Streszczenie treści zawartej na stronie nr. 1
Shaft Hedge Clipper Attachment
Operator's Manual
MODEL 99944200485
MODELS USED ON: SRM-2100SB/2400SB
SRM-210SB/211SB
SRM-260SB/261SB
PAS 2100/2400
PAS 210/211
PAS 230/231
PAS 260/261
PAS-2601
PAS-265
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Opera-
tor's Manual and a Safety Manual for Pro Attachment Series power source or Split
Boom Trimmer. Those manuals and this manual must be read and understood for
proper a
Streszczenie treści zawartej na stronie nr. 2
2 Itcntrodu Ion Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the- job-dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operating tips and SAFETY messages. the rot oerap 's uamnla Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation
Streszczenie treści zawartej na stronie nr. 3
Shaft h edeg Clipper a a tt Chment 3 O t pera Or 'S m anual s yfeta manual safety symbols nda I ant mport I t nforma Ion Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre- ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. CIRCLE AND SLASh SyMBOL DANGER This symbol means the specific action The safety alert symbol accompanied by the word shown is proh
Streszczenie treści zawartej na stronie nr. 4
4 lanosrep cdno It Ion nda fsytea equ Ipment WARNING Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. Physical Condition Hearing Protection Your judgment and physical dexterity may not be good: ECHO recommends wearing hearing protection whenever • if you are tired or sick, unit is used. • if you
Streszczenie treści zawartej na stronie nr. 5
Shaft h eegd Clipper a a tt Chment 5 O t pera Or 'S m anual Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vit
Streszczenie treści zawartej na stronie nr. 6
6 equ Ipment WARNING Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product. Before operation a complete check of the unit must be performed; • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Never adjust blades when the engine is operating. • Check that the blade assembly is firmly attached and in safe operating co
Streszczenie treści zawartej na stronie nr. 7
Shaft h eegd Clirpep a a tt Chment 7 O t erap Or 'S m anula d escr Ipt Ion Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 3 2 1 4 6 5 P/N X505002670 1. BLADES - Double reciprocating blades mounted to a blade support bar. Double-sided blade is capable of cutting on either side
Streszczenie treści zawartej na stronie nr. 8
8 c ontents The ECHO product you have purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. _____ 1 - Shaft Hedge Clipper Attachment _____ 1 - Operators Manual _____ 1 - Safety Manual _____ 1 - Warranty Card _____ 1 - Blade Cover _____ 1 - Storage Hook Assembly a y sembls power ehda shaft /lrweo stafh y assembl T
Streszczenie treści zawartej na stronie nr. 9
Shaft h eegd Clipper a a tt Chmetn 9 O t pera Or 'S m anual front olpo handle al remov Tools Required: Screwdriver. Parts Required: None NOTE Front loop handles/loop handles with barrier bars are not recom- mended for use with Hedge Clipper attachment. 1. Remove front handle assembly, barrier bar (if installed), and mounting hardware from PAS or SRM-SB power head. 2. Retain parts for future use. o t pera Ion WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands,
Streszczenie treści zawartej na stronie nr. 10
10 m a Iecnanent WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. Your ECHO product is designed to provide many hours of trouble f
Streszczenie treści zawartej na stronie nr. 11
Shaft h eegd Clipper a a tt Chmtne 11 O t pear Or 'S m anual WARNING Blades are very sharp. Wear gloves to protect hands, otherwise serious personal injury may result. 1. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 2. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 3. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated. 4. Wipe excess oil from the blade befo
Streszczenie treści zawartej na stronie nr. 12
12 C WARNING Blades are very sharp. Wear gloves to protect hands, otherwise serious personal injury may result. B 1. Remove gear housing locating screw (A) and loosen clamping A screw (B). Remove the gear housing assembly from the drive shaft housing. C 2. Pull the drive shaft (C) from the housing, wipe clean and re-coat with a thin coating [1/2 oz. (15 ml)] of grease. 3. Slide the flexible shaft back in the drive housing being careful not to get dirt on the flex shaft. 4. Slide Gear H
Streszczenie treści zawartej na stronie nr. 13
Shaft h eegd Clipper a a tt Chmtne 13 O t pera Or 'S m anual 1. Move stop switch to stop position. 2. Disconnect spark plug wire. B 3. Slide blades to allow file clearance using slots (B) on bottom of blade. Do not pry against cutting edges. 4. File each edge carefully. Follow the original shape of the blade. 45º IMPORTANT If a power grinder is used DO NOT allow blade to over heat. 6mm (.25 in.) Radius 5. Lubricate blades (see “Lubrication instructions”). IMPORTANT Blades should only be rem
Streszczenie treści zawartej na stronie nr. 14
14 s oraget IMPORTANT Always install blade cover when transporting or storing unit. 1. Clean and lubricate cutting blades and gear case. 2. Sharpen cutting blades as required. 3. Apply a light coating of clean 20W engine oil along entire length of blades and on blade bolts. 4. Install blade cover onto hedge clipper cutting blades. 5. Store hedge clipper attachment in a dry, dust free place out of the reach of children, using supplied storage hook. Storage Hook Installation 1. Insert small en
Streszczenie treści zawartej na stronie nr. 15
Shaft h eegd Clrppei a a tt Chtenm 15 O t pera Or 'S m nuala enots
Streszczenie treści zawartej na stronie nr. 16
s v er Ic Ing I t anfomr Ion srta p /ser Ial bmrenu Genuine ECHO Parts and ECHO REPOWER™ Parts and Assem- blies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. _________________SN. ___________________ DEALER? v rse I
