Streszczenie treści zawartej na stronie nr. 1
LevelOne
FSW-1609TFX
FSW-2409TFX
16/24-Port Fast Ethernet Switch
w/ fiber module slot
User Manual
Version 1.1-0609
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communica
Streszczenie treści zawartej na stronie nr. 4
TABLE OF CONTENTS ABOUT THIS GUIDE.....................................................................................................1 PURPOSE .........................................................................................................................1 TERMS/USAGE ................................................................................................................1 OVERVIEW OF THIS USER’S GUIDE ......................................................................
Streszczenie treści zawartej na stronie nr. 5
ABOUT THIS GUIDE Congratulations on your purchase of the LevelOne FSW- 1609/2409TFX 16/24-Port 10/100Mbps Fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your LevelOne 16/24Port 10/100Mbps Fast Ethernet Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your LevelOne 16/24-Port 10/100Mbps Fast Ethernet Switch, and
Streszczenie treści zawartej na stronie nr. 6
The functionality of three units is identical, except for the number of ports. Where appropriate, differences between the two units are noted. Overview of this User’s Guide Chapter 1, Introduction. Describes the Switch and its features. Chapter 2, Unpacking and Installation. Helps you get started with the basic installation of the Switch. Chapter 3, Identifying External Components. Describes the front panel, rear panel and LED indicators of the Switch. Chapter 4, Connecting the S
Streszczenie treści zawartej na stronie nr. 7
INTRODUCTION This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-T (Fast Ethernet) p
Streszczenie treści zawartej na stronie nr. 8
Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridge Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area
Streszczenie treści zawartej na stronie nr. 9
Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router, the setup and maintenance required make routers relatively impractical. Today switches are an ideal solution to most kinds of local area network congestion problems. Features The Switches were designed for easy installation and high performance in an enviro
Streszczenie treści zawartej na stronie nr. 10
upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switches now, and change adapters and hubs anytime later without needing to change the Switches or reconfigure the network. The Switches combine dynamic memory allocation with store-and-forward switching to ensure that the buffer is effectively allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss. The Switches are an u
Streszczenie treści zawartej na stronie nr. 11
is only available in half duplex mode. Data forwarding rate per port is at wire-speed for 100Mbps speed. Data forwarding rate per port is at wire-speed for 10Mbps speed. Data filtering rate eliminates all error packets, runts, etc., per port at wire-speed for 100Mbps speed. Data filtering rate eliminates all error packets, runts, etc., per port at wire-speed for 10Mbps speed. Up to 8K active MAC address entry table with self- learning and table-aging for 16-port model, up to 8K act
Streszczenie treści zawartej na stronie nr. 12
UNPACKING AND INSTALLATION This chapter provides unpacking and setup information for the Switches. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: LevelOne FSW-1609/2409TFX 16/24-Port 10/100Mbps Fast Ethernet Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning Screws and two mounting brackets This User Manual If any
Streszczenie treści zawartej na stronie nr. 13
Installation The site where you install the hub stack may greatly affect its performance. When installing, consider the following pointers: Install the Switch in a fairly cool and dry place. See Appendix B for the acceptable temperature and humidity operating ranges. Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight. Leave at least 10cm of space at the front and rear of the hub for venti
Streszczenie treści zawartej na stronie nr. 14
100Base-FX Module Installation The installation procedure for each module is the same. Additional information about each module is provided below. To install any of the modules: (Includes SC or ST type connectors) 1. Locate the module slot in the switch’s rear panel. 2. Using a screwdriver, undo the two screws and remove the dust cover on the module slot. 3. Holding the module component-side up and connector- side in, gently slide the module along the guides and seat it in the intern
Streszczenie treści zawartej na stronie nr. 15
We recommend that you retain the dust cover in case you need to remove the module for an extended period sometime in the future. In FSW-1609/2409TFX, the last port (Port 16/24) and the 100BASE-FX port is really the same port. Do not use both Port 16/24 and the 100BASE-FX port at the same time. Rack Mounting The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front
Streszczenie treści zawartej na stronie nr. 16
Then, use screws provided with the equipment rack to mount each switch in the rack. 12
Streszczenie treści zawartej na stronie nr. 17
Identifying External Components This section identifies all the major external components of the switch. Both the front and rear panels are shown, followed by a description of each panel feature. The indicator panel is described in detail in the next chapter. Front Panel The figure below shows the front panels of the switches. 16-port 10/100M Fast Ethernet Switch 24-port 10/100M Fast Ethernet Switch LED Indicator Panel Refer to the next chapter for detailed information abo
Streszczenie treści zawartej na stronie nr. 18
With the Auto-MDI/MDIX function, you just need to plug-in the network cable to the hub directly and no need to care if the end node is NIC (Network Interface Card) or switches and hubs. Rear Panel LevelOne 16/24-Port 10/100Mbps Fast Ethernet Switch Module Slots: Used to install module options for 100BASE-FX connection. AC Power Connector: For the power cord. 14
Streszczenie treści zawartej na stronie nr. 19
LED Indicators Power Indicator (PWR) This LED lights green when the switch is receiving current; if not, power is off. 100M Link/Activity, 10M Link/Activity (100M LINK/ACT(green), 10LINK/ACT(yellow)) This indicator light green when the port is connected to a 100Mbps Fast Ethernet station, if the indicator blinking green will be transmitting or received data on the 100Mbps network. Otherwise, if the indicator light amber when the port is connected to
Streszczenie treści zawartej na stronie nr. 20
CONNECTING THE SWITCH This chapter describes how to connect the Switch to your Fast Ethernet network. PC to Switch A PC can be connected to the Switch via a two-pair Category 3, 4, 5 UTP/STP straight cable. The PC (equipped with a RJ- 45 10/100Mbps phone jack) should be connected to any of the 16 ports (1x - 16x) for the 16-Port model, 24 ports (1x - 24x) for the 24-Port model. The LED indicators for PC connection dependent on the LAN card capabilities. If LED indicators are not lig
