Instrukcja obsługi Cisco Systems 1538

Streszczenie treści zawartej na stronie nr. 1

Quick Start Guide
CISCO 1538 SERIES MICRO HUB 10/100
CABLING AND START U P
1
TAKE OUT WHAT YOU NEED
2
CONNECT THE HUB TO OTHER NETWORK DEVICES
3
ASSIGN IP INFORMATION TO THE HUB
4
DISPLAY THE WEB-BASED HUB MANAGER

Streszczenie treści zawartej na stronie nr. 2

1

Streszczenie treści zawartej na stronie nr. 3

Cisco ConfigMaker Software Installation Configuration Guide Quick Start Guide 10 MBPS PWR 1 2 3 4 COL/ACT 100 MBPS COL/ACT 7 8 5 6 Take Out What You Need When you unpack the box that contains your Cisco 1538 Series Micro Hub, you should find the items shown below. Product documentation Cisco Micro Hub Cisco ConfigMaker Software (Cisco 1538M only) Power cord 1 Rollover console cable Stacking cable (50-pin SCSI) (RJ-45-to-RJ-45) (Cisco 1538M only) Plastic fastener Console-to-PC adapter Standard s

Streszczenie treści zawartej na stronie nr. 4

1x 2x 10/100 3x 4x Cisco 1538M UP SPEED LED 100BaseTX ON 10BaseTX OFF 1 23 4 RATING DOWN 100-127 /200-240 V~ 5 6 78 0.3A / 0.2 50/60 Hz MDI MDI -X 5x 6x 7x 8x CONSOLE Connect the Hub to Other Network Devices 10/100 network port (RJ-45) Ethernet cable (not supplied) Maximum cable length: 10BaseT or 328 ft (100 m) 100BaseTX port (RJ-45) Note: Use a straight-through cable to Connect the Hub to Switches connect two ports when one of the ports is and Other Hubs designated with an X. Use a c

Streszczenie treści zawartej na stronie nr. 5

1x 2x 10/100 3x 4x Cisco 1538M UP SPEED LED 100BaseTX ON 10BaseTX OFF 1 23 4 RATING DOWN 100-127 /200-240 V~ 5 678 0.3A / 0.2 50/60 Hz MDI MDI -X 5x 6x 7x 8x CONSOLE Connect the Hub to Other Network Devices (continued) Power outlet Console port (RJ-45) RJ-45-to-RJ-45 rollover console cable (supplied) RJ-45-to-DB-9 3 adapter (supplied) Connect the Console Cable Power Up the Hub Make sure console port settings of the Connect one end of the power cord to 1 1 hub match the settings of the t

Streszczenie treści zawartej na stronie nr. 6

Assign IP Information to the Hub The hub is designed to operate with little or Enter the IP address of the default 4 no user intervention. In most cases, you can gateway (for example: 10.1.105.254): use it with its default settings. Enter IP default gateway: 10.1.105.254 Assign IP information to the hub so that you The following information is displayed: can use the Cisco 1538 Hub Manager web-based interface and so that the hub can The following configuration command communicate with local

Streszczenie treści zawartej na stronie nr. 7

Display the Cisco 1538 Hub Manager If you have the IP address to the hub, you can display the Cisco 1538 Hub Manager from your intranet. You can use the Cisco 1538 Hub Manager to configure and monitor the hub. Start Netscape Communicator (4.03 or higher) or Microsoft Internet Explorer 1 (4.01 or higher). Make sure that Java and JavaScript are enabled. Enter the IP address of the hub in the URL field if you are using Communicator 2 (the Address field if you are using Internet Explorer). The C

Streszczenie treści zawartej na stronie nr. 8

Corporate Headquarters European Headquarters Americas Asia Headquarters Cisco Systems, Inc. Cisco Systems Europe s.a.r.l. Headquarters Nihon Cisco Systems K.K. 170 West Tasman Drive Parc Evolic, Batiment L1/L2 Cisco Systems, Inc. Fuji Building, 9th Floor San Jose, CA 95134-1706 16 Avenue du Quebec 170 West Tasman Drive 3-2-3 Marunouchi USA Villebon, BP 706 San Jose, CA 95134-1706 Chiyoda-ku, Tokyo 100 http://www.cisco.com 91961 Courtaboeuf Cedex USA Japan Tel: 408 526-4000 France http://www.cisc