Streszczenie treści zawartej na stronie nr. 1
MAX™ EX
Installation & Operation Manual
ClearOne Communications, Inc. ~ 5225 Wiley Post Way, Salt Lake City, UT 84116 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107
Printed in China.
Streszczenie treści zawartej na stronie nr. 2
Table of Contents ii Introduction 1 Table of Contents Introduction Thank you for purchasing the ClearOne MAX™ EX expandable conferencing phone. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 MAX EX provides premium, full-duplex audio to small conference rooms as a single unit Service and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 and to
Streszczenie treści zawartej na stronie nr. 3
Introduction 2 Introduction 3 Unpacking Important safety information Carefully place the conferencing pod and base unit on a level surface. Ensure you have Read the safety instructions before first use of this product.This conferencing phone is not designed received all items shown below. for making emergency telephone calls when the power fails. Make alternative arrangements for access to emergency services. • Read and understand all instructions and follow all warnings marked on the product. •
Streszczenie treści zawartej na stronie nr. 4
Getting Started 4 Getting Started 5 Connecting to a digital phone line Getting Started WARNING! Do not connect the conference phone directly to a digital (PBX) line, PER- MANENT DAMAGE MAY RESULT. Connecting your conferencing phone If you have digital (PBX) telephone service, you need to run an analog extension from the PBX (recommended for best performance) or use a digital-to-analog telephone line con- verter. For more information, contact ClearOne Technical Support. To Link In Rear of confere
Streszczenie treści zawartej na stronie nr. 5
Getting Started 6 Getting Started 7 To access your service center Using your MAX EX conferencing phone • While in Standby mode, press and hold the 0 key for 2 seconds.This feature must To make a call be programmed before use. See page 10. 1. Press the ON/OFF key.You will hear a dial tone. To store a number in the phonebook 2. Dial the number as you would on a standard 1. Enter the phone number you want to store phone. The number appears on the LCD Figure 5. Dialing screen while conferencing po
Streszczenie treści zawartej na stronie nr. 6
User Options 8 User Options 9 To mute during ringing User Options • Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing. Note:This only mutes the current ring. Once a new call comes in, the ringer will not be muted. Call options Programming options To allow for individual preferences and enhance ease of use, eight features can be In addition to the basic phone operations described in the previous section, you can programmed: ringer melody, dialing mode, flash
Streszczenie treści zawartej na stronie nr. 7
User Options 10 User Options 11 To program local phone number To program the Automatic Gain Control (AGC) and Automatic Level Control (ALC) settings 1. Press and hold REDIAL/PROG until the Program icon appears on the LCD screen. 1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen. 2. Press 4 to enter the user phone number menu. 3. Press REDIAL/PROG. 2. Press and hold the 8 key.The current AGC setting number will be displayed on the LCD screen. Setting Speaker M
Streszczenie treści zawartej na stronie nr. 8
Maintenance 12 Maintenance 13 Try this Maintenance If you hear It could be that No dial tone Base unit is not Connect the base unit to the Caring for your MAX EX connected to telephone telephone jack using the jack. supplied telephone cable. • Follow all warnings and instructions marked on your MAX EX. You are not using an Check that you are using an • Unplug base unit and conferencing pod from the wall outlet before cleaning. analog phone line. analog phone line. Consult your • Do not use liq
Streszczenie treści zawartej na stronie nr. 9
Appendix 14 Appendix 15 Compliance Appendix FCC Part 15/ICES-003 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, Specifications pursuant to Part 15 of the FCC rules and Industry Canada ICES-003.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a DIMENSIONS (W x D x H) RECORD OUTPUT commercial environment.This equipment generates, uses, and can radiate radio frequen
Streszczenie treści zawartej na stronie nr. 10
Appendix 16 Appendix 17 IC Compliance Warranty IC: 1970A-158015 ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship. For warranty information and coverage, refer to the ClearOne website at Ringer Equivalence Number (REN): 0.1B(ac) www.clearone.com. Notice The term "IC" before the certification/registration number signifies that Industry of Canada technical ClearOne Communications Inc. specifications were met. 5225 Wiley Pos
