Streszczenie treści zawartej na stronie nr. 1
OWNER'S
MANUAL
14-INCH COLOUR TV/VCR
TVP-342
Electrical
Safety
AS/NZ 3250
CERT 4201
Standards Australia
Please read before using this equipment
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS 3 NORMAL PLAYBACK ..................................... 14 PRECAUTIONS ................................................... 3 LOCATION .......................................................... SPECIAL PLAYBACK ..................................... 15 AVOID THE HAZARDS OF ELECTRICAL 3 RENTAL PLAYBACK ..................................... 15 SHOCK AND FIRE .............................................. 3 REPEAT PLAYBACK ...................................... 15 WARNING ..........
Streszczenie treści zawartej na stronie nr. 3
PRECAUTIONS AVOID THE HAZARDS OF LOCATION ELECTRICAL SHOCK AND FIRE For safe operation and satisfactory performance of your . Do not handle the power cord with wet hands. unit, keep the following in mind when selecting a place . Do not pull on the power cord when disconnecting it for its installation: . from an AC wall outlet. Grasp it by the plug. Shield it from direct sunlight and keep it away from . If, by accident, water is spilled on your unit, unplug sources of intense heat. . the power co
Streszczenie treści zawartej na stronie nr. 4
FEATURES The infrared remote control Playback Functions On-Screen-Programming . Picture search operation . Still picture Voltage Synthesised Tuning . Digital tracking Auto operation functions . Rental play mode . Auto repeat playback . Auto power on system when inserting a tape . Time search . Auto rewind when the end of a tape is reached (not . NTSC tape playback in the case of timer recording) Recording functions TV functions . Two different tape speed : SP/LP . CATV (Hyper Band) . OTR (One
Streszczenie treści zawartej na stronie nr. 5
VIDEO CASSETTE This TV/VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE PRECAUTIONS . Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown. Push in on the tape if it is moved from a cold place to a warm gently, but continuously, on the centre-back of the place. Before using a tape with these conditions, to cassette until it
Streszczenie treści zawartej na stronie nr. 6
OPERATING CONTROLS AND FUNCTIONS -FRONT VIEW- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - REMOTE CONTROL VIEW - 1 AUDIO input jack- Connect to audio output jack of your audio equipment or another VCR. 2 VIDEO input jack- Connect to video output jack of 25 your video camera or another VCR. 5 24 3 FUNCTION indicator- Lights up in the Standby mode. 4 REC indicator- Flashes during recording. TIMER REC indicator- Lights up in the Stand-by 15 mode fo
Streszczenie treści zawartej na stronie nr. 7
-REAR VIEW- 26 27 28 13 EARPHONE jack- Connect to earphone (not 20 COUNTER MEMORY button- Press to set counter supplied) for personal listening. The size of jack is memory on and off. (See page 16). 1/8" monaural (3.5mm). 21 TIME SEARCH button- Press to activate Time 14 Cassette compartment Search mode. 15 NUMBER buttons- Press to select desired 22 MUTE button- Press to mute sound. Press it again channels. for viewing or recording. To select to resume sound. channels 1 to 9, first press the 0 b
Streszczenie treści zawartej na stronie nr. 8
PREPARATION FOR USE CABLE CONNECTIONS INSTALLING THE BATTERIES 1) Open the battery compartment cover by pressing the VHF/UHF COMBINED ANTENNA cover on the remote unit in the direction of the arrow. The VHF/UHF Rod Antenna (not supplied) is 2) Insert 2 "R6/AA/SUM-3" penlight batteries into the detachable. Push the stem of the antenna into the hole battery compartment in the direction indicated by the which is located on the upper back cabinet of the unit. polarity (+/-) markings. Conn
Streszczenie treści zawartej na stronie nr. 9
PRESET FOR USE You can program the tuner to scan only the channels TO SKIP A PRESET CHANNEL you receive in your area. You must use the remote control for the following steps. The channels you no longer receive or seldom watch can be deleted from the memory. CHANNEL MEMORY PROGRAMMING - AUTO PRESET 1 Select "CHANNEL SET UP" -MENU- Press MENU button repeatedly TIMER PROGRAMMING 1 Plug the TV/VCR power cord to point to "CHANNEL SET PICTURE CONTROL SETTING CLOCK CHANNEL SET UP UP". Plug the TV/VCR p
Streszczenie treści zawartej na stronie nr. 10
MANUAL PRESET 1 Select "CHANNEL SET UP" -MENU- Press MENU button repeatedly TIMER PROGRAMMING to point to "CHANNEL SET PICTURE CONTROL SETTING CLOCK UP". CHANNEL SET UP USER SET UP Then, press SEL. button 2 Select "MANUAL PRESET" Press MENU button to point to -CHANNEL SET UP- "MANUAL PRESET". AUTO PRESET Press SEL. button. MANUAL SET UP 3 Enter the desired channel number Press C/P or button MANUAL SET UP repeatedly until your desired channel number is appeared. (You can also use the num
Streszczenie treści zawartej na stronie nr. 11
