Instrukcja obsługi Shindaiwa AHS242es

Instrukcja obsługi dla urządzenia Shindaiwa AHS242es

Urządzenie: Shindaiwa AHS242es
Kategoria: Przycinarka
Producent: Shindaiwa
Rozmiar: 2.54 MB
Data dodania: 3/30/2014
Liczba stron: 28
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Shindaiwa AHS242es. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Shindaiwa AHS242es.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Shindaiwa AHS242es bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Shindaiwa AHS242es na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Shindaiwa AHS242es na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Shindaiwa AHS242es Instrukcja obsługi - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Shindaiwa AHS242es a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Shindaiwa AHS242es. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1

SHINDAIWA OWNER’S/OPERATOR'S MANUAL
AHS242 ARTICULATED
HEDGE TRIMMER
WARNING!
Always wear eye and ear
protection when operating
this machine! To minimize the risk of
injury to yourself and others, read this
manual and familiarize yourself with
its contents.
X7502801200
06/10

Streszczenie treści zawartej na stronie nr. 2

Introduction The Shindaiwa AHS242 Articulated IMPORTANT! WARNING! Hedge Trimmer is designed and built The information contained in these The engine exhaust from this to deliver superior performance and instructions describes machines avail- product contains chemicals known to reliability without compromise to qual- able at the time of publication. ity, comfort, safety or durability. the State of California to cause can- cer, birth defects or other reproduc- Echo Inc. reserves the right to

Streszczenie treści zawartej na stronie nr. 3

Safety and Operational Labels An articulated hedge trimmer The blades / cutting attach- Wear non-slip heavy-duty has the potential to cause ments are SHARP! Handle gloves. serious personal injury to the with care. operator or bystanders if mis- used, abused or mishandled. You must observe all special Safety tip shoes or boots safety instructions to reduce with non-slip sole should be Be aware of the danger of the risk of personal injury. worn. falling debris. Read and follow this manu

Streszczenie treści zawartej na stronie nr. 4

Operating Precautions WARNING! ■ Never transport the articulated ■ Immediately stop the engine with hedge trimmer or leave it unat- ■ Make sure there is always good the stop switch if the machine sud- tended with the engine running. ventilation when operating the artic- denly begins to vibrate or shake. An engine that’s running could be ulated hedge trimmer. Fumes from ■ Always stop the engine imme- accidently accelerated causing the engine exhaust can cause seri- diately and check for da

Streszczenie treści zawartej na stronie nr. 5

Safety (continued) WARNING! Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with a spark arrestor and a spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. CAUTION! ■ Do not make unauthorized modi- ■ Always stop the engine and allow fications to the articulated hedge it to cool before refueling. Avoid ■ Always maintain the articu- t

Streszczenie treści zawartej na stronie nr. 6

Operator Safety Always wear a hard hat This machine is designed ALWAYS clear your work area to reduce the risk of head for trimming hedges. Do of trash or hidden debris that injuries during operation of not use this machine for could be thrown back at you or this machine. other purposes. toward a bystander. Always wear eye and hearing protection. ALWAYS protect Shindaiwa recommends wearing a yourself from hazards face shield as additional face and eye such as thorny brush protecti

Streszczenie treści zawartej na stronie nr. 7

Specifica tions Model AHS242 Engine type 2-cycle, air cooled, vertical cylinder Dimensions (L x W x H) 1682 mm (66.2 in) x 248 mm (9.76 in) x 245 mm (9.6 in) Weight 5.99 Kg (13.2 lb) Bore x stroke 33 x 28 mm/1.3 x 1.1 in. 3 Displacement 23.9 cm /1.46 cu. in. Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil Carburetor type Diaphragm-type Fuel tank capacity 690 ml/ 23.3 oz. Ignition One-piece electronic, C.D.I. Spark plug NGK BPMR8Y Electrode Gap 0.6 mm/ .024 in. Torque 150-170 kg

Streszczenie treści zawartej na stronie nr. 8

Assembly Prior To Assembly IMPORTANT! Before assembling, make sure you ■ Kit with this manual and tool kit for have all the components required for a The terms “left”, “left-hand”, and “LH”; routine maintenance. complete unit: “right”, “right-hand”, and “RH”; “front” Carefully inspect all components for and “rear” refer to directions as viewed ■ Unit assembly damage. by the operator during normal opera- ■ Cutter blade cover tion. Handle Throttle Assembly Socket-head This unit comes wi

Streszczenie treści zawartej na stronie nr. 9

Assembly (continued) Travel limiter and adjustment range NOTE: 225° This articulated hedge trimmer is Travel Limiter 135° equipped with a travel limiter that pre- vents the cutter assembly from rotating outside of the 90°- 225° range. The cutter assembly can be adjusted to 10 different positions ranging from 90° 90° to 225° from the outer tube as shown. Always make sure the latch lock is securely locked after each adjustment. The travel limiter prevents the cutter assembly from rotati

Streszczenie treści zawartej na stronie nr. 10

Mixing Fuel WARNING! Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engi

Streszczenie treści zawartej na stronie nr. 11

Mixing Instructions After use 1. Fill an approved fuel container with half of the • DO NOT store a unit with fuel in its tank. Leaks can required amount of gasoline. occur. Return unused fuel to an approved fuel stor- 2. Add the proper amount of engine oil to gasoline. age container. 3. Close container and shake to mix oil with gaso- line. Storage - Fuel storage laws vary by locality. Contact 4. Add remaining gasoline, close fuel container, and your local government for the laws affect

