Instrukcja obsługi Sanus Systems VM200

Streszczenie treści zawartej na stronie nr. 1

Assembly Instructions for Model: VM200
Thank you for choosing a Sanus Systems VisionMount™ wall mount. The VM200 is designed to mount up to 40″ LCD TVs weighing less
than 80 lbs [36.3 Kg] to a vertical wall. It will allow you to effortlessly tilt the TV ±20°
CAUTION: The size and weight of your television must not exceed 40” [1016 mm] diagonally and 80 Lbs [36.3 Kg]. The wall must
be capable of suporting five times the weight of the televison plus the wall mount. Never use defective parts.

Streszczenie treści zawartej na stronie nr. 2

Step 1: Mount Monitor Brackets to a television with a flat back NOTE: For televisions with a curved back, or an obstruction near the threaded insert see Step 2. Determine the diameter of the Bolt (G,H,I) your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance stop immediately. Once you have determined the correct diameter, see the appropriate Diagram below, thread the Bolt through the appropriate Lock Washer (M,N,O), correspondin

Streszczenie treści zawartej na stronie nr. 3

Step 2: Mount Monitor Brackets to a television with a curved back or an obstruction near the threaded insert Determine the diameter of the Bolt (J,K,L) your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance stop immediately. Once you have determined the correct diameter, see the appropriate Diagram below, thread the Bolt through the appropriate Lock Washer (M,N,O), the corresponding Washer (P,Q), the Monitor Bracket (B,C), a Spac

Streszczenie treści zawartej na stronie nr. 4

Step 3: Mounting the Wall Plate - wood stud, brick, solid concrete and concrete block mounting options are provided Wood Stud Installation: CAUTION: Do not over tighten the Lag Bolts. Tighten Lag Bolts (D) only until the Lag Bolt Washer (E) is pulled firmly against the Wall Plate (A). If there is a layer of drywall or other material, this drywall or other material may not exceed 5/8 inch [15.8 mm] in thickness. Failure to heed this caution may result property damage and/or personal injury .