Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
EZ Switch 10/100 User Guide From SMC EZ line of low-cost workgroup LAN solutions 38 Tesla Irvine, CA 92618 Aug 2003 Phone: (949) 679-8000 Pub. #150000024200B R01
Streszczenie treści zawartej na stronie nr. 4
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or oth- erwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2003 by 38 Tesla Irvine, CA 92618 All rights reser
Streszczenie treści zawartej na stronie nr. 5
LIMITED WARRANTY LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, durin
Streszczenie treści zawartej na stronie nr. 6
LIMITED WARRANTY WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUME
Streszczenie treści zawartej na stronie nr. 7
COMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guar
Streszczenie treści zawartej na stronie nr. 8
COMPLIANCES EC Conformance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, o a Calle Fructuós Gelabert 6-8, 2 , 4 , 08970 - Sant Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and
Streszczenie treści zawartej na stronie nr. 9
COMPLIANCES Safety Compliance UL/CSA (C22.2 No. 60950) CB (IEC60950) Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. 4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist
Streszczenie treści zawartej na stronie nr. 10
COMPLIANCES vi
Streszczenie treści zawartej na stronie nr. 11
TABLE OF CONTENTS TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Description of Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mounting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting the Switch System . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 12
TABLE OF CONTENTS viii
Streszczenie treści zawartej na stronie nr. 13
Introduction This manual describes how to install and use EZSwitch 10/100. SMC-EZNET-16SW features 16 10/100Mbps auto-negotiation ports, providing the flexibility required for easy network expansion. The EZSwitch can be used to connect PCs, servers, hubs, bridges, other switches and routers. It can also act as a bridge between 10Mbps and 100Mbps network segments. The EZSwitch supports either 10Mbps or 100Mbps in speed, with dedicated bandwidth in each port. Truly plug and play, this EZSwitch
Streszczenie treści zawartej na stronie nr. 14
Quick Installation Guide Installing the Switch Before installing the EZ Switch 10/100, please verify that you have all the items listed under “Package Contents”. Also be sure you have all the necessary tools and cabling before installing the switch. Package Contents • 16-port 10/100Mbps Ethernet Switch • Four rubber foot pads • This User’s Manual • AC power cord • Rack mount bracket kit Description of Hardware The base unit contains 16 10BASE-T / 100BASE-TX ports. All RJ-45 ports operate at
Streszczenie treści zawartej na stronie nr. 15
Installing the Switch Mounting the Switch The EZ Switch 10/100 can be placed directly on your desktop, or mounted in a rack. Before you start installing the switch, make sure you can provide the right operating environment, including power requirements, sufficient physical space, and proximity to other network devices that are to be connected. Verify the following installation requirements: • Power requirements: 100 to 240 VAC (± 10%) at 50 to 60 Hz (± 3Hz). The switch’s power supply automa
Streszczenie treści zawartej na stronie nr. 16
Quick Installation Guide Connecting the Switch System The EZ Switch 10/100 provides 16 RJ-45 ports on the base unit. Each of these ports supports connection to 10Mbps Ethernet or 100Mbps Fast Ethernet, and supports full or half-duplex operation. The transmission speed for each port is automatically set by the switch to match the highest speed supported by the connected device. The transmission mode can be set for each port using auto-negotiation. Making a Connection to an RJ-45 Port You ca
Streszczenie treści zawartej na stronie nr. 17
Installing the Switch Powering On the Switch 1. Plug the power cord into the power socket on the rear of the switch, and the other end into a power outlet. 2. Check the LED marked Power on the front panel to see if it is on. The unit will automatically select the setting that matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel. 3. The switch performs a self-diagnostic test up
Streszczenie treści zawartej na stronie nr. 18
Quick Installation Guide Verifying System Operation Verify that all attached devices have a valid connection. The switch monitors the link status for each port. If any device is properly connected to the switch and transmitting a link beat signal, the Link indicator will light up for the corresponding port. If the Link indicator fails to light when you connect a device to the switch, check the following items: • Be sure all network cables and connectors are properly attached to the connected
Streszczenie treści zawartej na stronie nr. 19
Product Specifications Product Specifications Base Unit Physical Characteristics Access MethodCSMA/CD Standards Conformance IEEE 802.3, IEEE 802.3u Communication Rate 10/100 Mbps Communication Mode Full or Half duplex Media Supported 10BASE-T - 100-Ohm Category 3,4,5 twisted-pair 100BASE-TX - 100-Ohm Category 5 twisted-pair Number of Ports 16 RJ-45 100BASE-TX ports Indicator PanelSystem: Power; Ports: link/speed/activity, duplex Dimensions 273 x 165 x 43.8mm (10.75 x 6.5 x 1.72 Inch) Weight
Streszczenie treści zawartej na stronie nr. 20
Quick Installation Guide Troubleshooting Diagnosing Switch Indicators The EZ Switch 10/100 can be easily monitored through panel indicators to assist the network manager in identifying problems. This section describes common problems you may encounter and possible solutions. Symptom:Link indicator does not light up (green) after making a connection. Cause: Network interface (e.g., a network adapter card on the attached device), network cable, or switch port is defective. Solution: Verify th
