Instrukcja obsługi JL Audio Stealthbox SB-F-EXPED2/10W3v3

Streszczenie treści zawartej na stronie nr. 1

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7
INSTALLATION

DIFFICULT Y:
If you choose to perform the installation yourself, it is absolutely vital that
®
OUT
the Stealthbox be properly mounted to the vehicle according to these
OF
instructions. Failure to mount the enclosure properly presents two problems:
INSTALL ATION GUIDE
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the forc

Streszczenie treści zawartej na stronie nr. 2

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7 STEP 4 STEP 8 With an 8mm socket, remove the bolts that secure the With a T-50 torx socket, remove the bolt that secures the plastic storage bins to the floor. driver’s side third row seat belt to the floor. Remove the plastic storage bins from SUV. STEP 5 STEP 9 With an 8mm socket, remove the pair of bolts that secure With a T-50 torx socket, remove the bolt that secures the the lift tray t

Streszczenie treści zawartej na stronie nr. 3

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7 STEP 1 2 STEP 16 Pop out the circle cover that is located in the upper portion With an 8mm socket, remove the bolt that secures the side of the c-pillar plastic cover. panel metal bracket to the floor. With an 8mm socket, remove the bolt. STEP 1 3 STEP 17 Remove the upper c-pillar plastic cover. Pull the rear portion of the side panel from location. Feed the third row seat belt through the

Streszczenie treści zawartej na stronie nr. 4

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7 STEP 2 0 STEP 24 Remove the plug from the factory amplifier. Use the last bolt assembly to secure the supplied Z-bracket onto the bottom front of the Stealthbox®, as pictured. STEP 2 1 STEP 25 With 10mm socket, remove the two nuts and one bolt that Place the Stealthbox® into the mounting area. Guide the two secure the plastic woofer enclosure to the SUV. factory studs through the two holes

Streszczenie treści zawartej na stronie nr. 5

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7 STEP 2 8 STEP 32 From the back side of the removed side panel. Grind off the Remove the screws from the grille assembly. Place a supplied plastic weld that holds the factory woofer grilles onto the #8 washer onto each screw. side panel. Remove the grille from the panel. To secure the grille onto the front side of the side panel. The From the front side of the removed side panel. Place the sc

Streszczenie treści zawartej na stronie nr. 6

S SB B-F -F- -EX EXP PE ED D2 2/ /1 10 0W W3 3v v3 3_ _IIN NS ST TR R_ _S SK KU U# #0 01 11 12 23 37 7 STEP 3 6 INC L UDED H A RD W A RE Secure the third row seat belt to the ceiling and floor, from STEPS 8 & 9. ( (3 3) ) 3 3/ /8 8- -iin nch - ch -1 16 x 1 6 x 1- -in inch H ch He ex T x Ta ap B p Bo ollt t ( (4 4) ) 3/8 3/8- -iin nc ch h Fl Fla at t Wa Was sh he er r ( (1 1) ) L- L-b br ra ac ck ke et t ( (4 4) ) # #8 8 S SA AE E F Flla at t W Wa as sh he er r Snap in the seat belt t