Streszczenie treści zawartej na stronie nr. 1
ENGLISH
MODEL
CD-DH899N
MINI COMPONENT SYSTEM
OPERATION MANUAL
CD-DH899N Mini Component System consisting of CD-DH899N (main unit) and CP-DH899N (speaker system).
®
ENERGY STAR Program Information
Products that have earned
®
the ENERGY STAR are
designed to protect the
environment through
superior energy efficiency.
®
ENERGY STAR is a U.S. registered mark.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Accessories
Please confirm that only the following accessories
Streszczenie treści zawartej na stronie nr. 2
For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. Th
Streszczenie treści zawartej na stronie nr. 3
System connections (continued) Make sure to unplug the AC power cord before making any connections. TV AM loop antenna Installing the AM loop To video antenna input jack < Assembling > Video cable (not supplied) < Attaching to the wall > wall screws (not supplied) Left speaker FM antenna Right speaker Red Black AC outlet (AC 120 V ~ 60 Hz) Remote control Caution: Battery installation ● Replace all old batteries with new ones at the same time. Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 o
Streszczenie treści zawartej na stronie nr. 4
General control Bass control MINI COMPONENT SYSTEM CD-DH899 1 Press the BASS/TREBLE button to select “BASS”. 2 Within 5 seconds, press the VOLUME (+ or –) button to POWER POWER FUNCTION ON/STAND-BY adjust the bass. ON/STAND-BY VOL Treble control 1 Press the BASS/TREBLE button to select “TREBLE”. 2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the treble. Equalizer CD USB When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different
Streszczenie treści zawartej na stronie nr. 5
Listening to the iPod Supported iPod models: ● iPod nano (software 1.2 above) ● iPod mini (software 1.2 above) MINI COMPONENT SYSTEM CD-DH899 th ● iPod (5 generation) (software 1.3 above) (Dock connector equipped Click Wheel model) POWER FUNCTION th POWER ON/STAND-BY ON/STAND-BY ● iPod (4 generation) (software 3.0.2 above) (Dock connector equipped Click Wheel model) VOL nd ● iPod nano (2 generation) (software 1.0.0 above) rd ● iPod nano (3 generation) (software 1.0.3 above) th ● iPod nano (4 gen
Streszczenie treści zawartej na stronie nr. 6
Listening to the iPod (continued) Listening to a CD or MP3/WMA disc Watching videos on a TV connected to iPod MINI COMPONENT SYSTEM CD-DH899 1 Press the DISPLAY (TV OUT) button for more than 2 seconds. POWER POWER FUNCTION “TV DISP” will appear on display. ON/STAND-BY ON/STAND-BY 2 Press the ENTER button to start playback. VOL Notes: ● If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed. ● To return to watchin
Streszczenie treści zawartej na stronie nr. 7
Listening to a CD or MP3/WMA disc (continued) Direct track search Random play By using the Direct Search buttons, the desired tracks on The tracks on the disc can be played in random order the current disc can be played. automatically. Use the Direct Search buttons on the remote control to To random play all tracks: select the desired track while playing the selected Press and hold down PLAY MODE button on the remote disc. control until “RANDOM” appears. Press the / (CD / ) ● The Direct Search b
Streszczenie treści zawartej na stronie nr. 8
Listening to a CD or MP3/WMA disc (continued) Programmed play (MP3/WMA) Procedure to playback MP3/WMA disc with folder mode on 1 While in the stop mode, press the MEMORY button to To play back CD-R/RW. enter the programing save mode. 1 Press the CD button, and load an MP3/WMA disc. After disc is loaded, disc info will be displayed. MP3 indicator 2 Press the TUNING ( or ) button on the remote WMA indicator control to select the desired folder. Disc Name TOTAL indicator Total number of Total numb
Streszczenie treści zawartej na stronie nr. 9
Listening to USB mass storage device/MP3 player 3 Select desired file to be played back by pressing the or FUNCTION POWER ON/STAND-BY button. VOL 4 Press the / (USB / ) button. Playback will start and the file name will be displayed. PUSH OPEN ● Title, Artist and Album name are displayed if they are recorded AUDIO IN PHONES in the USB memory device. ● Display content can be changed by pressing the DISPLAY button. To remove USB memory device 1 Press the (USB ) button to stop playback. 2 Discon
Streszczenie treści zawartej na stronie nr. 10
Listening to the radio Memorising a station You can store 40 AM and FM stations in memory and recall MINI COMPONENT SYSTEM CD-DH899 them at the push of a button. (Preset tuning) POWER POWER FUNCTION ON/STAND-BY 1 Perform steps 1 - 3 in “Tuning”. ON/STAND-BY VOL 2 Press the MEMORY button. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. CD USB 4 Within 30 seconds, press the MEMORY butto
Streszczenie treści zawartej na stronie nr. 11
Listening to a cassette tape Note: Tape playback Tape recording function is not available in this unit. Before playback: 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button on main unit repeatedly ● For playback, use normal or low-noise or TAPE button on remote control to select TAPE tapes for the best sound. (Metal or function. CrO tapes are not recommended.) 2 3 Open the cassette door ● Do not use C-120 tapes or poor-quality by pushing the area tapes, as they ma
Streszczenie treści zawartej na stronie nr. 12
Setting the clock (Remote control Timer and sleep operation (Remote only) control only) Once timer: Once timer play works for one time only at a preset time. Daily timer: Daily timer play works at the same preset time every day. For example, set the timer as a wake-up call every morning. CD Using the once timer and daily timer in combination: USB For example, use the once timer to listen a radio program, and use the daily timer to wake up. 1 minute or more Daily timer Once timer TAPE Stop Start
Streszczenie treści zawartej na stronie nr. 13
Timer and sleep operation (Remote control only) (continued) Reusing the memorized timer setting: The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations. MINI COMPONENT SYSTEM CD-DH899 1 Turn the power on and press and hold down the CLOCK/TIMER button. POWER FUNCTION ON/STAND-BY 2 Within 10 seconds, press the or button to VOL select “ONCE SET” or “DAILY SET”, and press the MEMORY button. PUSH OPEN 3 Within 10 seconds, press the or b
Streszczenie treści zawartej na stronie nr. 14
Enhancing your system Troubleshooting chart The connection cord is not included. Purchase a Many potential problems can be resolved by the owner commercially available cord as shown below. without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. Portable audio player, etc. General Audio cable Symptom Possible cause (not supplied) ● The clock is not set ● Did a power failure occur? to the corr
Streszczenie treści zawartej na stronie nr. 15
Troubleshooting chart (continued) Cassette deck If problem occurs When this product is subjected to strong external interference Symptom Possible cause (mechanical shock, excessive static electricity, abnormal supply voltage ● Sound skipping. ● Is there any slack? due to lightning, etc.) or if it is operated incorrectly, it may malfunction. ● Cannot hear treble. ● Is the tape stretched? ● Sound Fluctuation. ● Are the capstans, pinch rollers or If such a problem occurs, do the following: heads d
Streszczenie treści zawartej na stronie nr. 16
Specifications As part of our policy of continuous improvement, SHARP USB reserves the right to make design and specification changes for product improvement without prior notice. The USB host interface ● Complies with USB 1.1 (Full performance specification figures indicated are nominal Speed)/ 2.0 Mass Storage values of production units. There may be some deviations from these values in individual units. Class. ● Support Bulk only and CBI General protocol. Support file ● MPEG 1 Layer 3 Power s
