Streszczenie treści zawartej na stronie nr. 1
FES-1800
Fast Ethernet Switch
User’s Manual
Networking the future
Streszczenie treści zawartej na stronie nr. 2
Copyright Copyright © 2000 by this company. All rights reserved. No part of this documen- tation may be reproduced in any form or by any means or used to make any direc- tive work (such as translation or transformation) without permission from Xsense Connectivity, Inc. Xsense Connectivity, Inc. reserves the right to revise this docu- mentation and to make changes in content without obligation among Xsense Connectivity, Inc. to provide notification of such revision or change. All products and th
Streszczenie treści zawartej na stronie nr. 3
Quick installation This quick installation guide is provided to help the user to set up the switch in a short time. However, it is recommended that users read through this manual before trying installing the hardware. After unpacking the switch, a suitable location must be found for it. Because this switch occupies a central location in the network, it is important to find a stable hori- zontal surface which is clear of electromagnetic interference and equipped with a power outlet. Neither the
Streszczenie treści zawartej na stronie nr. 4
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IV General Features of a Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 5
Introduction Congratulations to your purchase on Xsense Fast Ethernet Switch! The Xsense Fast Ethernet switch provide you the possibility in setting up a small, medium or large size network without encountering bandwidth bottlenecks. The switch is compliant with the IEEE802.3u Fast Ethernet standard, which will power your network with a 100Mbps-transmission speed. Xsense Fast Ethernet network is ideal for transferring large files in a network and accessing to advanced applications such as videoc
Streszczenie treści zawartej na stronie nr. 6
General Features of a Switch General Features of a Switch General features of FES-1800 Switch Compliant with the IEEE802.3 10Mbps specification (10BASE-T) Compliant with the IEEE802.3u 100Mbps specification (100BASE-TX) Supports Category 5 unshielded twisted-pair cabling (UTP-5) An uplink switch on the rear panel to switch port 8 for connectivity to another Switch/Repeater hub Individual port status LEDs for LINK/ACTIVITY and Collision/Duplex status LEDs 1
Streszczenie treści zawartej na stronie nr. 7
General Features of a Switch Front panel FES-1800 Figure 1-1 The switch's front panel displays features LED (light emitting diode) indicators. (See Figure 1-1.) Rear panel FES-1800 Figure 1-2 The rear panel of the switch contains the power socket and Ethernet cable con- nectors. Its cable connectors are of RJ-45 type. RJ-45 stands for Recommended Jack No. 45, an Electronic Industries Association (EIA) designation. Each jack serves to connect a cable to the switch. LED indicators allow users to
Streszczenie treści zawartej na stronie nr. 8
Quick Overview of Networking Terminology Quick Overview of Networking Terminology Network Terminology A network is cosisted of multiple interconnected nodes. A node can be a comput- er, a server (that is, a computer dedicated to storing networked data or applica- tions), a shared peripheral (such as a printer or modem) or other networking devices (such as repeating or switching switches, routers, transceivers, etc.). A Fast Ethernet network operates at a 100Mbps (Megabits per second) transfer s
Streszczenie treści zawartej na stronie nr. 9
Quick Overview of Networking Terminology - Check the validity of each signal it receives and discard invalid signal. - Show whether each network node is currently connected, idle, transmiting data, or in half/full duplex. Indicating a collision it gives users an idea on the network's current traffic status, Collisions occur frequently in a Fast Ethernet network. Different applications are used to for different network devices. Those applica- tions performed by a switch have functions as follows:
Streszczenie treści zawartej na stronie nr. 10
What Is Fast Ethernet? What Is Fast Ethernet? Historical Background Fast Ethernet was developed in the early 90s to solve the bottleneck problems encountered by older Ethernet networks. Ethernet, however, is a networking tech- nology developed in the early 70s. Ethernet network carries data signal through thick passive cables at a speed of 10Mbp. However, signals are delivered to all nodes in the network at the same time, which resulted in frequent collisions and a lag in general network perfor
Streszczenie treści zawartej na stronie nr. 11
