Streszczenie treści zawartej na stronie nr. 1
™
OmniView
KVM Switch with Audio
Control multiple DVI/USB computers with
one USB keyboard and mouse, and DVI monitor
User Manual
SOHO Series
F1DD102U
F1DD104U
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Pre-Configuration . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION Congratulations on your purchase of the Belkin OmniView SOHO Series KVM Switch with Audio (the KVM Switch). Our diverse line of quality KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a competitive price. Engineered to give you control over multiple computers/servers from one console, Belkin KVM Switches come in a variety of capacities suitable for all configurations, large or small. This compact, affordable Belkin OmniView KVM Switch
Streszczenie treści zawartej na stronie nr. 4
OVERVIEW Feature Overview The OmniView SOHO Series KVM Switch with Audio (the KVM Switch) allows you to control up to four computers, with one USB keyboard and USB mouse and a DVI-D video monitor. USB Hot Keys Hot keys allow you to select ports using designated key commands from your USB keyboard. Control up to two (for the 2-port unit) or four (for the 4-port unit) computers, using a simple hot key sequence on your keyboard. AutoScan The AutoScan feature allows you to automatically scan and
Streszczenie treści zawartej na stronie nr. 5
OVERVIEW Direct-Access Port Selectors Direct-access port selectors, conveniently located on the front face of the KVM Switch, allow for simple, manual port selection. Cable Management The designed enclosure offers built-in cable management to contain connected cables. Once the cables have been connected and the shroud slid into place, the cables are conveniently maintained through the back opening. LED Display An LED display is added to the face of the KVM Switch for easy status monitoring. A l
Streszczenie treści zawartej na stronie nr. 6
OVERVIEW Equipment Requirements Cables For each USB computer to be connected to the KVM Switch, one DVI cable and one USB cable is necessary. To support resolutions of up to 1600x1200@60Hz, use Belkin KVM Cables for SOHO Series with Audio (Belkin part number F1D9201-XX) to preserve signal integrity. Cables must have DVI male to DVI male connectors. Belkin OmniView KVM Cables for SOHO Series with Audio offer the highest quality possible to ensure that your data is optimally transmitted and inclu
Streszczenie treści zawartej na stronie nr. 7
OVERVIEW Operating Systems Your KVM Switch is for use on CPUs using: Platforms ® ® ® •Windows 98/2000/Me/XP, Mac OS*, Linux * *with USB support Keyboards • Supports 101-/102-/104-/107-key USB keyboards Mice •USB-compatible USB mice with 2, 3, 4, or 5 buttons Monitors • DVI-D •VGA (with DVI to DB15 adapter) • SVGA (with DVI to DB15 adapter) ® •MultiSync (with DVI to DB15 adapter) Microphone •Multimedia microphone with 3.5mm connectors Audio •Multimedia speaker/stereo with 3.5mm connectors Power
Streszczenie treści zawartej na stronie nr. 8
OVERVIEW The back of the KVM Switch: 2nd computer DVI port—DVI 2 2nd computer audio/microphone jacks 2nd computer USB port—USB 2 1st computer audio/microphone jacks 1st computer 1st computer USB port—USB 1 DVI port–DVI 1 Console audio/microphone Console USB mouse jacks USB device ports Console USB keyboard Console DVI port RJ45 flash port 9V 1A power jack 6
Streszczenie treści zawartej na stronie nr. 9
OVERVIEW Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor; the location of your CPUs from your Console; and the length of the cables you will use to connect your computers to the KVM Switch. Cable Distance Requirements USB signals are the
Streszczenie treści zawartej na stronie nr. 10
OVERVIEW Specifications Part No.: F1DD102U, F1DD104U Power: 9V DC, 1A power adapter (required) PCs Supported: 2 (F1DD102U), 4 (F1DD104U) Monitor Supported: VGA and SVGA MultiSync, LCD (with DVI to VGA Adapter), DVI-D monitors Max Resolution: 1600x1200@60Hz Keyboard Input: USB Mouse Input: USB USB Device Ports: 2 Audio Input/Output: 3.5mm jack (stereo) Microphone Input/Output: 3.5mm jack Video Port: 24-pin DVI type CPU Connectors: DVI-I and USB “B” type LED Indicators: 2 (F1DD102U), 4 (F1DD104U)
Streszczenie treści zawartej na stronie nr. 11
STEP-BY-STEP INSTALLATION GUIDE This section provides complete instructions for the hardware setup of a single KVM Switch. (F1DD102U, F1DD104U) Installing the KVM Switch Base Hold the main housing with one hand and the base with the other. With the narrow part of the base facing toward the rear of the housing, align the hooks of the base to the base holes located underneath the housing. Put the hooks through the holes and push the base toward the front of the housing to lock the base into place.
