Instrukcja obsługi NETGEAR ProSafe EthernetGS108PE-100NAS

Streszczenie treści zawartej na stronie nr. 1

GS108PE IG_21Sept2012.fm Page 1 Friday, September 21, 2012 12:13 PM
Installation Guide
ProSafe Plus 8-Port Gigabit Switch
with 4-Port PoE GS108PE

Step 1. Connect equipment Step 2. Connect power Step 3. Check status
Internet
Computer Server
Power LED PoE LEDs Port LEDs
1000 Mbps link
On PoE in use
(both LEDs)
PoE not provided 100 Mbps link
Off
(slow blinking) (left LED)

Optional
modem
10 Mbps link
PoE Max. LED
(right LED)
PoE halted
Less than 7W of PoE
(fast blinking)
power is availab

Streszczenie treści zawartej na stronie nr. 2

GS108PE IG_21Sept2012.fm Page 2 Friday, September 21, 2012 12:13 PM Specifications Set up the Switch Configuration Utility Technical Support Plus switches are plug and play.You can install a configuration utility to select After installing your device, locate the serial number on the label of your product and Specification Description additional options to manage and customize the switch for your network. This utility use it to register your product at https://my.netgear.com. is on the res