Streszczenie treści zawartej na stronie nr. 1
User’s Manual
PoE Management Switch
Model No.: SP1659P
http://www.micronet.info
Streszczenie treści zawartej na stronie nr. 2
Table of Content 1. INTRODUCTION................................................................................................................ 3 1.1 PACKAGE CONTENT ................................................................................................................................................3 1.2 KEY FEATURES .......................................................................................................................................................3 1.3 PHYSICAL
Streszczenie treści zawartej na stronie nr. 3
3.18 BANDWIDTH ..........................................................................................................................................................55 3.18.1 Ingress ............................................................................................................................................................................55 3.18.2 Egress ..........................................................................................................................
Streszczenie treści zawartej na stronie nr. 4
1. Introduction Micronet SP1659P PoE Management Switch features Power over Ethernet function, which helps user to centralize power distribution and reduces the cost of power infrastructure and installation. It also supports rich layer 2 management functions, suitable for high performance workgroups and server applications. With 2 Gigabit ports for copper or fiber-optic extension, it provides a perfect solution for huge data transmission and preserves the great flexibility of network in
Streszczenie treści zawartej na stronie nr. 5
1.3 Physical Description SP1659P front view RESET Button The button provides users to restart the switch. LEDSET Button: It is used to change LED display mode (ACT / FDX / SPD). LED Status Please refer to the following table for LED definition LED Status Operation POWER On/Green Power is on CPU Blink/Green CPU is active ACT On/Green LEDSET set to Active mode FDX On/Green LEDSET set to FDX mode SPD On/Green LEDSET set to Speed mode 10/100M Port (#1 - #24): LIN
Streszczenie treści zawartej na stronie nr. 6
2. Installation This switch can be placed directly on your desktop, or mounted in a rack. If you install the device in a normal-standalone standard, the switch is an Intelligent Switch, and users can immediately use most of the features simply by attaching the cables and turning the power on. Before installing the switch, we strongly recommend: 1. The switch is placed with appropriate ventilation environment. A minimum 25mm space around the unit is recommended. 2. The switch and t
Streszczenie treści zawartej na stronie nr. 7
Note: As the switch supports 802.3ad LACP (Link Aggregation Control Protocol) capability which up to 3 groups, to build up switch-to-switch connectivity with aggregation manner is provided. 2.4 Installation of mini-GBIC module The switch provides 24 RJ-45 ports of 10/100/1000M and two mini-GBIC slots for fiber extension. Two mini-GBIC slots are respectively shared with RJ-45 port 23 & 24, but have higher priority than the two ports. If both RJ-45 port and mini-GBIC slot are in use,
Streszczenie treści zawartej na stronie nr. 8
3. Web-based User Interface 3.1 Setting up Connection This switch can be managed using a standard Web Browser from any computer attached to the network. The SNMP management feature also permits the switch to be managed from any SNMP network management station running a network management program. Factory Default value of system is: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 It supports a simple user management function allowing onl
Streszczenie treści zawartej na stronie nr. 9
3.2 Web Management Overview After you login, the switch shows you the system information as below. This page is default and tells you the basic information of the system, including “Model Name”, “System Description”, “Location”, “Contact”, “Device Name”, “System Up Time”, “Current Time”, “BIOS Version”, “Firmware Version”, “Hardware-Mechanical Version”, “Series Number”, “Host IP Address”, “Host Mac Address”, “Device Port”, “RAM Size” and “Flash Size”. With this information, you will kn
Streszczenie treści zawartej na stronie nr. 10
On the left-top corner, there is a pull-down list for Auto Logout. For the sake of security, we provide auto-logout function to protect you from illegal user as you are leaving. If you do not choose any selection in Auto Logout list, it means you turn on the Auto Logout function and the system will be logged out automatically when no action on the device 3 minutes later. If OFF is chosen, the screen will keep as it is. It is ON by default. On the left side, the main menu tree for web is li
Streszczenie treści zawartej na stronie nr. 11
