Instrukcja obsługi Eureka! Tents Timberline Outfitter

Streszczenie treści zawartej na stronie nr. 1

• Connect the snaps on the underside of the fly to the rings on side of
IMPORTANT:
the tent. See fig.5.
Do not attempt this assembly with the spanner joined.
• Connect four shock-corded S-hooks, located at fly corners, to the
ring and pin assemblies at base of each pole.
• Disconnect the rods in the middle of the spanner. Place one end of
• Stake down the two pull outs on the sides of the Fly.
the spanner through the center hole of the first junction tube. Place
See fig.6.
the o

Streszczenie treści zawartej na stronie nr. 2

• If your tent does not have loops or rings for guy outs, attach guy lines 1/3 to GENERAL TENT CARE: What Johnson Outdoors Gear LLC Will Do: If after inspection we find that a WARNING: 1/2 of the way up the framework on the main sidewalls. This enables the • Sweep the tent floor daily to prevent damage from stones. product failed due to a manufacturing or material defect, we will repair or KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. guy line to support the lower section of the p