Streszczenie treści zawartej na stronie nr. 1
21008
2.4 GHz Dual Cordless Handset
Call Waiting Caller ID Phone System
User’s Guide
1
We bring good things to life.
Streszczenie treści zawartej na stronie nr. 2
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provi
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS REGISTRATION ......................... 15 EQUIPMENT APPROVAL INFORMATION........ 2 DE-REGISTRATION .................... 16 INTERFERENCE INFORMATION ................... 2 GLOBAL DE-REGISTRATION......... 16 HEARING AID COMPATIBILITY (HAC) ........ 2 DEFAULT SETTING .................... 17 FCC RF RADIATION EXPOSURE TELEPHONE OPERATION ....................... 17 STATEMENT .................................. 5 CHARGE INDICATOR ......................... 17 INTRODUCTION ...............
Streszczenie treści zawartej na stronie nr. 4
USING INTERCOM WITH STORING CID RECORDS EXTERNAL TELEPHONE CALLS .22 (IN CALLER ID MEMORY) ................. 28 TWO-WAY CALLING ........................ 22 REVIEWING CID RECORDS ................ 28 THREE-WAY CALLING ...................... 23 STORING CID RECORDS IN INTERNAL TRANSFERRING EXTERNAL CALLS TO MEMORY ....................................... 28 OTHER HANDSETS .......................... 23 DIALING A CID NUMBER .................. 29 MEMORY........................................... 23 DELE
Streszczenie treści zawartej na stronie nr. 5
FCC RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a mininum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refe
Streszczenie treści zawartej na stronie nr. 6
Your Caller ID Call Waiting phone allows you to: •View the name and telephone number of a caller (Call Waiting Caller ID) while you are on the phone. • Identify callers before you answer the phone. •View the time and date of each incoming call. •Record up to 40 Caller ID messages sequentially. • Know who called while you are on the other line or when you were away. •Screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answering a call. IMPORTANT: Because cor
Streszczenie treści zawartej na stronie nr. 7
I N k c T a b l l e a REDIAL c n c e r HANDSET LAYOUT display MEM button EXIT button MUTE/program button format/conference button talk/callback button program MUTE EXIT MEM v format cid/vol (up or down talk arrow) buttons v REDIAL button PAGE RINGER def FLASH/DELETE button 1 abc 3 2 PAGE/INT button ghi mno 4 jkl 6 5 RINGER button pqrs wxyz 7 tuv 9 8 tone pause oper # * 0 *tone button #pause button 7 e f D n o FLASH E c l L o E v T / E d i c
Streszczenie treści zawartej na stronie nr. 8
BASE LAYOUT in use/page indicator charge indicator Back Side in use/ page charge page page button/indicator HANDSET CHARGE CRADLE LAYOUT AC power supply charge charge indicator 8
Streszczenie treści zawartej na stronie nr. 9
I I N N k k c T c T a a b b l l l l e e a REDIAL a REDIA L c c n n c c e e r r PARTS CHECKLIST Make sure your package includes the items shown here. program program MUTE EXIT MUTE MEM EXIT MEM v v format format talk in use/ talk v page v PAGE RINGER PAGE RINGER charge def 1 abc def 1 abc 3 2 3 2 ghi jkl mno 4 ghi jkl 6 mno 4 5 6 page 5 pqrs wxyz 7 pqrs tuv wxyz 7 8 tuv 9 8 9 pause tone oper pause tone oper # * 0 # * 0 Mounting Dual Handsets Belt clips Base pedestal charge Telephone line Handset
Streszczenie treści zawartej na stronie nr. 10
INSTALLATION INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not prop
Streszczenie treści zawartej na stronie nr. 11
INSTALLING THE PHONE Choose the best location to install your base and handset charge cradle. Your base and handset charge cradle should be placed on a level surface such as a desk or table top, or you may mount the base on a wall. charge CONNECTING THE AC (ELECTRICAL) POWER 1. On the base, plug one end of the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2509 (white) or 5-2512 (bl
Streszczenie treści zawartej na stronie nr. 12
INSTALLING THE HANDSET BATTERY NOTE: You must connect the handset battery before use. 1. Push down on the top of the battery compartment cover (located on the back of each handset) and remove the cover. 2. Lift the battery pack and connect it's plug to the jack inside the compartment. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration. 3. Close the battery compartment by pushing the cover up until it snaps into pla
