Streszczenie treści zawartej na stronie nr. 1
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 1
RM94906
Universal
Remote Control
INSTRUCTION
MANUAL
Streszczenie treści zawartej na stronie nr. 2
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 2 Table Of Contents Button Description . . . . . . . . . . . . . . . . . . 1-2 Battery Installation. . . . . . . . . . . . . . . . . . . . 2 Programming for TV. . . . . . . . . . . . . . . . . . . 4 Programming for VCR . . . . . . . . . . . . . . . . . 5 Programming for Cable Box or Satellite . . . 6 DVD or AUX Button . . . . . . . . . . . . . . . . . . . 7 Code Search. . . . . . . . . . . . . . . . . . . . . . . . . 8 Retrieving Codes . . . .
Streszczenie treści zawartej na stronie nr. 3
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 3 TV•V CR The TV•VCR button operates the TV•VCR function of your VCR. ENTER The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process. VOL & CHAN The VOL (Volume) and CH (Channel) buttons increase or decrease the channel numbers or vol- ume. The Channel buttons also control DVD SKIP functions. MUTE To MUTE the volume on the TV. PREV CH PREV CH allows you to go to the previous
Streszczenie treści zawartej na stronie nr. 4
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 4 3. Press and slide the battery cover back into place. Note: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required. Button Description 3
Streszczenie treści zawartej na stronie nr. 5
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 5 Programming For TV 1. Manually turn on the TV. INDICATOR SETUP LIGHT 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. BLINK 3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your TV in the TV code list, and enter it using the Number Buttons. After your code is OFF entered, the INDICATOR LIGHT will turn off. 5. A
Streszczenie treści zawartej na stronie nr. 6
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 6 Programming For VCR 1. Manually turn on the VCR. INDICATOR SETUP LIGHT 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. BLINK 3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your VCR in the code list and enter it using the Number Buttons. After your code is OFF entered, the INDICATOR LIGHT will turn off. 5.
Streszczenie treści zawartej na stronie nr. 7
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 7 Programming For Cable Box or Satellite Receiver The CAB • SAT button is defaulted to RCA/GE/ProScan DBS systems, however other DBS systems can be programmed to this button. INDICATOR SETUP 1. Manually turn on the cable LIGHT box or satellite receiver. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. CBL•SAT BLINK 3. Press and release the CBL•SAT button (the INDICATOR LIGHT will blink
Streszczenie treści zawartej na stronie nr. 8
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 8 Programming for DVD•AUX The DVD•AUX button can be used for a DVD play- er. It can also be assigned to any other type of device (another TV, VCR, DVD, CD Player, or audio receiver). 1. Manually turn on the the device you wish to assign to the DVD•AUX button INDICATOR SETUP (TV, VCR or Cable LIGHT Box or DVD Player). 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release DVD•AUX BLINK the SETUP button. 3. Pres
Streszczenie treści zawartej na stronie nr. 9
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 9 Programming With Code Search If your TV, VCR, DVD Player, cable box or satel- lite receiver does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below. 1. Turn on the device INDICATOR SETUP you wish to program. LIGHT 2. Press and hold SETUP until the INDICATOR LIGHT lights, then release SETUP. 3. Press and release the device button for the DV
Streszczenie treści zawartej na stronie nr. 10
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 10 Retrieving Codes If you need to find the three-digit code for your TV, VCR, DVD Player, DBS Receiver, or Cable Box after your device is set-up using Code Search, use this procedure. INDICATOR SETUP 1. Press and hold SETUP LIGHT until the INDICATOR LIGHT lights, then release SETUP. 2. Press and release the device button for the d e v i c e’s code you are retrieving . The DVD•AUX CBL•SAT I N D I C ATOR LIGHT will blink once then remain
Streszczenie treści zawartej na stronie nr. 11
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 11 Television Menu Function The TV Menu is used to make changes in the TV settings such as setting color, channels, timers, etc. Entering the TV Menu Mode: 1. Push the TV button INDICATOR on the remote. LIGHT 2. Push the MENU button. This puts the remote in TV Menu Mode. The TV Menu should now be visible on the television. The INDICATOR LIGHT will blink continuously BLINK to indicate the remote is now in TV Menu Mode. While in TV MENU thes
