Instrukcja obsługi JL Audio Stealthbox SB-F-TRKCTR/10W3

Streszczenie treści zawartej na stronie nr. 1

SB-F-TRKCTR/10W3 Stealthbox™
Fits Full-Size Ford Pickup Trucks Equipped
with a Center Console
Installation Guide:
This Stealthbox is a product which requires professional installation skills and tools. Please read this
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properl

Streszczenie treści zawartej na stronie nr. 2

STEP 3: Remove the console from the vehicle. STEP 4: Cut the carpet between each set of mounting studs in the vehicle. The Stealthbox should sit directly on the metal floor of the vehicle. STEP 5: Remove the six screws holding the outer shell of the console to the storage unit. There are two screws in the cup holder and two in each side near the bottom of the unit. Remove the outer shell. STEP 6: Place the outer shell over the Stealthbox. Bolt the shell to the Stealthbox using the six factory

Streszczenie treści zawartej na stronie nr. 3

STEP 7: Run speaker wire to the mounting location of the Stealthbox. Trim to length and attach to the Stealthbox. STEP 8: Test the operation of the enclosure. STEP 9: Place the Stealthbox in the vehicle. The brackets on the bottom of the Stealthbox should fit over the studs in the floor of the vehicle. STEP 10: Using the nuts removed in Step 2, bolt the Stealthbox into place. This step will require an open end wrench. Tighten securely. This completes the installation. Specifications: Enclosur