Instrukcja obsługi JL Audio SB-VW-JETSW/10W3v3

Streszczenie treści zawartej na stronie nr. 1

SB-VW-JETSW/10W3v3 INSTR_SKU# 94482
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the force exerted by the woofer(s).
SB-VW-JET

Streszczenie treści zawartej na stronie nr. 2

SB-VW-JETSW/10W3v3 INSTR_SKU# 94482 s t e P 4 S T E P 8 Using a 1/2” drill bit, drill through the three marks in the Wax Take the three wax squares and put them on the floor where Squares. the spare had been in the approximate locations as shown. Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, tires, transmission lines, electrical wiring, exhaust systems or anything else that might cause a reduction in your weekly pay. a lways wea

Streszczenie treści zawartej na stronie nr. 3

SB-VW-JETSW/10W3v3 INSTR_SKU# 94482 I n C l u d e d H a R d W a R e 3) 3/8” Split Lock Washer 3) 3/8 x 1-1/4” Fender Washer 1) 1/2” x 1”OD Spacer 2) 1” x 1”OD Spacer 3) 3/8-16 x 2-1/4” Set Screw 3) 3/8-16 Hex Nut s P e C I F I C a t I o n s Enclosure Type: Acoustic Suspension (sealed) Driver Type: 10W3v3-4 Nominal Impedance: 4 Ohms Continuous Power Handling: 500Watts P o W e R R e C o m m e n d a t I o n JL Audio recommends high quality amplifiers such as the JL Audio HD900/5, 500/1v2 o