Streszczenie treści zawartej na stronie nr. 12
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 12 Exiting the TV Menu Mode: To exit the Menu Mode and clear the TV screen push the TV button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of TV Menu Mode and will revert to it’s normal mode of operation. Note:The remote will automatically exit the TV Menu Mode after 10 seconds of inactivity with no buttons being pushed. Special Notes: 1. Because of the wide variety of menu formats, some experimenting
Streszczenie treści zawartej na stronie nr. 13
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 13 DBS Menu Function The DBS Menu is used to navigate thru the Guide screens, to make changes in the DBS set- tings such as channel lists, passwords, etc. Entering the DBS Menu Mode: INDICATOR CBL•SAT 1. Push the CBL•SAT LIGHT button on the remote. 2. Push the MENU button. This puts the remote in DBS Menu Mode. The DBS Menu should now be visible on the television. The BLINK INDICATOR LIGHT will blink continuously to indicate the remote is
Streszczenie treści zawartej na stronie nr. 14
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 14 Exiting the DBS Menu Mode: To exit the Menu Mode and clear the TV screen push the CBL•SAT button CBL•SAT on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of DBS Menu Mode and will revert to it’s normal mode of operation. Note:The remote will automatically exit the CBL•SAT Menu Mode after 10 seconds of inac- tivity with no buttons being pushed. Special Notes: 1. Because of the wide variety of menu format
Streszczenie treści zawartej na stronie nr. 15
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 15 Sleep Feature This feature will turn off your TV at the time you choose from 1 to 99 minutes. To P rogram Sleep Feature: INDICATOR 1. Press and hold the LIGHT SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button. . Enter time in minutes using the numerical key pad. (Minutes 1 thru 9: press 0 before the actual number) (Maximum: 99 minutes) 3. Leave remote aimed at television. (Sleep Feature will not work unless rem
Streszczenie treści zawartej na stronie nr. 16
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 16 Trouble Shooting Problem Solution Indicator light not A) Replace the batteries blinking when you (with fresh, new AAA press any key Alkaline batteries). B) Check that batteries are properly installed. The remote does A) Try all the codes list- not operate your ed for your brand. B) Try the Code Search device method (page 8). Not performing Start Code Search over commands properly again to locate the proper code. Problems programming Try the
Streszczenie treści zawartej na stronie nr. 17
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 17 Problem Solution No response after A) Make sure you have pressing a key new batteries, and you are aiming your remote at your devices. B) Check that batteries are properly installed. See page 2. Sleep feature does Remote must remain not work aimed at television after sleep is set in order for it to work. Reprogramming may be required after batteries are removed. 90 Day Limited Warranty Jasco Products Company warrants this product to be free
Streszczenie treści zawartej na stronie nr. 18
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 18 Óndice La Descripción Del Botón 17-18 Instalación De la Batería 18 Descripcion de Botones 19 Programación para la Televisor 20 Programación para el VCR 21 Programación para la CBL•SAT 22 El Botón de DVD•AUX 23 Programación con Búsqueda del Código 24 Extraer Códigos 25 Función Del Menú De la Televisión 26-27 Función Del Menú De la DBS 28 Característica Del Sueño 29-30 Localización de Averías 30 Garantia Limitada de Noventa 31 Codigo Listas 32-
Streszczenie treści zawartej na stronie nr. 19
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 19 ENTER El botón de "ENTER" se utiliza para terminar la selección de canal para algunas marcas de la TV. También se utiliza para terminar el proceso de la entrada del código. VOL & CHAN Las flechas VOL (volumen) y CH (del canal) aumente o dis- minuya los números de canal o volumen. MUTE Para apagar el volumen en la TV. PREV CH El canal anterior permite que usted vaya al canal anterior que usted seleccionó. Funciona igual que acanalan, van por
Streszczenie treści zawartej na stronie nr. 20
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 20 Descripción de Botón 19