Parameter description: Model name: The model name of this device. System description: As it is, this tells what this device is. Location: The location where this switch is put. (User-defined). Contact: For easily managing and maintaining device, you may write down the contact person and phone here for getting help soon. You can configure this parameter through the device’s user interface or SNMP. Device name: The name of the switch. (User-defined.) System up time: The time accumu
Streszczenie treści zawartej na stronie nr. 12
IP address: Users can configure the IP settings and fill in new values if users set the DHCP function “Disable”. Then, click button to update. When DHCP is disabled, Default: 192.168.1.1. If DHCP is enabled, this field is filled by DHCP server and will not allow user manually set it any more. Subnet mask: Default gateway: Set an IP address for a gateway to handle those packets that do not meet the routing rules predefined in the device. If a packet does not meet the criteria
Streszczenie treści zawartej na stronie nr. 13
Parameter description: Current Time: Show the current time of the system. Manual: This is the function to adjust the time manually. Filling the valid figures in the fields of Year, Month, Day, Hour, Minute and Second respectively and press button, time is adjusted. The valid figures for the parameter Year, Month, Day, Hour, Minute and Second are >=2000, 1-12, 1-31, 0-23, 0-59 and 0-59 respectively. Input the wrong figure and press button, the device will reject the time
Streszczenie treści zawartej na stronie nr. 14
Range is 1 ~ 12. Default: 1 Day: Range is 1 ~ 31. Default: 1 Hour: Range is 0 ~ 23. Default: 0 3.3.4 Account Configuration In this function, only administrator can create, modify or delete the username and password. Administrator can modify other guest identities’ password without confirming the password but it is necessary to modify the administrator-equivalent identity. Guest-equivalent identity can modify his password only. Please note that you must confirm administrat
Streszczenie treści zawartej na stronie nr. 15
Parameter description: Name: A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8 characters. VID: The switch supports two kinds of options for managed valid VLAN VID, including “Any” and “Custom”. Default is “Any”. When you choose “Custom”, you can fill in VID number. The valid VID range is 1~4094. IP Range: The switch supports two kinds of options for managed valid IP Range, including “Any” and “Custom”. Default is “Any”. In case that ”Custom” had been chos
Streszczenie treści zawartej na stronie nr. 16
devices. Parameter description: State: It is used for the activation or de-activation of VSM. Default is Enable. Role: The role that the switch would like to play in virtual stack. Two types of roles, including master and slave are offered for option. Default is Master. Group ID: It is the group identifier (GID) which signs for VSM. Valid letters are A-Z, a-z, 0-9, “ - “ and “_” characters. The maximal length is 15 characters. The most top-left button is only for Master device
Streszczenie treści zawartej na stronie nr. 17
ports in this switch. When any one of the ports in the switch changes its parameter displayed in the page, it will be automatically refreshed the port current status about every 5 seconds. Parameter description: Port No: Display the port number. The number is 1 – 26. Both port 25 and 26 are optional modules. Media: Show the media type adopted in all ports. The Port 25 and Port 26 are optional modules, which support either fiber or UTP media with either Gigabit Ethernet (1000Mbps) or
Streszczenie treści zawartej na stronie nr. 18
The local port has to be preset its capability. In port 1 – 24, they are supported Fast Ethernet with TP media only, so the result will show 100M/Full or 100M/Half, 10M/Full and 10M/Half duplex. In port 25 and port 26, if the media is 1000Mbps with TP media, it will show the combinations of 10/100M and Full/Half duplex, 1000Mbps and Full duplex only. If the media is 1000Mbps with fiber media, it will show only 1000M/Full duplex. Default: None, it depends on the result of the negotiation.
Streszczenie treści zawartej na stronie nr. 19
Display the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm, 1550nm and so on. Baud Rate: Display the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G, 10G and so on. Vendor OUI: Display the Manufacturer's OUI code which is assigned by IEEE. Vendor Name: Display the company name of the module manufacturer. Vendor P/N: Display the product name of the naming by module manufacturer. Vendor Rev (Revision): Display the module revision
Streszczenie treści zawartej na stronie nr. 20
Parameter description: State: Set the communication capability of the port is enabled or disabled. When enabled, traffic can be transmitted and received via this port. When disabled, the port is blocked and no traffic can be transferred through this port. Port State is configurable by the user. There are only two states “Enable” and “Disable” able to choose. If you set a port’s state “Disable”, then that port is prohibited to pass any traffic, even it looks Link up. Default: Enable
