Streszczenie treści zawartej na stronie nr. 1
Remote Control
Remote Control
User Guide
User Guide
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Table of Contents SETUP AND OPERATION Quick Setup Insert the Batteries ..............................................................S-1 Making the Remote Work with Your Receiver...................S-1 Program the Remote to Control Your TV...........................S-2 Placing Your Remote in Limited Mode...............................S-3 Operation If You Lose Your Picture (Using RECOVER) .....................S-3 SAT Mode.............................................................................
Streszczenie treści zawartej na stronie nr. 4
Battery Battery Battery Battery Quick Setup 1 Insert the Batteries 1 2 3 A A B A B B Insert 4 AAA Replace batteries making Pull the the sure to match the remote remote plus (+) ends with battery battery the plus markings cover off. cover. on the battery case. 2 Making the Remote Work With Your Receiver 2 1 Turn your receiver and TV on, and press SYSTEM Confirm that you INFO on the front see the System of the receiver. Info screen. 4 3 RECORD Use the remote to select Done from System In
Streszczenie treści zawartej na stronie nr. 5
Quick Setup Program the Remote to Control Your TV 1 2 Press & hold the TV Mode button Turn your until all Mode TV on. buttons light up. 4 3 Press the UP ARROW Press repeatedly (about 1 POWER. press per second) until your TV turns off. 5 6 Press Press the POWER POUND. button to turn the TV on and try other buttons to make sure the code works. If you want to try another code, start over from step 1. S-2 #
Streszczenie treści zawartej na stronie nr. 6
Quick Setup/Operation Placing Your Remote in Limited Mode Limited Mode locks out all the TV mode operations except for TV power, Mute, and Volume. This feature prevents you from accidentally tuning away from satellite programming. 1 2 3 PAGE Press & hold the TV Mode button Press Press the until all Mode POUND. PAGE UP buttons light up. button. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2. If You Lose Your Picture (How to Use the Recove
Streszczenie treści zawartej na stronie nr. 7
Operation Remote Operation SAT Mode To use the features described in this section, make SAT sure you are in SAT mode by pressing the SAT Mode button. Note: Some features may not be available depending on your receiver model. Volume & Mute Buttons Control TV volume Programming required (see page S-2) Receiver Power Press this Page Buttons & TV Power button for Page up/down in Top button turns SAT Mode menus the receiver on/off Bottom button Program Guide turns the TV on/off Programming required D
Streszczenie treści zawartej na stronie nr. 8
Operation Remote Operation TV Mode To use the features described in this section, make TV sure you are in TV mode by pressing the TV Mode button. Remote programming is required. See page S-2 for instructions. Press this TV Power button for Top & bottom TV/Video TV Mode button Switch between Turn TV on/off TV inputs (available only for certain makes and models of TVs) Volume Control TV volume TV Menu Access menu features available on some TVs Up/Down Arrow Buttons Mute Channel up/down Turn TV v
Streszczenie treści zawartej na stronie nr. 9
Operation Remote Operation VCR Mode VCR To use the features described in this section, make sure you are in VCR mode by pressing the VCR Mode button. You can use this mode to operate your DVD player instead of a VCR. Remote programming is required. See page 2 for instructions. Press this button for VCR Mode VCR/DVD Power & TV Power Top button turns VCR VCR/DVD player on/off Bottom button turns the TV on/off TV/Video Up/Down Arrow Switch VCR between Buttons its TV & VCR mode Channel up/down on V
Streszczenie treści zawartej na stronie nr. 10
Streszczenie treści zawartej na stronie nr. 11
REMOTE CONTROL OVERVIEW Use this full-function remote to control your DISH Network receiver. Also, you can program the remote to control most of the popular brands of audio/video equipment like a TV, VCR, DVD player, or a second DISH Network satellite receiver. See Programming for Other Equipment on page 2. Note: This remote control may have features not used by your receiver. USING THE GUIDE This guide makes it easy to set up and use your remote control. By now you’ve noticed that the pa
Streszczenie treści zawartej na stronie nr. 12
