Streszczenie treści zawartej na stronie nr. 1
RemoteLinc 2
®
INSTEON Remote Control Switch (#2444A3)
Owners Manual
Page 1 of 15 2444A3 Rev: 10/24/2011 10:43 AM
Streszczenie treści zawartej na stronie nr. 2
RemoteLinc 2...............................................................................................................................................3 Features & Benefits ....................................................................................................................................4 What’s in the Box?.....................................................................................................................................4 Required Accessories...........
Streszczenie treści zawartej na stronie nr. 3
RemoteLinc 2 RemoteLinc 2 is the smallest and most versatile INSTEON Remote Control in the world. The 1 Scene Controller can easily be reconfigured to give you toggle control of up to 2 scenes and/or devices. RemoteLinc 2 can be: - Handheld (wireless remote) - Mounted on wall with no trim plate (wireless keypad) - Mounted on wall in a single-gang Decorator trim plate (wireless keypad, built-in look) - Mounted on wall in a multi-gang Decorator trim plate (add to the number of controlle
Streszczenie treści zawartej na stronie nr. 4
Features & Benefits Small, elegant design Super-easy setup Rechargeable battery included Discreet On and Off buttons for 1 Scene Can be reconfigured for 2 Scene triggers or 2 Scene On/Off toggle control Can be installed into a single Decora opening (requires Wall-Mount Bracket) Can be used as a table-top controller (requires Tabletop Stand) Can be used as a visor-mounted remote control for lights, garage door opener etc. (requires Visor Clip) LED blinks green when Turning a Scene On and
Streszczenie treści zawartej na stronie nr. 5
Optional Accessories Wall Mount Bracket (2444B4) Wall mount your RemoteLinc 2 anywhere Gang two or more together for more control Can be installed adjacent to existing wired-in switches RemoteLinc 2 can easily be removed for portability or recharging Use with any decorator wallplate Pair the Wall Mount Bracket with any decorator style wall plate (sold separately) for the perfect wireless wall switch solution. T
Streszczenie treści zawartej na stronie nr. 6
Getting Started Fully charge your RemoteLinc 2 prior to programming or anytime the unit is not responding. RemoteLinc 2 charges via a USB cable (Type A to Micro-B, sold separately). The red charging LED will turn off once the battery has been fully charged (approximately 1 hour). To turn on RemoteLinc 2, simply slide the power switch to the on position. Note: RemoteLinc 2 uses a subtle beeper sound to assist setup. It is recommended that you program the unit in a quiet area. Setting up I
Streszczenie treści zawartej na stronie nr. 7
1) Tap the RemoteLinc 2 switch (top or bottom paddle) - if in 2 scene mode, tap the top of the paddle for scene 1 or the bottom for scene 2 The responder will respond 2) Press & hold the RemoteLinc 2’s Set button until it beeps RemoteLinc 2’s LED will blink GREEN 3) Press & hold the RemoteLinc 2’s Set button until it beeps again RemoteLinc 2’s LED will blink RED 4) Press & hold the Responder’s Set button until it double-beeps (or LED blinks) RemoteLinc 2 will (Beep)-(Beep) and
Streszczenie treści zawartej na stronie nr. 8
LED Behavior RemoteLinc 2 has a two-color LED (Green & Red) which momentarily indicates whether an on or an off is being sent. LED State Meaning Blink Green (Once) On Sent Blink Red (Once) Off Sent Blink Red (for a few One or more scene members did not acknowledge (note: scene members seconds) may still have heard the scene command and adjusted their settings) Turn Unit On/Off (Pocket Mode) The RemoteLinc 2 features a power switch located next to the Set button. If you plan on carryi
Streszczenie treści zawartej na stronie nr. 9
Remove Multiple Responders from a Scene (Multi-Unlink) 1) Tap the RemoteLinc 2 paddle (top or bottom) – if in 2 scene mode, tap the top of the paddle for scene 1 or the bottom for scene 2 2) Press & Hold Set Button for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink GREEN nd 3) Press & Hold Set Button a 2 time for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink RED 4) Tap Set Button RemoteLinc 2’s LED will double-blink RED-RED 5) For each Responder you w
Streszczenie treści zawartej na stronie nr. 10
Flash Pattern Configuration RED every tap 1 Scene GREEN every tap 2 Scene Non-Toggle (Always On) GREEN / RED alternating 2 Scene Toggle Turn LED Off (or Back On) 1) Press & Hold Set Button for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink GREEN nd 2) Press & Hold Set Button a 2 time for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink RED rd 3) Press & Hold Set Button a 3 time for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink GREEN
Streszczenie treści zawartej na stronie nr. 11
Beeper Behavior Beeper Disabled Command Method Beeper Enabled (Default) On Tap - Beep Off Tap - Beep Fast-On Double-Tap - Beep Fast-Off Double-Tap - Beep Begin Bright Press & hold - Beep Begin Dim Press & hold - Beep Setup Action Beeper Enter Setup Mode, Transition to next setup mode or Exit Beep Setup Mode Setup successful, return to Ready Mode Beep-Beep Return to Ready Mode after a longer than 3 minute time- 3 Second ((((((((Beep)))))))))) out Failure to add a scene responder
Streszczenie treści zawartej na stronie nr. 12
5) Continue to Hold Set Button until the long beep stops LED turns solid RED 6) Release Set Button RemoteLinc 2 will (Beep)-(Beep), its LED turns off & returns to Ready Mode Specifications General Product Name RemoteLinc 2 – INSTEON Wireless Switch Brand Smarthome Manufacturer Product Number 2444A3 UPC 813922011616 FCC ID SBP2444A Patent Number 7,345,998 US, International Patents Pending Warranty 1 Year, Limited INSTEON Scenes 1 (default), configurable to 2 Scene Configurations 1
Streszczenie treści zawartej na stronie nr. 13
Beeper Yes, configurable Battery Charging LED Yes, Embedded (shines red through case during charge) RF Range 50’ Line-of-Sight Retains all settings without power Yes, all saved in Non-volatile EEPROM Mechanical Color White Plastic UV Stabilized ABS Button Configurations 1 Scene (standard), 2 Scene (optional button kit) Dimensions 2.6" H x 1.3" W x 0.39" D Weight (w/battery) 1 Oz. Button Style Plastic Paddles over Contact Switches Optional Hardware Wall Mount Tabletop Stand Visor Cl
Streszczenie treści zawartej na stronie nr. 14
Problem Possible Cause Solution Responder’s Load doesn’t appear to turn on right The Ramp Rate may be set too slow. Re-link to responder with fast Ramp Rate away Remove all unused Responders from the RemoteLinc 2. HINT: If you are using home Responder(s) is taking a RemoteLinc 2 may be sending automation software, you can easily check scene long time to respond to a commands to a responder(s) that is no membership and eliminate unnecessary Links RemoteLinc 2 longer in use If the abov
Streszczenie treści zawartej na stronie nr. 15
Certification and Warranty FCC & Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L
