Instrukcja obsługi Fortinet KS13

Streszczenie treści zawartej na stronie nr. 1

KS
KSTWEETERS
KS25, KS20, KS13
©2007 Stillwater Designs

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION KSTweeters TweeterMounting Owner’sManual The tweeter can be mounted one of three ways: flush, surface, and angled mounting. For flush mounting applications, please refer to the illustration in Figure 2. Choose a flat location Models: KS25 / KS20 / KS13 on the panel with space behind the panel to allow room for the mounting nut and motor structure. After checking the clearances, cut the recommended diameter mounting hole in the panel. Position the shorter mounting nut behind the pane

Streszczenie treści zawartej na stronie nr. 3

PERFORMANCE WiringAdditionalTweeters Tweeter Figure 4 Front Modern high performance tweeters have a lower DC Resistance than what used to be Angle Ring available. The Kicker KS-Series tweeters are rated at four ohms and work with any source unit or amplifier designed to operate at a four ohm load. If you want to add additional KS- Longer Mounting Nut Series tweeters to your existing component, coaxial, or tweeter system, on each channel of your source unit or amplifier wire the tweeter crossover

Streszczenie treści zawartej na stronie nr. 4

GARANTIE AcousticsLimitedWarranty InternationalWarranty Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer policies. it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you