Streszczenie treści zawartej na stronie nr. 13
PROGRAMMING THE TELEPHONE STANDBY SCREEN The handset displays the handset number and user name. USER NAME HANDSET X PROGRAMMABLE FUNCTIONS There are eight programmable menus available: Language, Handset Name, Area Code, Ringer Tone, Tone/Pulse, Registration, Deregistration, and Default Setting. LANGUAGE 1. Make sure your phone is OFF (not in talk mode). 2. Press the MUTE/program button to go to the SET LANGUAGE menu. 3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use th
Streszczenie treści zawartej na stronie nr. 14
NOTE: If you make a mistake, use the delete/flash button to backspace and delete one character at a time. 3. Press the MUTE/program button to save your name. You will hear a confirmation tone. AREA CODE 1. Press the MUTE/program button to go to the SET AREA CODE menu. The default is - - -. 2. Use the touch-tone pad to enter your 3 digit area code. 3. Press the MUTE/program button to save your selection. You will hear a confirmation tone. NOTE: Press the EXIT button once to keep the previous sett
Streszczenie treści zawartej na stronie nr. 15
1. Press the MUTE/program button to go to SET TONE/PULSE menu. 2. The default dialing mode is set to TONE. 3. Use the touch-tone pad to select 1 for TONE dialing or 2 for PULSE dialing, or use the cid/vol (up and down arrow) button to scroll to 1TONE or 2PULSE dialing. 4. Press the MUTE/program button to save your selection. You will hear a confirmation tone. NOTE: Press the EXIT button once to keep the previous setting and return to the standby screen. If you aren't sure which dialing system yo
Streszczenie treści zawartej na stronie nr. 16
DE-REGISTRATION This setting may be made with the handsets only. Deregistration cancels registration. During the de-registration process, keep the handset near the base. 1. If necessary, press the MUTE/program button to go to the DEREGISTRATION menu. The default is 2 NO. 2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the cid/ vol (up and down arrow) button to scroll to 1 YES or 2 NO. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary b
Streszczenie treści zawartej na stronie nr. 17
WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-registered. 1. Press and hold the page button on the base until the IN USE/PAGE indicator on the base flashes. 2. Press and hold the page button on the base again until the IN USE/PAGE indicator on the base flashes rapidly. 3. Press and release the page button on the base once. All handsets
Streszczenie treści zawartej na stronie nr. 18
2. Dial the number you want to call, or dial the number first then press the talk/callback button. 3. When finished, press the talk/callback button to hang up. ANSWERING CALLS 1. When the phone rings, pick up the handset, and press the talk/callback button. 2. When finished, press talk/callback to hang up. NOTE: Adjust the handset volume by pressing the cid/vol (up or down arrow) button during a call. CALL TIMER After you press the talk/callback button on the handset, the built-in call timer sho
Streszczenie treści zawartej na stronie nr. 19
1. Press the ringer button on the handset and RINGER ON 1ON 2 OFF shows in the display (if the original ringer setting is ON). 2. Use the touch-tone pad to select 1ON or 2 OFF, or use the cid/vol (up or down arrow) button to select 1ON or 2 OFF 3. Press the MUTE/program button to save your selection, or press the EXIT key to retain the original setting. NOTE: When the handset is set to RINGER OFF, the ringer off icon displays continuously until the ringer is turned on. FLASH/CALL WAITING If you
Streszczenie treści zawartej na stronie nr. 20
PAGE The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual. HANDSET TO HANDSET PAGING Dual handsets are respectively named as Handset 1 and Handset 2. 1. Make sure the phone is OFF (not in talk mode). 2. Press and release the PAGE/INT button on a handset. PAGING EXTENSION? shows in the display. 3. Use the touch-tone pad to enter the ha