How to Configure a Fast Ethernet Network? How to Configure a Fast Ethernet Network? Cable Length In a Fast Ethernet network, twisted-pair cables have a length limit. No UTP or STP cable can be of more than 100 meters (328 feet). A signal can not be sent between two end nodes through more than 200 meters of twisted pair cable. In a non-uplinked network, all end nodes are thus connected to a switch through cables which do not exceed 100 meters in length. For this reason, a non-uplinked network is
Streszczenie treści zawartej na stronie nr. 12
How to Configure a Fast Ethernet Network? Different Network Topologies Varies with users' needs, the switch can be operated as a standalone device or in a multiple-switches environment. Standalone Device When one switch is in use in a network, it is a standalone switch. The switch can only be connected to users' workstations. Its main function is to exchange data in a peer-to-peer relationship. In addition to data exchange between end nodes, having access to a common pool of data requires the u
Streszczenie treści zawartej na stronie nr. 13
How to Configure a Fast Ethernet Network? Gateway A gateway is a device that connects a network to another, supporting a different protocol than the one currently used (Fast Ethernet in this case). 8
Streszczenie treści zawartej na stronie nr. 14
Installing a Switch Installing a Switch Before the Installation Before installing a switch, users must acertain that a proper operating environ- ment is provided for the network. A right operating environment for a network fea- tures these factors: - Power : The switch must be provided with a power voltage ranging from 90 to 264 VAC (with an error margin of 10%) at 50 to 60Hz (+/- 3Hz). The switch's power supply will automatically adjust itself to the power available. - Humidity : The switch a
Streszczenie treści zawartej na stronie nr. 15
Installing a Switch Connecting Hubs or Other Switches To make a switch-to-hub or switch-to-switch connection, please do the following: 1. Make sure you have the proper cables: - Use Category 3 UTP (Unshielded Twisted Pair) cables or better for 10BASE- T connections - Use Category 5 UTP cables for 100BASE-TX connections. 2. Connect UTP Cable to regular port of FES-1800 Fast Ethernet Switch, which is connected to port-8 on FES-1800 Fast Ethernet Switch. The switch must be setup to X position befo
Streszczenie treści zawartej na stronie nr. 16
Installing a Switch The users must consider the following cable requirements prior to connections: - Cables must be of a Category 5 UTP or Category 1 STP or equivalent cable type for a Fast Ethernet network. Such cables feature RJ-45 plugs at both ends and through wiring. - In a Fast Ethernet network, cable lengths must not exceed 100 meters (328 feet) between network end nodes and the switch. - All end nodes connected to a Fast Ethernet switch must be equipped with Fast Ethernet adapters compl
Streszczenie treści zawartej na stronie nr. 17
Network Management Network Management LED Indicators The switch's front panel contains indicators called light emitting diodes or LEDs. LEDs make quick diagnoses on the network's status. They allow users to know, at a glance, the kind of problem the network encounters. Different functions of LED’s are displayed on the front panel. There are five types of LEDs: Power indicator: Color : Green Label : Power This indicator turns to green when the switch is connected to the wall adapter. If the gree
Streszczenie treści zawartej na stronie nr. 18
Network Management A collision occurs as two end nodes are sending data simultaneously on the network. Collisions are frequent in a Fast Ethernet network. When a collision occurs, the two end nodes stop data transmission but backs up again later on. However, excessive collision may indicate a sign of: - Network overload - Device malfunctions - Cabling problem Troubleshooting The different LED’s displayed on the switch's front panel help users manage their networks. Here is a list of common pro
Streszczenie treści zawartej na stronie nr. 19
Network Management - Selecting a location that fits the network's configuration and ensures the switch's safety. - Being aware of cables' physical path and avoiding any interruptions. 14
Streszczenie treści zawartej na stronie nr. 20
Specifications Specifications Technical Specifications: FES-1800: Eight10/100BASE-T/TX auto-negotiating ports with RJ- 45 connectors. Chip Set: Kendin, KS 8998 LED Reports: Per Unit - Power Status Per Port - Link/Active, Full Duplex/Collision (2LEDs) Ethernet Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Cable: 10BASE-T, 2 pair UTP Cat.3,4,5. Up to 100m (328ft) 100BASE-TX 2 pair UTP Cat. 5. Up to 100m (328ft) Switching Methods: Store-and-forward. Forwarding Rate: 14,880 pps for 10Mbps
