Instrukcja obsługi Raritan Computer DOMINION KX II-101

Streszczenie treści zawartej na stronie nr. 1

Dominion® KX II-101
Quick Setup Guide
Thank you for your purchase of the KX II-101, the industry's most full-featured, enterprise-class, secure, digital KVM
(Keyboard, Video, Mouse) switch.
This Quick Setup Guide explains how to install and configure the KX II-101. For additional information on any aspect of the KX II-101,
see the accompanying KX II-101 User Guide, which can be downloaded from the Firmware and Documentation section
(http://www.raritan.com/support/firmware-and-documentat

Streszczenie treści zawartej na stronie nr. 2

5. Restart the computer. Windows XP®/Windows 2003® Settings Note: In many Linux graphical environments, the command To configure the mouse: Ctrl+Alt+ + (plus sign) changes the video resolution, scrolling 1. Select Start > Control Panel > Mouse. through all available resolutions that remain enabled in the XF86Config file. 2. On the Pointer Options tab in the Motion group, set the mouse motion speed setting to exactly the middle speed and deselect the Enhanced pointer precision chec

Streszczenie treści zawartej na stronie nr. 3

• For standard AC power, plug the included AC power adaptor kit into the Power port and plug the other end into Diagram key a nearby AC power outlet. Local monitor, • For PoE, attach a 10/100Mbps cable to the LAN port and keyboard, and plug the other end into a PoE-provisioned LAN. mouse. After the KX II-101 is powered ON, it goes through a boot-up Note: 1, 2 and 3 are required if local access to the target is sequence, during which the blue Raritan-logo LED will blink required

Streszczenie treści zawartej na stronie nr. 4

2. Use the PS/2 cabling to attach the local keyboard, video, PS/2 Configuration and mouse to the Local User port of the KX II-101. Note: The KX II-101 must be powered for the Local User port to function. 3. If you require Virtual Media (VM) connectivity, connect the mini-USB connector to the KX II-101 and the USB connector to any USB port on the target server. Network Connect a standard Ethernet cable from the network port labeled LAN to an Ethernet switch, hub, or router. The LAN

Streszczenie treści zawartej na stronie nr. 5

Step 4: Configure the KX II-101 With this option, network parameters are assigned by the DHCP server. If DHCP is used, enter the Preferred Change the Default Password host name (DHCP only). Up to 80 characters. 4. Select Obtain DNS Server Address Automatically if DHCP When you first log into the Remote Console, you are prompted to set a new password to replace the default. Then is selected and Obtain DNS Server Address is enabled. you can configure the KX II-101. When Obtain DNS Server

Streszczenie treści zawartej na stronie nr. 6

5. Choose the group from the User Group drop-down list. The list contains all groups you have created in addition to the system-supplied default groups. , which is the default setting, Admin, Individual Group. If you do not want to associate this user with an existing User Group, select Individual Group from the drop-down list. For more information about permissions for an Individual Group. 6. To activate the new user, select the Active checkbox. The default is activated (en