Streszczenie treści zawartej na stronie nr. 12
STEP-BY-STEP INSTALLATION GUIDE Installing the HID USB Driver Note: On some computers, you must enable USB support on your system BIOS. Please reference your computer manufacturer’s manual or motherboard manual to verify that USB support is enabled. 1. Connect the 9V, 1A power adapter to the KVM Switch. 2. Boot up the computer you wish to connect via USB as you would normally with the USB keyboard, monitor, and USB mouse connected directly to the computer. 3. After the operating system finishes
Streszczenie treści zawartej na stronie nr. 13
STEP-BY-STEP INSTALLATION GUIDE Connecting the Console 1. Power down your computers. 2. Remove the rear panel of the KVM Switch to expose the ports. 3. Connect the USB keyboard to the designated USB port with the keyboard symbol on the KVM Switch. Note: You must connect the USB keyboard to the designated USB connector to have keyboard hot key switching functions. For more information on keyboard hot keys, see page 14. 4. Connect the USB mouse to the designated USB port with the mouse symbol on t
Streszczenie treści zawartej na stronie nr. 14
STEP-BY-STEP INSTALLATION GUIDE 7. Using the audio cable attached to your speakers, connect the male 3.5mm plug to “audio” on the Console of your KVM Switch. (This step is not required to use the KVM Switch.) 8. Using the mic cable attached to your microphone, connect the male 3.5mm plug to “mic” on the Console of your KVM Switch. (This step is not required to use the KVM Switch.) 12
Streszczenie treści zawartej na stronie nr. 15
STEP-BY-STEP INSTALLATION GUIDE Connecting the PCs 1. Using your Belkin KVM Cables for SOHO Series with Audio (Belkin part number F1D9201-XX), connect the USB cable from your computer’s USB port to the USB port on the KVM Switch. 2. Take the DVI cable and connect the male end of the cable to the DVI port on the back of the computer. Connect the other male end of the DVI cable to the back of the KVM Switch for CPU1. Repeat Steps 1 and 2 for all computers. 13
Streszczenie treści zawartej na stronie nr. 16
STEP-BY-STEP INSTALLATION GUIDE 3. Using the audio cable, connect one end of the male 3.5mm plug to the “Speaker Out” jack of your sound card or computer, and connect the other end of the “audio” jack to your KVM Switch. 4. Using a second audio cable, connect one end of the male 3.5mm plug to the “Mic Out” jack of your sound card or computer, and connect the other end of the “mic” jack to your KVM Switch. Powering Up the Systems Once all cables have been connected, turn on all CPUs that are at
Streszczenie treści zawartej na stronie nr. 17
USING YOUR KVM SWITCH You can select which computer to operate by either the direct-access port selector located on the front panel of the KVM Switch or through keyboard hot key commands. Note that it will take 1–2 seconds for the video to display after switching. This is due to the refresh rate of the video signal. There is also re-synchronization of the mouse and keyboard signal that takes place. This is normal operation and ensures that proper synchronization is established. Selecting a Compu
Streszczenie treści zawartej na stronie nr. 18
USING YOUR KVM SWITCH AutoScan Mode In AutoScan mode the KVM Switch remains on one port for 10 seconds before switching to the next. This time interval cannot be changed. To enable AutoScan mode press [SCROLL LOCK], [SCROLL LOCK], [0], [0] Note: There is no mouse or keyboard control in this mode. This is necessary to prevent errors. Otherwise, if the user is moving the mouse or using the keyboard when the KVM switches to the next port, communication between the computer and KVM Switch could be
Streszczenie treści zawartej na stronie nr. 19
BELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM Switches OmniView E Series These KVM devices allow you to control two or four computers from one console and make switching between computers more convenient. Designed for compatibility with your PS/2 platform, they reduce desktop clutter and provide a simple, reliable solution at a lower price point. High-quality resolution of up to 2048x1536@85Hz is supported through the E Series KVM Switch when used with coaxial VGA cabling, offering the highes
Streszczenie treści zawartej na stronie nr. 20
BELKIN KVM SWITCHES AND ACCESSORIES OmniView PRO2 Series with On-Screen Display OmniView PRO2 Series KVM Switches deliver reliability, performance, and centralized control necessary for today’s enterprise environment. This series of KVM Switches enables you to control multiple platform servers from a single console. Available in the desktop-style, 4-port, and the 19- inch rack-mountable. 8- and 16-port models, the OmniView PRO2 Series KVM Switch expands easily for full control of as many as 256
