brand isn’t listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.) If you releas
Streszczenie treści zawartej na stronie nr. 8
3. Wait until the POWER key comes on and stays on. Then release both keys. 4. Point the remote directly at the front panel of the device you want to control. Press SLOW on the remote and wait 5 seconds. The remote is sending a batch of 10 codes on your device. Did your device turn off? YES: Go to step 5. NO: Press SLOW again. The remote sends the next batch of 10 codes. Keep pressing SLOW every 5 seconds until your device turns off. 5. When your device turns off, press the SKIP
Streszczenie treści zawartej na stronie nr. 9
ENGLISH The search times out after two minutes (the POWER key blinks four times and the last programmed code under that device key is retained). The POWER key blinks four times when the remote has gone through all the codes. The remote exits the Auto Code Search. If your device hasn’t turned off yet, try a different search method. Testing the Code for Maximum Functionality 1. Try a variety of the device’s functions with the remote. If some device features don’t work, go to the next step
Streszczenie treści zawartej na stronie nr. 10
1. Manually turn on the device you want to control. 2. Press and hold the device key you want to program (the POWER key illuminates). While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time (the POWER key turns off). 3. Wait until the remote’s POWER key comes on and stays on. Then release both keys. 4. Point the remote directly at the front panel of the device you want to control. Press SKIP FWD on the remote and wait 2
Streszczenie treści zawartej na stronie nr. 11
ENGLISH NOTES: Throughout the programming of each key, keep the remote pointed at the device you are programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Manual Code Search, the remote ignores keypresses that aren’t part of the search.
Streszczenie treści zawartej na stronie nr. 12
3. Program Your Preset Channels This remote control gives you access to up to 10 of your favorite satellite/cable and TV channels instantly, using the Preset Keys. For example, if one of your favorite channels is ESPN, you can set up this remote to take you directly to that channel when you press the P key followed by the 1 key. To use the Preset Channels feature, fi rst you must program the channel you’d like to use for each Preset key. Before you start, use the following table to gathe
Streszczenie treści zawartej na stronie nr. 13
ENGLISH To program your Preset Channels: 1. Press and hold the P key. The Power key illuminates. Continue to hold for three seconds until you see a blink of the Power key LED. The light remains illuminated and now you can release the P key. 2. Press the 1 key to program your fi rst preset channel. The POWER key fl ashes once and stays on. 3. Press the device key listed for this channel (TV or SAT�CBL�STREAM). NOTE: The device key you press in step 3 must be programmed to control y
Streszczenie treści zawartej na stronie nr. 14
Preset Programming Notes � To quit programming preset channels at any time, press the EXIT�BACK key. The POWER key fl ashes 4 times. No changes to the Preset keys are made. � When you’re programming presets, the remote gives you a maximum of 15 seconds between key presses before it leaves programming mode and goes back to normal operation. The POWER key fl ashes 4 times—this means the remote has not saved your programmed presets and you’ll have to start again. � During preset channel prog
Streszczenie treści zawartej na stronie nr. 15
ENGLISH Tour of the Remote In most cases, the keys on this remote perform the same functions as the keys on your original remotes once you’ve programmed this remote to operate your components. Many keys on this remote have other functions as well. Illuminated POWER key serves as an indicator light to provide feedback. Device keys (TV, SAT�CBL�STREAM, DVD, DVR�AUX1, VCR�AUX2, AUDIO) put the remote in the right mode to control your device. CHAN PRESET MODE lets you program your favo
Streszczenie treści zawartej na stronie nr. 16
IMPORTANT: Because this remote controls more than one device, you must fi rst “tell” the remote which device you wish to operate. That means, if you wish to operate your TV, you must fi rst press the TV key to put the remote in the TV Mode. The remote stays in that device mode until you press a different device key. For example, if your remote is in TV Mode and you want to operate the DVD player, you must press the DVD key to change device modes. Backlighting Backlight illumination helps
Streszczenie treści zawartej na stronie nr. 17
ENGLISH To enable Master Power again: 1. Press and hold the P key for 3 seconds. The POWER key comes on. 2. Press VOL+ to enable Master Power again. 3. Press the P key to confi rm. The Master Power function is enabled again. Reassigning the DVR�AUX1 or VCR�AUX2 Key The DVR�AUX1 key defaults to control a DVR, and the VCR�AUX2 key defaults to control a VCR. If you want the DVR�AUX1 or VCR�AUX2 key to control a different device (an additional TV, DVD, satellite or cable box, for example),
Streszczenie treści zawartej na stronie nr. 18
Advanced Punch-Through Volume punch-through as described above occurs automatically. Advanced punch-through lets you specify one device for all volume commands for each non-audio mode (SAT�CBL�STREAM, DVD, DVR�AUX1, or VCR�AUX2). You can specify either the TV or AUDIO device (or an AUX key operating a TV or audio device). 1. Press and hold the device key whose volume commands you want to send to the TV or audio device. The POWER key turns on. 2. While holding down the device key, press
Streszczenie treści zawartej na stronie nr. 19
ENGLISH Channel Lock Channel lock automatically sends channel commands, like the CH, PREV CHAN, and 0–9 number keys, to your satellite receiver, cable box, or digital TV converter when you’re in TV mode. This can save you keypresses if you use a device other than your TV to change channels. To turn channel lock on: 1. Press and hold the device key for the device you use to change channels. While you’re holding down this device key, use your other hand to press and hold the remote’s CH +
Streszczenie treści zawartej na stronie nr. 20
TIPS: All TV codes start with the number 1; all VCR and DVR codes start with the number 2; all DVD player codes, the number 3; all audio device codes, the number 4; and all satellite receiver, cable box, and digital TV converters, the number 5. To exit the Code Retrieval Mode at any time, press the EXIT�BACK key. If you press an invalid key during the Code Retrieval process, the remote will not respond. If you do not press a valid Code Retrieval key (TV, DVD, SAT�CBL�STREAM, DVR�AUX1, V
