Streszczenie treści zawartej na stronie nr. 1
®
A Division of Cisco Systems, Inc.
24-Port 10/100 + 2-Port Gigabit Switch
with WebView and Power over Ethernet
User Guide
WIRED
Model No.
SRW224P
Streszczenie treści zawartej na stronie nr. 2
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including
Streszczenie treści zawartej na stronie nr. 3
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Getting to Know the Switch 3 The Front Panel 3 The Back Panel 4 The Side Panel 4 RJ-45 Ports 5 The Gigabit Expansion Ports 5 The Console Port 5 Chapter 3: Connecting the Switch 6 Overview 6 Pre-Installation Considerations 7 Hardware Installation 8 Placement Options 8 Uplinking the Switch 9 Chapter 4: Configuration using the Console I
Streszczenie treści zawartej na stronie nr. 4
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Help 82 Appendix A: Fast Ethernet and Gigabit Ethernet 83 About Fast Ethernet 83 About Gigabit Ethernet 83 Appendix B: Cabling 84 Overview 84 Twisted Pair Cabling 84 Fiber Optic Cabling 84 Appendix C: Glossary 85 Appendix D: Specifications 88 Appendix E: Warranty Information 89 Appendix F: Regulatory Information 90 Appendix G: Contact Information 96
Streszczenie treści zawartej na stronie nr. 5
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet List of Figures Figure 2-1: Front Panel 3 Figure 2-2: Back Panel 4 Figure 2-3: Side Panel 4 Figure 3-1: Typical Network Configuration 6 Figure 3-2: Attaching the Switch’s Rubber Feet 8 Figure 3-3: Attaching Brackets to the Switch 9 Figure 3-4: Mounting the Switch 9 Figure 4-1: Finding Hyperterminal 10 Figure 4-2: Connection Description 10 Figure 4-3: Password Screen 10 Figure 4-4: COM1 Properties 11 Figure 4-5: Login 11
Streszczenie treści zawartej na stronie nr. 6
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Figure 4-24: Port Configuration 21 Figure 4-25: PoE Main Menu 22 Figure 4-26: Power Configuration 22 Figure 4-27: Power Port Status 22 Figure 4-28: Power Port Configuration 23 Figure 4-29: Logout 23 Figure 5-1: Address Field 24 Figure 5-2: Password Screen 24 Figure 5-3: Sys. Info - System Description 24 Figure 5-4: Sys. Info - System Information 25 Figure 5-5: Sys. Info - System Mode 26 Figure 5-6: Sys. Info - Forwarding
Streszczenie treści zawartej na stronie nr. 7
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Figure 5-28: QoS - IP Precedence/DSCP 46 Figure 5-29: QoS - IP Port 47 Figure 5-30: QoS - ACL Priority 48 Figure 5-31: QoS - Rate Limit 49 Figure 5-32: DiffServ - Diffserv Class Map 51 Figure 5-33: DiffServ Class Map - Setting Rules 51 Figure 5-34: DiffServ Class Map - Adding a Class 52 Figure 5-35: DiffServ - Diffserv Policy Map 53 Figure 5-36: DiffServ Policy Map - Adding a Policy 53 Figure 5-37: DiffServ Policy Map -
Streszczenie treści zawartej na stronie nr. 8
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Figure 5-61: Spanning Tree - Port/LAG Info 73 Figure 5-62: Spanning Tree - Information 74 Figure 5-63: SNMP - SNMP Config 75 Figure 5-64: IGMP - IGMP Conf 77 Figure 5-65: IGMP - IGMP Router Info 78 Figure 5-66: IGMP - IGMP Router Conf 78 Figure 5-67: IGMP - IP Multicast Reg Table 79 Figure 5-68: IGMP - IGMP Member Conf 79 Figure 5-69: Maintenance - Reset 80 Figure 5-70: Maintenance - File Download 80 Figure 5-71: Mainten
Streszczenie treści zawartej na stronie nr. 9
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Chapter 1: Introduction Welcome Thank you for choosing the 24-port 10/100 + 2-Port Gigabit Switch with WebView and Power over Ethernet. This Switch will allow you to network better than ever. This new Linksys rackmount Switch delivers non-blocking, wire speed switching for your 10 and 100 megabit network clients, plus multiple options for connecting to your network backbone. Twenty-four 10/100 ports wire up your works
Streszczenie treści zawartej na stronie nr. 10
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet What’s in this Guide? This user guide covers the steps for setting up and using the Switch. Chapter 1: Introduction This chapter describes the Switch’s applications and this User Guide. Chapter 2: Getting to Know the Switch This chapter describes the physical features of the Switch. Chapter 3: Connecting the Switch This chapter describes how to connect the Switch. Chapter 4: Configuration using the Console Interf
Streszczenie treści zawartej na stronie nr. 11
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Chapter 2: Getting to Know the Switch The Front Panel The Switch's LEDs and ports are located on the front panel. Figure 2-1: Front Panel LEDs System A green LED indicates that power is being supplied to the Switch. A solid, amber LED indicates that the Switch’s power-on-self-test (POST) is in progress, but when this blinks amber that indicates that the POST has failed. Link/Act A green LED indicates a functional netw
