Streszczenie treści zawartej na stronie nr. 1
XS1215/XS1215 +1
Series Owner's Manual
OWNER'S MANUAL
Streszczenie treści zawartej na stronie nr. 2
Contents WELCOME/ FEATURES 2 Using the Speed Dial Memory 23 CONTROLS & FUNCTIONS 3 Storing Names and Numbers in Speed Dial Memory 23 TERMS USED IN THIS MANUAL 5 Storing Caller ID Messages in Speed Dial Installing the Phone 6 Memory Locations 26 A. Choose the Best Location 6 Making Calls from Speed Dial Memory 27 B. Install the Rechargeable Battery Packs into Easy Dial (New Zealand only) 27 the Handsets 7 Caller ID and CIDCW (Caller ID on Call Waiting ) 28 C.Connect the Main Base and Charging Cra
Streszczenie treści zawartej na stronie nr. 3
Congratulations on your purchase of the Uniden single handset (XS1215) or dual handset (XS1215+1) Welcome cordless telephone. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless phone may vary. Features • Dual Handset System (Extra Handset & Voice Mail Waiting Indicator Charger Included - XS1215+1 only) Tone D
Streszczenie treści zawartej na stronie nr. 4
Controls & Functions XS1215+1 Handset XS1215 Handset 1. Handset Antenna 2. Jack for optional headset 3. Beltclip hole 4. Handset Battery Compartment 5. Handset Earpiece 6. LCD Display 7. caller id/menu key (P. 14 & 29) 8. / /vol/ (volume up/down earpiece volume, ringer volume and scroll) key (P. 15, 17 & 20) 9. /tone/ key (left cursor) key (P. 24) 10. redial/pause key (P. 19 & 25) 11. select key (P. 14 & 23) (XS1215) select/channel key (P. 14, 21 & 23) (XS1215+1) 12. Rocketdial key (P. 22) 13. t
Streszczenie treści zawartej na stronie nr. 5
Main Base Extra Charging Cradle (XS1215+1 only) 20. Main base charging 22. Charge/in use and VMWI 24. Telephone line jack contacts (Voice Mail Waiting 25. Charging contacts 21. find handset key Indicator) LED 26. Charge LED (P. 21 & 32) 23. DC IN 9V jack 27. DC IN 9V jack [4]
Streszczenie treści zawartej na stronie nr. 6
Terms Used in this Manual Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. CID - Caller ID CIDCW - Caller ID on Call Waiting RocketDial - One touch speed dial POP ID (Name Tag) - Name is shown when Caller ID matches a phonebook entry where a name is stored. [5]
Streszczenie treści zawartej na stronie nr. 7
INSTALLING THE PHONE Installing the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery pack into the handset C. Connect the base unit and charging cradle (XS1215+1 only), and charge the handset If your home has D. Mount the base unit on a wall specially wired alarm E. Choose the dialing mode equipment connected to the telephone line, A. Choose the best location be sure that installing the system does not When choosing a location for your new phone, he
Streszczenie treści zawartej na stronie nr. 8
B. Install the Rechargeable Battery Pack into the Handset The handset(s) are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the charging cradle. Use only the Uniden 1) Press down on the handset battery case cover (use (BT-905) rechargeable the finger indention for a better grip) and slide the battery pack supplied cover downward to remove. with your cordless telephone. 2) Plug the battery pack connector (red & black wires) into the jack i
Streszczenie treści zawartej na stronie nr. 9
INSTALLING THE PHONE C. Connect the Main Base and Charging Cradle (XS1215+1 only), and Charge the Handsets 1) Connect each AC adapter to the DCIN 9V jack and to each standard 240V AC wall outlet. Use only the 2) Place one handset in the main base (and the other supplied AAD- in the charging cradle - XS1215+1 only) with the 210 AC adapter. keypad facing forward. Do not use any other AC 3) Make sure the charge/in use LED (and charge adapter. LED - XS1215+1 only) illuminate. If the LED does not i
Streszczenie treści zawartej na stronie nr. 10
D. Mount the Main Base on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Locate the base unit on the wall mount adapter as shown and slide the wall mount adapter into the notches on the base bottom with the tab pressed. 2) Plug the AC adapter to the DC IN 9V jack. 3) Route the AC adapter cord through the molded wiring channel as shown. 4) Plug the AC adapter into a standard 240V AC wall outlet. 5) Plug the telephone line cord into the TEL LINE jack.