If you program the remote to control other equipment, refer to the following pages located at the beginning of this guide for remote control operation instructions: • TVs, Remote Operation TV Mode, page S-5. • VCRs and DVD players, Remote Operation VCR Mode, page S-6. • DISH Network satellite receivers, Remote Operation SAT Mode, page S-4. • Stereo equipment use only these buttons: SELECT (change inputs), MUTE, VOLUME, and POWER. HOW THE REMOTE COMMUNICATES This remote uses IR signals to c
Streszczenie treści zawartej na stronie nr. 13
LIMITED MODE You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When Limited Mode is enabled, you cannot select TV mode. If you press the TV button while TV mode is programmed in Limited Mode, the TV button flashes and the SAT button lights, telling you cannot switch to TV mode. The remote then moves back to SAT mode. When you use the remote to control your TV in Limited Mode, you are only be able to use the POWER, MUTE, an
Streszczenie treści zawartej na stronie nr. 14
PROGRAMMING USING EQUIPMENT CODE TABLES You can set up the remote to control other equipment using the equipment codes listed on page 12 and the modes as shown on page 1. Instructions Additional Information 1 Turn the equipment on. Use the equipment’s front panel buttons or its remote control. 2 Find the brand name of the If the brand isn’t listed, see equipment in the tables Scanning for Equipment Codes starting on page 12. on page 5. 3 Press and hold the mode For example, hold the TV mode
Streszczenie treści zawartej na stronie nr. 15
Instructions Additional Information 9 Turn the equipment back For example, sometimes on and try some other POWER works when other buttons to make sure they buttons don’t. work. If the code works for other buttons, stop here. Note: If you have programmed your remote in Limited Mode, only the MUTE and VOLUME buttons work. 10 If the code doesn’t work, Try every code listed for your repeat steps 3 through 9 brand until one works for your with another equipment equipment. code from the t
Streszczenie treści zawartej na stronie nr. 16
Instructions Additional Information 4 Press POWER. This puts your remote in the scan mode. 5 Press the UP or DOWN As you press the UP or DOWN ARROW repeatedly until ARROW, the remote tries each the equipment turns off. code in the memory to see if it can turn off your equipment. When the equipment turns off, you have found a code that might work. Note: The mode button for the equipment flashes rapidly eight times when you’ve scanned all the codes for that equipment. 6 Press POUND (#).
Streszczenie treści zawartej na stronie nr. 17
SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROL When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume, even if your remote control is in SAT mode. However, if you want to use the AUX mode to control a tuner or amplifier that has a volume setting, you can set up the remote to control the tuner or amplifier’s volume instead of the TV volume while your remote control is in SAT mode. Follow the instructions in the left column to switch to controlling
Streszczenie treści zawartej na stronie nr. 18
PROGRAMMING THE REMOTE TO CONTROL A SECOND RECEIVER IN AUX MODE If you have another DISH Network satellite receiver installed, you can use this remote in AUX mode to control it along with your new receiver. When you program the remote to control the other receiver, the remote sends out IR signals to the receiver. You can program the remote to control any other DISH Network satellite receiver, except for following: • TV2 on Duo 322 (also known as DISH 322), DuoDVR™ 522, ® ® DuoDVR™ 625, Du
Streszczenie treści zawartej na stronie nr. 19
READING OUT THE REMOTE CONTROL CODES These instructions explain how to check the codes you put in the remote control when you set it up. Be sure to write them in the spaces provided on the inside of the back cover. Instructions Additional Information 1 Press and hold the mode For example, hold the TV mode button for the equipment button for a TV until all of the you want the remote to other mode buttons light. When control. When all the other you let go, the TV mode light mode buttons ligh
Streszczenie treści zawartej na stronie nr. 20
DISCRETE CODES FOR LEARNING REMOTES Remote control discrete On and Off IR commands are used by installers when programming macro commands into universal remotes. Using an On-only or Off-only command is more effective than a toggle On/Off command when trying to ensure the satellite receiver is reliably in one state or the other. To use discrete power commands, complete the following: 1 Program the DISH Network remote to desired remote address (see Changing the Remote and Receiver Address b
