Streszczenie treści zawartej na stronie nr. 1
Nortel Ethernet Routing Switch 8600
Commissioning
Release: 5.0
Document Revision: 01.01
www.nortel.com
NN46205-319 323883-A Rev 01
.
Streszczenie treści zawartej na stronie nr. 2
Nortel Ethernet Routing Switch 8600 Release: 5.0 Publication: NN46205-319 Document status: Standard Document release date: 30 May 2008 Copyright © 2008 Nortel Networks All Rights Reserved. Printed in Canada and the United States of America LEGAL NOTICE While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The info
Streszczenie treści zawartej na stronie nr. 3
3 . Contents Software license 7 New in this release 11 Features 11 NNCLI 11 Other changes 11 Document changes 11 Introduction 13 Commissioning fundamentals 15 System connections 15 Terminal connection 16 Modem connection 16 System logon 19 hsecure mode 20 Setup utility 21 Secure and nonsecure protocols 25 Password encryption 26 Management port 26 Static IP entry for the OOB network management interface 27 Web management 29 Device Manager 29 Commissioning 31 Commissioning tasks 31 Initial steps u
Streszczenie treści zawartej na stronie nr. 4
4 Connecting a modem 46 Procedure job aid: PPP file 49 Configuring the switch with the setup utility 54 Procedure job aid: setup utility prompts 54 Configuring system identification 60 Configuring the time zone 62 Configuring the date 63 Specifying the primary SF/CPU 64 Changing passwords 64 Resetting passwords 68 Initial steps using the NNCLI 69 Initial commissioning procedures 69 Job aid: Roadmap of initial NNCLI commands 71 Connecting a terminal 73 Connecting a modem 74 Procedure job aid: PPP
Streszczenie treści zawartej na stronie nr. 5
5 Assigning an IP address to the management port 116 Assigning static routes to the management interface 117 Example of assigning a static route to the management interface 118 Enabling remote access services 118 Enabling the Web management interface 119 Configuring the remote host logon 120 Commissioning verification 123 Pinging an IP device 123 Using Telnet to log on to the device 124 Accessing the switch through the Web interface 124 Common procedures using Device Manager 127 Saving the confi
Streszczenie treści zawartej na stronie nr. 6
6 Nortel Ethernet Routing Switch 8600 Commissioning NN46205-319 01.01 Standard 30 May 2008 Copyright © 2008 Nortel Networks .
Streszczenie treści zawartej na stronie nr. 7
7 . Software license This section contains the Nortel Networks software license. Nortel Networks Inc. software license agreement This Software License Agreement ("License Agreement") is between you, the end-user ("Customer") and Nortel Networks Corporation and its subsidiaries and affiliates ("Nortel Networks"). PLEASE READ THE FOLLOWING CAREFULLY. YOU MUST ACCEPT THESE LICENSE TERMS IN ORDER TO DOWNLOAD AND/OR USE THE SOFTWARE. USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE AGR
Streszczenie treści zawartej na stronie nr. 8
8 Software license of this Agreement. Customer shall not a) use, copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engineer or otherwise translate the Software; c) create derivative works or modifications unless expressly authorized; or d) sublicense, rent or lease the Software. Licensors of intellectual property to Nortel Networks are beneficiaries of this provision. Upon termination or breach of the license by Custom
Streszczenie treści zawartej na stronie nr. 9
Nortel Networks Inc. software license agreement 9 software documentation and, in the event Software is licensed for or on behalf of the United States Government, the respective rights to the software and software documentation are governed by Nortel Networks standard commercial license in accordance with U.S. Federal Regulations at 48 C.F.R. Sections 12.212 (for non-DoD entities) and 48 C.F.R. 227.7202 (for DoD entities). 2. Customer may terminate the license at any time. Nortel Networks may ter
Streszczenie treści zawartej na stronie nr. 10
10 Software license Nortel Ethernet Routing Switch 8600 Commissioning NN46205-319 01.01 Standard 30 May 2008 Copyright © 2008 Nortel Networks .