Streszczenie treści zawartej na stronie nr. 11
INSTALLING THE PHONE Direct wall mounting 3mm If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: 100mm Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths. Make sure the wall material is capable of supporting the weight of the main bas
Streszczenie treści zawartej na stronie nr. 12
Headset Installation Your phone may be used with an optional headset . To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com.au or www.uniden.co.nz.) [11]
Streszczenie treści zawartej na stronie nr. 13
REGISTER HANDSETS Register Handsets to the Main Base before Using! (XS1215+1 only) Whichever handset you choose to charge in the main base will automatically register to the main base. The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset. When you charge the 1) Be sure both handsets are fully charged. handsets, Caller ID summary 2) Remove the handset from the charging cradle, and pl
Streszczenie treści zawartej na stronie nr. 14
When to Re-register Handsets (XS1215+1 only) 1) You’ll need to re-register the second handset (follow steps on page 12) each time the digital security code is changed. Refer to page 32 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical Make sure to return the storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re- handsets to the cradles register, f
Streszczenie treści zawartej na stronie nr. 15
BASIC SETUP Basic Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and Insert 0. CIDCW option can only be set by using Handset 1. If you try to set by using Handset 2, you will not see Caller ID on Call these options listed on the LCD screen. (Handset 1 shows Handset No.1 in the display while the Waiting is currently phone is charging XS1215+1 only). unavailable in New Zealand. AutoTalk, Name Tag and Insert 0 options can be se
Streszczenie treści zawartej na stronie nr. 16
You must subscribe to Caller ID service through your local telephone provider to use this feature. 1) When the phone is in standby mode, press and hold the caller id/menu key. The following screen appears. 2) Press the /vol/ key to select CIDCW. Name Tag :On 3) Press the select key (XS1215) or the select/channel key (XS1215+1) to toggle and turn on Caller ID on Call Waiting. 4) Press the end key or return the handset to charging cradle to complete the setting. The handset returns to standby mode
Streszczenie treści zawartej na stronie nr. 17
BASIC SETUP Setting Insert 0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. 1) When the phone is in standby mode, press and hold the caller id/menu key. The following screen appears. 2) Press the /vol/ key three times to select Insert 0. Name Tag :On 3) Press the select key (XS1215) or the select/channel key (XS1215+1) to toggle and turn Insert 0 on or off. Name Tag :On 4) Pres
Streszczenie treści zawartej na stronie nr. 18
Selecting the Ring Tone and Volume Your phone has five different ringer tone/volume combinations you can choose from. 1) With the phone in standby mode, press the /vol/ or /vol/ key. 2) The phone will sound the different ring tones at different volumes. To turn the ringer off, select Ringer Off. 3) When the phone sounds the ring tone and volume you wish to use, press the end key. [17]
Streszczenie treści zawartej na stronie nr. 19
USING YOUR PHONE Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the cradle. 2) Press the talk /flash key. To turn on the 3) Listen for the dial tone. AutoTalk feature, see 4) Dial the number. "Activating Auto Talk" on page 14. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk /flash key. Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically answer the call when you pick it up.)
Streszczenie treści zawartej na stronie nr. 20
Transferring a Call (XS1215+1 only) Your cordless phone allows you to transfer outside calls from handset to handset; only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use. To transfer a call If you transfer a call 1) During a call, press the delete/transfer key. The call will and it is not picked up automatically be placed on hold and the transfer tone sounds. after
