Instrukcja obsługi Kicker SOLOX S12X

Streszczenie treści zawartej na stronie nr. 1

AcousticsLimitedWarranty
Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of
THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER
Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the
original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or
malfunction during the warrant

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION Z Amplifier + SeriesWiring Figure 1 Coil 1 + Speaker SOLOXSUBWOOFER Dual 4Ω Voice Coils = 8Ω Load Connection Owner’sManual Dual 2Ω Voice Coils = 4Ω Load Amplifier + Coil 1 + Speaker Connection Models: S12X / S10X Coil 2 -Coil 1 - Authorized Kicker Dealer: _________________________ Congratulations on your KICKER purchase Purchase Date: _________________________ Coil 2 -Coil 1 - Please record your purchase Subwoofer Model Number: _________________________ Amplifier - information and k

Streszczenie treści zawartej na stronie nr. 3

INSTALLATION If you prefer an ultra-smooth bass response, you should loosely fill your SoloX enclosure with VentedEnclosureApplications poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill The SoloX was designed for a vented enclosure. Throw out every experience you have ever had with a cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil vented speaker and prepare to be blown away! Ou

Streszczenie treści zawartej na stronie nr. 4

GARANTIE Wood Template Figure 19 RemovalMountingAssembly (Continued) 1 5 Please follow these instruction to insure proper installation. Fit the SPAIR to the BAM with the 10-24 Acorn Head Bolts. We have enclosed four (4) extra Acorn Head Use a jigsaw or router to cut the woofer cutout. Use a 5/16 or Bolts. See Figure 18. 11/32” (8 - 8.8mm) drill bit for the mounting holes. See Figure 11. 7 3 Note: The following steps require the assistance of Hand tighten the 10-24 Acorn Head another person. Bol