Streszczenie treści zawartej na stronie nr. 11
11 . New in this release The following sections detail what’s new in Nortel Routing Switch 8600 Commissioning, NN46205-319 for Release 5.0: “Features” (page 11) “Other changes” (page 11) Features See the following sections for information about feature changes. “NNCLI” (page 11) NNCLI In Release 5.0, you can use the new Nortel Command Line Interface (NNCLI) to configure the switch. For more information about the NNCLI, see the following sections: “Initial steps using the NNCLI” (page 69)
Streszczenie treści zawartej na stronie nr. 12
12 New in this release This document is restructured to align with Nortel Customer Documentation Standards (NCDS). Nortel Ethernet Routing Switch 8600 Commissioning NN46205-319 01.01 Standard 30 May 2008 Copyright © 2008 Nortel Networks .
Streszczenie treści zawartej na stronie nr. 13
13 . Introduction This guide provides procedures to commission the Nortel Ethernet Routing Switch 8600. Navigation “Commissioning fundamentals” (page 15) “Commissioning” (page 31) “Initial steps using Device Manager” (page 33) “Initial steps using the CLI” (page 41) “Initial steps using the NNCLI” (page 69) “Remote connection configuration using Device Manager” (page 95) “Remote connection configuration using the CLI” (page 103) “Remote connection configuration using the NNCLI” (
Streszczenie treści zawartej na stronie nr. 14
14 Introduction Nortel Ethernet Routing Switch 8600 Commissioning NN46205-319 01.01 Standard 30 May 2008 Copyright © 2008 Nortel Networks .
Streszczenie treści zawartej na stronie nr. 15
15 . Commissioning fundamentals Commissioning follows hardware installation. Commissioning includes the minimal, but essential, configuration steps to provide a default, starting point configuration, set up a management interface, and establish basic security on the node. For more information about configuring security, see Nortel Ethernet Routing Switch 8600 Security, NN46205-601. Navigation “System connections” (page 15) “System logon” (page 19) “Setup utility” (page 21) “Secure and no
Streszczenie treści zawartej na stronie nr. 16
16 Commissioning fundamentals Terminal connection Connect the serial console interface (an RS-232 port) to a PC or terminal to monitor and configure the switch. The port uses a DB-9 connector that operates as data terminal equipment (DTE) or data communication equipment (DCE). The default communication protocol settings for the console port are: 9600 baud 8 data bits 1 stop bit No parity To use the console port, you need the following equipment: A terminal or teletypewriter (TTY)-compa
Streszczenie treści zawartej na stronie nr. 17
System connections 17 Table 1 DTE-to-DCE straight-through pin assignments (cont’d.) Switch Modem Signal Pin DCE DB-9 DCE DB-25 number pin number pin number Data terminal44 20 ready (DTR) Ground (GND)55 7 Data set ready66 6 (DSR) 77 4 Request to send (RTS) 5 Clear to send88 (CTS) The default communication protocol settings for the modem port are: 9600 baud 8 data bits 1 stop bit No parity Because the modem port receives DSR and CTS signals before transmitting, control lines are required i
Streszczenie treści zawartej na stronie nr. 18
18 Commissioning fundamentals Figure 1 PPP configuration topology When you configure the modem port on the switch to use PPP, you must also specify a PPP file. The PPP file is a text document which includes all additional PPP configuration parameters to include when the switch reboots. Enter one configuration parameter on each line with any required values. You can configure the connection to use the Challenge-Handshake Authentication Protocol (CHAP) or the Password Authentication Protocol (PAP)
Streszczenie treści zawartej na stronie nr. 19
System logon 19 If each user must use a different IP address, list each user with a different IP address in the file. Configure the client IP settings to use a static IP address that matches what you configure in the secrets file. An example secrets file looks like the following: long *long47.133.223.200 william * william47.133.223.200 System logon After the switch boot sequence is complete, a Login prompt appears. The following table shows the default values for logon and password for the conso
Streszczenie treści zawartej na stronie nr. 20
20 Commissioning fundamentals hsecure mode The Nortel Ethernet Routing Switch 8600 supports a flag called high secure (hsecure). hsecure introduces the following behaviors for the password: 10-character enforcement, aging time, limitation of failed logon attempts, and a protection mechanism to filter certain IP addresses. After you enable the hsecure flag, the software enforces the 10-character rule for all passwords. After you upgrade from a previous release, if the password does not contain at
