Streszczenie treści zawartej na stronie nr. 1
VOI-9300
SIP IP PBX
User Manual
Streszczenie treści zawartej na stronie nr. 2
Table of Content 1. INTRODUCTION...........................................................................................................................................................4 1.1. OVERVIEW..................................................................................................................................................................4 2. FEATURES......................................................................................................................
Streszczenie treści zawartej na stronie nr. 3
8.5 SWITCHBOARD (AUTO ATTENDANT SETTINGS) ............................................................................................................39 8.5.1 Prompt Message...............................................................................................................................................39 8.5.2 Operator Settings..............................................................................................................................................39 8.5.3 Auto
Streszczenie treści zawartej na stronie nr. 4
1. Introduction 1.1. Overview The VOI-9300 is an embedded Voice over IP (VoIP) PBX Server with Session Initiation Protocol (SIP) to provide IP extension phone connections for global virtual office of small-to-medium business (SMB) companys. Equipped with 4 x FXO ports, Ethernet LAN and WAN ports plus Life Line features, VOI-9300 integrates the telephony network and the data network into a manageable converged network to provide an efficient and economical PBX for global long distance
Streszczenie treści zawartej na stronie nr. 5
2. Features The VOI-9300 IP PBX is equipped with RJ45 & RJ11 connectors and is featuring as the following: SIP Server supports 50 user registrations and 20 concurrent calls SIP v1 (RFC2543), v2 (RFC3261) with MD5 authentication (RFC2069 and RFC 2617) RJ45 x 2 for Ethernet WAN and LAN ports + RJ11 x 4 for FXO ports + Life Line FXS port Supports ITU-T G.711a, G.711u, GSM/MS-GSM, G.729A/B, VAD and CNG for Speech Codec Configurations by Web Browser Embedded NAT/DHCP Server PP
Streszczenie treści zawartej na stronie nr. 6
4. Packing Content Inside the package you should find: (1) One VOI-9300 IP PBX (2) One AC100~240V to 12VDC/1A Power Adaptor (3) One Cat 5 Ethernet Cable (4) One User Manual CD 5. LED Indicators & Interface Connectors LED Indicators On the front panel of VOI-9300, there are 12 LED indicators as the following table LED Status Descriptions ON Power is Normal. POWER ACTIVE ON IP PBX is in Normal Operation ALARM ON IP PBX is at alarm status VPN ON Virtual Private Network
Streszczenie treści zawartej na stronie nr. 7
Interface Connectors 1. DC Power 12Volt DC / 1A Power Adaptor with 100~240V AC power input 2. FXO ports 4 FXO ports are for connection to PSTN lines, and numbered 1, 2, 3 and 4 from left to right. 3. Life Line port Life Line FXS port connects to an analog telephone. When power is down, the Life Line will switch to FXO port 1 for PSTN line 1. 4. WAN port Connect to a broadband ADSL/Cable modem or a WAN router. 5. LAN port Connection to PC for Web configurations or Laptop, IP
Streszczenie treści zawartej na stronie nr. 8
6. Installations WAN LAN FXO Ethernet Switch Hub ADSL modem PSTN FXS IP Phones Internet Life Line POTS 7. Reset to Factory Default IP PBX VOI-9300 can be reset back to factory default when IP address is not accessible for web configurations. The procedures are as follows: 1. Power off. 2. Press the RESET button and hold continuously, then power on. 3. Hold the RESET button until all the LED indicators start flashing for three times. It may
Streszczenie treści zawartej na stronie nr. 9
8. IP PBX Configurations by Web Browser You may enter the IP address from PC Web browser to configure VOI-9300. For example, enter http://192.168.1.1 from IE web browser to display login page as follows. Note that VOI-9300 support auto-MDIX for LAN port. If a notebook PC is directly connected to the LAN port of VOI-9300 for web configurations, the user may use the Ethernet CAT5 cable included in the accessory. 1). Please enter the default IP address http://192.168.1.1 from PC Web br
Streszczenie treści zawartej na stronie nr. 10
4). VOI-9300 provides 100 SIP user ID number accounts which can be configured as well by Web browser. The preset user ID numbers are from 2001~2010 with same password 123456. The SIP service port is default at 5060. Resource Status 2007-11-21 1 10
Streszczenie treści zawartej na stronie nr. 11
8.1 Network VOI-9300 IP-PBX provides two RJ45 connectors for LAN and WAN ports at 10/100M Ethernet interfaces. The Network will display the current status for LAN, WAN, DHCP, DDNS, and VPN settings. 8.1.1 Network Status Network Status shows all the IP addresses for LAN, WAN, VPN server and VPN clients. 2007-11-21 1 11 1
Streszczenie treści zawartej na stronie nr. 12
8.1.2 LAN Setting LAN Port can be used for IP-PBX to connect to a Notebook PC for configurations. The embedded DHCP Server will automatically assign IP address through the LAN port. MAC Address should be unique in the same network, and IP Address must be in the format of xxx.xxx.xxx.xxx and xxx is from 0 to 255, e.g. 192.168.1.1. Subnet Mask is used for network segmentation. Please make sure the mask is correct and all the VoIP devices are within the same network as VOI-9300. 8.1.