CLOCK SETTING In the example below, the clock is to be set to: DATE March 1st, 1996 SETTING TIME 17:40 1 Select "SETTING CLOCK" 6 Select the minute -SETTING CLOCK- -MENU- Press C/P or button Press MENU button repeatedly MONTH DAY YEAR TIMER PROGRAMMING 03 01 FRI 1996 PICTURE CONTROL repeatedly until the desired to point to "SETTING CLOCK". SETTING CLOCK HOUR MINUTE CHANNEL SET UP minute is appeared. 17 40 Then, press SEL. button. USER
Streszczenie treści zawartej na stronie nr. 12
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press SEL. button on the remote control. Each time you press SEL. button on the remote control, the TV screen will change as follows: OFF mode Counter mode Clock mode . In the Counter mode, after 5 seconds, 17:40 STOP only the counter remains. To clear it, STOP CH2 press SEL. button. . In the Clock mode, after 5 seconds, only the clock and the channel number SP COUNT 0:12:34 SP remain. To clear
Streszczenie treści zawartej na stronie nr. 13
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL The TV/VCR’s picture controls - BRIGHTNESS, 1 Turn on the TV/VCR CONTRAST, COLOUR and SHARPNESS - are Press POWER switch on the back of the TV/VCR to preset to the factory specification. This is usually best, switch to "ON". Press FUNCTION button to turn on but if you need to make any further adjustments adjust the TV/VCR. picture controls for a natural looking image. NOTES: 2 Select the channel number . Procedures must be followed within 5 sec
Streszczenie treści zawartej na stronie nr. 14
NORMAL PLAYBACK PICTURE SEARCH Make sure . . . l Power must be turned on. This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will 1 Insert a prerecorded tape be muted. If the erase-protection tab has been removed, the 1) You may view a video tape at a high speed in either TV/VCR will start playback automatically. a forward or reverse direction by pressing F.FWD or REW button. 2 To begin playback PLAY NOTE: When searching a pre-recorde
Streszczenie treści zawartej na stronie nr. 15
SPECIAL PLAYBACK . Power must be turned on. Make sure . . . . Insert a prerecorded tape. . You must use the remote control for the following . Before playback, follow steps below. steps REPEAT PLAYBACK RENTAL PLAYBACK The TV/VCR has an auto repeat function that allows This function enables you to improve the picture quality you to repeat a tape indefinitely without using the PLAY when playing back worn cassettes such as those rented button. There are two selections for Auto Repeat Playback. from
Streszczenie treści zawartej na stronie nr. 16
SEARCH Make sure . . . . You must use the remote control for the following steps. . Power must be turned on. . Insert a tape. COUNTER MEMORY TIME SEARCH This feature can be used to memorise a beginning The Time Search function makes it possible to quickly point that you want to review. And you can search it advance the tape to your desired position from any easily by rewinding or fast forwarding. position by entering the exact amount of playback time NOTE: of the part that you want to skip. . If
Streszczenie treści zawartej na stronie nr. 17
RECORDING Make sure . . . . Power must be turned on. . Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NORMAL RECORDING SKIPPING SOME MATERIALS DURING RECORDING You can only watch the same TV program that is being recorded. Press PAUSE/STILL button to PAUSE temporarily stop recording. The REC indicator blinks. 1 Select the channel to be recorded Press PAUSE/STILL or REC CH10 Press nu
Streszczenie treści zawartej na stronie nr. 18
NORMAL RECORDING COPYING A VIDEO CASSETTE (Requires another VCR) This function enables you to set a recording length simply by pressing REC/OTR button on the TV/VCR. Connect your TV/VCR and a Source (Playing) VCR using the following diagram. Make sure . . . . Power must be turned on (The front of The TV/VCR) . Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) Ex: Source (Playing) VCR N
Streszczenie treści zawartej na stronie nr. 19
TIMER AUTOMATIC TIMER 1 Select "TIMER PROGRAMMING" RECORDING Press MENU button to point to -MENU- "TIMER PROGRAMMING". TIMER PROGRAMMING PICTURE CONTROL You may set the TV/VCR to record while you are away. And press SEL. button. SETTING CLOCK CHANNEL SET UP You can set 8 programs to record on a specific day, . When you did not set the USER SET UP daily or weekly within a 1 year period. clock, "SETTING CLOCK" appears. If so, follow page 11 In the example below, the timer is being set to record: t
Streszczenie treści zawartej na stronie nr. 20
4. Set start hour 10 Exit the program mode Press C/P or button PROGRAM NUMBER 4 Press SEL. button. Program 4 is now completed. DATE 05/06 MON repeatedly until your desired hour START TIME 10:30 To set another program, repeat steps [1] to [10] END TIME -- -- is appeared. (Example: "19" for CHANNEL - - TAPE SPEED - - 19:30) And press SEL. button 11 Set the timer Press FUNCTION button to set automatic timer recording. The REC indicator lights up. 5.
