Streszczenie treści zawartej na stronie nr. 1
NETGEAR 7000 Series
Managed Switch
Administration Guide
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10194-02
May 2006
Streszczenie treści zawartej na stronie nr. 2
© 2006 by NETGEAR, Inc. All rights reserved. FullManual. Trademarks NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright Intoto, Inc. May 2006 Statement of Conditions In the interest of improving internal design, operational function, and/or
Streszczenie treści zawartej na stronie nr. 3
Note: Delete this note and the information below for products that are not wireless. FCC Information to User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed a
Streszczenie treści zawartej na stronie nr. 4
• Consult the dealer or an experienced radio/TV technician for help. 7000 Series Managed Switch Tested to Comply with FCC Standards FOR HOME OR OFFICE USE PY3WG111 Modifications made to the product, unless expressly approved byNETGEAR, Inc., could void the user's right to operate the equipment. Canadian Department of Communications Radio Interference Regulations This digital apparatus (7000 Series Managed Switch) does not exceed the Class B limits for radio-noise emissions from digital appara
Streszczenie treści zawartej na stronie nr. 5
Contents NETGEAR 7000 Series Managed Switch Administration Guide About This Book ....................................................................................................................xi Chapter 1 Getting Started In-band and Out-of-band Connectivity ............................................................................1-1 Configuring for In-band Connectivity ........................................................................1-1 Using BootP or DHCP ......................
Streszczenie treści zawartej na stronie nr. 6
Example #3: Assign Ports to VLAN3 ........................................................................3-3 Example #4: Assign VLAN3 as the Default VLAN ...................................................3-3 Graphical User Interface .................................................................................................3-4 Chapter 4 Link Aggregation CLI Example ...................................................................................................................4-1 Exampl
Streszczenie treści zawartej na stronie nr. 7
Proxy Address Resolution Protocol (ARP) ...................................................................5-21 Overview ................................................................................................................5-21 CLI Examples .........................................................................................................5-22 Example #1: show ip interface .........................................................................5-22 Example #2: ip proxy-arp ......
Streszczenie treści zawartej na stronie nr. 8
Example #2: set classofservice trust mode ..............................................................8-4 Example #3: show classofservice ip-precedence mapping ......................................8-5 Example #4: Configure Cos-queue Min-bandwidth and Strict Priority Scheduler Mode 8-5 Example #5: Set CoS Trust Mode of an Interface ....................................................8-6 Traffic Shaping ............................................................................................
Streszczenie treści zawartej na stronie nr. 9
Example #2: script list and script delete .................................................................13-2 Example #3: script apply running-config.scr ..........................................................13-2 Example #4: Creating a Configuration Script .........................................................13-3 Example #5: Upload a Configuration Script ...........................................................13-3 Chapter 14 Outbound Telnet Overview ................................
Streszczenie treści zawartej na stronie nr. 10
Chapter 18 Syslog Overview .......................................................................................................................18-1 Persistent Log Files ................................................................................................18-1 Interpreting Log Files .............................................................................................18-2 CLI Examples ............................................................................................
Streszczenie treści zawartej na stronie nr. 11
About This Book This document provides an understanding of the CLI and Web configuration options for software Release 4.3 features. Document Organization This document provides examples of the use of the switch software in a typical network. It describes the use and advantages of specific functions provided by the 7000 Series Managed Switch, and includes information on configuring those functions using the Command Line Interface and Web Interface. The switch software can operate as a Layer 2
Streszczenie treści zawartej na stronie nr. 12
NETGEAR 7000 Series Managed Switch Administration Guide • Multicast – IGMP Snooping • Security – Denial of Service – Port Security • Operating System – Dual Configuration •Tools –Alarm Manager – Traceroute – Configuration Scripting – Advance Keying – Prelogin Banner – Port Mirroring –SNTP –Syslog – Data Migration Audience Use this guide if you are a(n): • Experienced system administrator who is responsible for configuring and operating a network using switch software • Level 1 and Level 2 Sup
Streszczenie treści zawartej na stronie nr. 13
NETGEAR 7000 Series Managed Switch Administration Guide Refer to the Command Line Reference for information for the command structure Related Documentation Before proceeding, read the Release Notes for this switch product. The Release Notes detail the platform specific functionality of the Switching, Routing, SNMP, Config, Management, and other packages. • Extending the portfolio of supported switching silicon to the broadest range in the industry • Increasing the software’s Quality of Servi
Streszczenie treści zawartej na stronie nr. 14
NETGEAR 7000 Series Managed Switch Administration Guide xiv v1.1, May 2006
Streszczenie treści zawartej na stronie nr. 15
Chapter 1 Getting Started Connect a terminal to the switch to begin configuration. In-band and Out-of-band Connectivity Ask the system administrator to determine whether you will configure the switch for in-band or out-of-band connectivity. Configuring for In-band Connectivity In-band connectivity allows you to access the switch from a remote workstation using the Ethernet network. To use in-band connectivity, you must configure the switch with IP information (IP address, subnet mask, and def
Streszczenie treści zawartej na stronie nr. 16
NETGEAR 7000 Series Managed Switch Administration Guide MAC Address MAC address of the switch When you connect the switch to the network for the first time after setting up the BootP or DHCP server, it is configured with the information supplied above. The switch is ready for in-band connectivity over the network. If you do not use BootP or DHCP, access the switch through the EIA-232 port, and configure the network information as described below. Using the EIA-232 Port You can use a locally
Streszczenie treści zawartej na stronie nr. 17
NETGEAR 7000 Series Managed Switch Administration Guide config network parms ipaddress netmask gateway IP Address Unique IP address for the switch. Each IP parameter is made up of four decimal numbers, ranging from 0 to 255. The default for all IP parameters is zeroes (0.0.0.0). Subnet Subnet mask for the LAN. gateway IP address of the default router, if the switch is a node outside the IP range of the LAN. 6. To enable these changes to be retained during a reset of the switch, type Ctrl-Z
Streszczenie treści zawartej na stronie nr. 18
NETGEAR 7000 Series Managed Switch Administration Guide e. Select the proper mode under Properties. f. Select Terminal keys. Note: When using HyperTerminal with Microsoft Windows 2000, make sure that you have Windows 2000 Service Pack 2 or later installed. With Windows 2000 Service Pack 2, the arrow keys function properly in HyperTerminal's VT100 emulation. Go to www.microsoft.com for more information on Windows 2000 service packs. 3. Connect the female connector of the RS-232 crossover cab
Streszczenie treści zawartej na stronie nr. 19
NETGEAR 7000 Series Managed Switch Administration Guide • The console connection was established and the console prompt appears on the screen of a VT100 terminal or terminal equivalent. The initial switch configuration is performed through the console port. After the initial configuration, you can manage the switch either from the already-connected console port or remotely through an interface defined during the initial configuration. The switch is not configured with a default user name and
Streszczenie treści zawartej na stronie nr. 20
NETGEAR 7000 Series Managed Switch Administration Guide Software Installation This section contains procedures to help you become acquainted quickly with the switch software. Before installing switch software, you should verify that the switch operates with the most recent firmware. Quick Starting the Networking Device 1. Configure the switch for In-band or Out-of-Band connectivity. In-band connectivity allows access to the software locally or from a remote workstation. You must configure the