Streszczenie treści zawartej na stronie nr. 13
Static IP mode Dynamic IP Mode PPPoE Mode When VOI-9300 IP-PBX connects to ADSL Modem with PPPOE link, you may need to enter the account name and password for PPPOE. In addition, you may select the DNS server and enter the IP address for the First and Second DNS servers. 2007-11-21 1 13
Streszczenie treści zawartej na stronie nr. 14
8.1.4 DHCP Server The embedded DHCP server in NAT will automatically assign IP address to the network devices. DHCP Server Status: To show the current DHCP server status DHCP Server Start/Stop: To enable/disable DHCP Server Start/End IP Address: DHCP Server will assign an IP within the start/end IP address range, e.g. 192.168.1.100 －192.168.1.200. Note that the start IP and end IP must be in the same 192.168.1.xxx network. Mask: Usually 255.255.255.0 for subnet mask Default Gateway: T
Streszczenie treści zawartej na stronie nr. 15
Service Provider: Choose DDNS server that updates your IP address. Host Name: Set your host name that need to do DDNS update. User Name: The DDNS server requires you to supply a name and password to update your IP address. You have to register the user name and password offline to the specific DDNS server. Password: The DDNS server requires you to supply a name and password to update your IP address. You have to register the user name and password offline to the specific DDNS server
Streszczenie treści zawartej na stronie nr. 16
Example for www.dyndns.com DDNS Settings This shows the current registration of www.3322.org or www.dyndns.org for dynamic DNS service. 8.1.6 VPN Settings VPN is namely virtual private network. VPN establishes a temporary and safely connection over public network (generally Internet). Usually VPN is an extension of an intranet. It helps remote users, company branches, commercial partners and suppliers to establish a reliable and safely connection with intranet and guarantees sa
Streszczenie treści zawartej na stronie nr. 17
VPN Server Configuration for PPTP (Point-to-Point Tunnel Protocol) VPN Server: You may enable or disable VPN Server Service. UserName: For remote user when connected to VPN server. Password: For remote user when connected to VPN server. Press Update to save the configurations, and press Reboot to activate the new configurations. VPN Client Configuration for OPENVPN OpenVPN is used when the IP-PBX register as a VPN client to a remote VPN server. VPN Client Service: Y
Streszczenie treści zawartej na stronie nr. 18
8.2 System The VOI-9300 IP PBX System configurations can be set in this section. The settings include Server Ports Setting, Rate Setting, DMZ, TrustHost, Music on Hold, Hotlines, Admin Accounts, USB_Disk Setting, Voicemail Setting, and Time Zone. 8.2.1 SIP Port The SIP default port number is 5060 for VoIP Applications. The value for SIP port can be from 1 to 65535. Note that the SIP port number must be the same for all the IP-PBX and VoIP phones and TAs. HTTP Port : HTTP p
Streszczenie treści zawartej na stronie nr. 19
8.2.2 Rate Settings Rate setting is used to calculate the charges for each call. The IP PBX will generate a call record for the charges. All the charges are based on this rate table. The rate is based on the prefix to calculate the charges: Prefix: 0 Rate: 15 (cent) Time Unit ： 60 (second) This means when calling a number with 0 prefix (e.g., 01010086) ，The rate is 15 cents for every 60 seconds , and the duration less than 60 seconds will be charged the same as 60 seconds. In
Streszczenie treści zawartej na stronie nr. 20
DMZ mode: You can enable DMZ mode or disable. External IP Address: External address can be accessed by facilities from Internet. LAN n: This is the private network segments where the IP-PBX resides in. Update your settings, Submit -> Reboot. 8.2.4 Trust Host It is not need to have authentication from the call of Trusted IP Address. If the port is set at 0, all the ports from this trusted address will not need authentications. The trusted address could be either IP address or
