Instrukcja obsługi JL Audio Stealthbox SB-B-3SER/CPE/SDN(E9092)

Streszczenie treści zawartej na stronie nr. 1

SB-B-3SER/CPE/SDN INSTR_SKU# 011256
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
15
caused by the force exerted by the woofer(s).
SB-B-3SE

Streszczenie treści zawartej na stronie nr. 2

SB-B-3SER/CPE/SDN INSTR_SKU# 011256 I n C l u d e d H a R d W a R e s t e P 4 (2) 8mm- 1.25 x 35mm Black Oxide Hex Head Bolt Using the hardware assembled in ste P 3, install two mount (2) 8mm- 1.25 x 22mm Chrome Hex Head Bolt brackets where bolts were removed in ste P 2. Do not (4) 8mm Flat Washer tighten the bolts down yet, just get them snug. The slotted (4) 8mm Split Lock Washer end of the bracket should point down and towards the rear of the car. (2) Custom Mount Brackets Towards bac