Streszczenie treści zawartej na stronie nr. 12

Starting the Engine (continued) 1. Slide the ignition switch to the “ON” position. 2. Press the primer bulb until fuel can ON be seen flowing in the transparent Primer Bulb return tube. IMPORTANT! The primer system only pushes fuel through the carburetor. Repeatedly pressing the primer bulb will not flood the engine with fuel. Press the primer bulb Slide the ignition switch to the “ON” position 3. Set the choke lever to the CLOSED position if engine is cold. 4. While holding the outer t

Streszczenie treści zawartej na stronie nr. 13

Starting the Engine (continued) When the Engine Starts... ■ After the engine starts, allow the ■ Advancing the throttle makes the If the engine does not start engine to warm up at idle 2 or 3 cutting attachment move faster; ■ Repeat the appropriate starting pro- minutes before operating the unit. releasing the throttle permits the cedure for a cold or warm engine. attachment to stop moving. If the ■ If the engine does not continue to ■ If the engine still fails to start, cutting attachmen

Streszczenie treści zawartej na stronie nr. 14

Safe Operation Before trimming: This machine is designed especially for trimming hedges. ■ Wear suitable protective clothing ■ Rest when you feel fatigued. Never use this machine for any other and equipment. See the “Safety” ■ Never stand directly underneath the purposes. Never try to cut stones, met- section for information. branch you are cutting. Be aware of als, plastics or any other hard objects. ■ Choose the best working position falling branches. Note that a branch Using this Art

Streszczenie treści zawartej na stronie nr. 15

Maintenance (continued) Muffler Spark Plug This unit must never be operated with a faulty or missing Keep the spark plug and wire connections tight and clean. spark arrester or muffler. Make sure the muffler is well Fasteners secured and in good condition. A worn or damaged muffler is a fire hazard and may also cause hearing loss. Make sure nuts, bolts, and screws (except carburetor adjusting screws) are tight. Cutter blade adjustment 3. Working from the gearcase end, lock WARNING! Locknut

Streszczenie treści zawartej na stronie nr. 16

Maintenance (continued) 10-Hour maintenance (more frequently in dusty conditions) Unscrew 1. Remove the air cleaner cover by Fasteners loosening the cover screw(s) and lifting. Air Filter 2. Remove the air cleaner element. Element ■ In dusty applications the filter should be gently blown out with compressed air daily or 2 to 3 times per week. IMPORTANT! Direct the air stream at the inside face of the filter only! ■ Once each week the filter should Loosen air cleaner cover screws be cl

Streszczenie treści zawartej na stronie nr. 17

Maintenance (continued) 50-hour maintenance Every 50 hours of operation; more frequnetly in dusty conditions: Hooked wire ■ Remove and clean the cylinder cover and clean dirt and debris from the cylinder cooling fins. Remove and replace the fuel filter element. ■ Use a hooked wire to extract the fuel filter from inside the fuel tank. Inspect the fuel filter element. If it shows signs of contamination, replace with a genuine Shindaiwa replacement fuel filter element. Fuel filter element

Streszczenie treści zawartej na stronie nr. 18

Maintenance (continued) 135 Hour Maintenance Engine Cover Engine Cover Screws Muffler Cover Muffler Cover Screw Muffler screws Muffler Screws Gasket Outlet Muffler Spark arrester Spark arrester gasket screen cover Muffler and spark arrester maintenance If the engine becomes sluggish and 5. With a 4 mm hex wrench remove the 1. Remove the spark plug boot. low on power, check and clean the three muffler bolts and the muffler. 2. With a 3 mm hex wrench remove the spark arrester screen. 6.

Streszczenie treści zawartej na stronie nr. 19

Carburetor Adjustment Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required. High Altitude Operation This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintai

Streszczenie treści zawartej na stronie nr. 20

Troubleshooting Guide ENGINE DOES NOT START OR HARD TO START Remedy Possible Cause What To Check Let cool completely and restart. Engine hot/heat soaked. Vaporlock. Refi ll with fresh, clean unleaded gasoline with a pump octane Low fuel quality. Refi ll with fresh, clean unleaded gasoline with a pump octane of 89 or higher of 89 or higher mixed with an air cooled engine oil that mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/ meets or exceeds ISO-L-EGD and/or JASO FD cl


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Shindaiwa 63848-94010 Instrukcja obsługi Przycinarka 14
2 Shindaiwa 80844 Instrukcja obsługi Przycinarka 8
3 Shindaiwa 80974 Instrukcja obsługi Przycinarka 3
4 Shindaiwa 68800-94313 Instrukcja obsługi Przycinarka 2
5 Shindaiwa 80775 Instrukcja obsługi Przycinarka 0
6 Shindaiwa 81601 Instrukcja obsługi Przycinarka 1
7 Shindaiwa 81606 Instrukcja obsługi Przycinarka 0
8 Shindaiwa 81372 Instrukcja obsługi Przycinarka 0
9 Shindaiwa 81010 Instrukcja obsługi Przycinarka 0
10 Shindaiwa 81605 Instrukcja obsługi Przycinarka 0
11 Shindaiwa 81646 Instrukcja obsługi Przycinarka 0
12 Shindaiwa 81643 Instrukcja obsługi Przycinarka 0
13 Shindaiwa 81642 Instrukcja obsługi Przycinarka 0
14 Shindaiwa 82014 Instrukcja obsługi Przycinarka 0
15 Shindaiwa 89309 Instrukcja obsługi Przycinarka 0
16 Sony PCS-G70P Instrukcja obsługi Przycinarka 12
17 Sony PCS-G70 Instrukcja obsługi Przycinarka 12
18 ABC Office 440 Instrukcja obsługi Przycinarka 2
19 Sony 370A Instrukcja obsługi Przycinarka 83
20 ABC Office 448 Instrukcja obsługi Przycinarka 2