Streszczenie treści zawartej na stronie nr. 12
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Ports LAN (1-24) The LAN ports connect to Ethernet network devices, such as other switches or routers. Gigabit1 (25)/Gigabit 2 (26) The Switch is equipped with two Gigabit RJ-45 ports that are shared with two mini-GBIC ports. If a Gigabit mini-GBIC port is being used, the associated RJ-45 port cannot be used. They link to high-speed network peripheral system or clients at speeds of up to 1000Mbps. Console The Console
Streszczenie treści zawartej na stronie nr. 13
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet RJ-45 Ports The Switch is equipped with 24 auto-sensing RJ-45 ports. These RJ-45 ports support network speeds of either 10Mbps or 100Mbps, and can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10Mbps or 100Mbps), and adjust its speed and duplex accordingly. The Switch’s RJ-45 ports also support the IEEE 802.3af Power-ov
Streszczenie treści zawartej na stronie nr. 14
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Chapter 3: Connecting the Switch Overview This chapter will explain how to connect network devices to the Switch. The following diagram shows a typical network configuration. Figure 3-1: Typical Network Configuration When you connect your network devices, make sure you don’t exceed the maximum cabling distances, which are listed in the following table: Maximum Cabling Distances From To Maximum Distance Switch Switch o
Streszczenie treści zawartej na stronie nr. 15
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Pre-Installation Considerations Fast Ethernet Considerations If you will be using the Switch for Fast Ethernet (100Mbps) applications, you must observe the following guidelines: Full-Duplex As previously mentioned, the Switch provides full-duplex support for its RJ-45 ports. Full-duplex operation allows data to be sent and received simultaneously, doubling a port’s potential data throughput. If you will be using the Sw
Streszczenie treści zawartej na stronie nr. 16
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Hardware Installation To connect network devices to the Switch, follow these instructions: 1. Make sure all the devices you will connect to the Switch are powered off. 2. Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. 3. Connect the other end to a PC or other network device. 4. Repeat steps 2 and 3 to connect additional devices. If 802.3af-compliant PoE devices are connected
Streszczenie treści zawartej na stronie nr. 17
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Rack-Mount Placement To rack-mount the Switch in any standard 19-inch rack, follow the instructions described below. 1. Place the Switch on a hard flat surface with the front panel faced towards your front side 2. Attach a rack–mount bracket to one side of the Switch with the supplied screws. Figure 3-3: Attaching Brackets to the Switch 3. Secure the brackets tightly. 4. Follow the same steps to attach the other bra
Streszczenie treści zawartej na stronie nr. 18
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Chapter 4: Configuration using the Console Interface Overview The Switch features a menu-driven console interface for basic configuration. You can easily manage your network from the screens through the console port. Before you can use the console interface, you will need to configure the HyperTerminal application. Configuring the HyperTerminal Application Figure 4-1: Finding Hyperterminal 1. Click the Start button.
Streszczenie treści zawartej na stronie nr. 19
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Configuring the Switch through the Console Interface Login When you finish configuring HyperTerminal, the Login screen will appear. The first time you open the console interface, use the default username admin, and leave the password blank. You can set a new password later from the Password Setting screen. Switch Screens The console interface screens consist of a series of menus. Each menu has several options, which ar
Streszczenie treści zawartej na stronie nr. 20
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet Switch Main Menu The Main Menu screen displays six menu choices: System Configuration Menu, Port Status, Port Configuration, PoE Configuration, Help, and Logout. Figure 4-6: Switch Main Menu System Configuration Menu System Configuration Menu displays: 1. System Configuration 2. Management Settings 3. User and Password Settings 4. IP Configuration 5. File Management Figure 4-7: System Configuration Menu 6. Restore
