Streszczenie treści zawartej na stronie nr. 1
U
RX-V630
AV Receiver
OWNER’S MANUAL
0100V630(U)-cv1 1 12/27/01, 7:45 PM
Streszczenie treści zawartej na stronie nr. 2
SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the CAUTION product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or CAUTION: TO REDUCE THE RISK OF
Streszczenie treści zawartej na stronie nr. 3
SAFETY INSTR SAFETY INSTR UCTIONS UCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the that are covered by the operating instructions as an antenna or cable system is grounded so as to provide some improper adjustment of other controls may result in protection against voltage surges and built-up static damage and will oft
Streszczenie treści zawartej na stronie nr. 4
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 13 To prevent damage by lightning, disconnect the manual carefully. Keep it in a safe place for future power cord from the wall outlet during an reference. electrical storm. 2 Install this unit in a well ventilated, cool, dry, clean 14 Take care of this unit so that no foreign objects place with at least 30 cm on the top, 20 cm on the and/or liquid drops inside this unit. left and right, and 10 cm
Streszczenie treści zawartej na stronie nr. 5
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION OPERATION INFORMATION English INTRODUCTION CONTENTS INTRODUCTION ADVANCED OPERATION CONTENTS ............................................................ 1 SET MENU ........................................................... 40 FEATURES ............................................................. 2 Adjusting the items on the SET MENU .................. 40 1 SPEAKER SET (speaker mode settings) ............ 41 GETTING STARTED...........
Streszczenie treści zawartej na stronie nr. 6
FEATURES Built-in 6-channel power amplifier Other features Minimum RMS output power 96-kHz/24-bit D/A converter (0.06% THD, 20 Hz – 20 kHz, 8Ω ) “SET MENU” for optimizing this unit for your Main: 75 W + 75 W Audio/Video system Center: 75 W Test tone generator for easier speaker balance Rear: 75 W + 75 W adjustment Rear center: 75 W 6-channel external decoder input S-video signal input/output capability Multi-mode digital sound field Component video input/output capability processin
Streszczenie treści zawartej na stronie nr. 7
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English GETTING STARTED Checking the package contents Check your package to make sure it contains the following items. Batteries (4) AM loop antenna Remote control Indoor FM antenna (AAA, R03, UM-4) (U.S.A., Canada, China, CODE SET TRANSMIT SYSTEM Korea and General models) POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD D-TV/CBL V-AUX 6CH INPUT VCR 1 VCR2/DVR A AMP + + + TV VOL TV CH VOLUME –
Streszczenie treści zawartej na stronie nr. 8
CONTROLS AND FUNCTIONS Front panel 123 456 7 INPUT VOLUME INPUT M0DE 6CH INPUT NATURAL SOUND AV RECEIVER PRESET/TUNING FM/AM STANDBY EDIT /ON TUNING MODE MEMORY AUTO/MAN'L MONO MAN'L/AUTO FM BASS TREBLE SILENT SPEAKERS VIDEO AUX AB STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – + – + S VIDEO VIDEO LR AUDIO OPTICAL 8q 90we r ty PRESET/TUNING FM/AM EDIT TUNING MODE MEMORY AUTO/MAN'L MONO MAN'L/AUTO FM up i o 1 STANDBY/ON 5 INPUT l / h Turns this unit on, or set it to the standby mode. Wh
Streszczenie treści zawartej na stronie nr. 9
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONTROLS AND FUNCTIONS 0 STEREO/EFFECT u PRESET/TUNING (EDIT) Switches between normal stereo and DSP effect Switches the function of PRESET/TUNING l / h reproduction. When STEREO is selected, 2-channel between selecting a preset station number and tuning (the signals are directed to the main left and right speakers colon (:) turns on or off). without effect sounds and all Dolby Digital and DTS T
Streszczenie treści zawartej na stronie nr. 10
CONTROLS AND FUNCTIONS Remote control This section describes the remote control controls and 1 Infrared window their functions. Make sure that the AMP mode is selected Outputs infrared control signals. Aim this window at the before starting operation. See “REMOTE CONTROL component you want to operate. FEATURES” on pages 46 to 48. 2 CODE SET Used when setting up the manufacturer code (see page 1 8 47). CODE SET TRANSMIT 9 2 SYSTEM 3 Input selector buttons POWER POWER STANDBY POWER Select the inpu
Streszczenie treści zawartej na stronie nr. 11
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONTROLS AND FUNCTIONS u STEREO/EFFECT Using the remote control Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS INPUT VOLUME INPUT M0DE 6CH INPUT NATURAL SOUND AV RECEIVER signals (except the LFE channel) are mixed down to the PRESET/TUNING
Streszczenie treści zawartej na stronie nr. 12
CONTROLS AND FUNCTIONS Front panel display 12 34 MATRIX VCR1 V-AUX D-TV/CBL DVD - VCR2/DVR MD/CD R TUNER CD VIRTUAL MUTE VOLUME DIGITAL DTS DOLBY DIGITAL PRO LOGIC STEREO AUTO SLEEP SILENT MOVIE THTR 12ENTERTAINMENT TUNED MEMORY PRO LOGIC / LC R DSP dB LFE RL RC RR PCM mS 57 6 89 0qwert 1 Processor indicators 0 STEREO indicator Lights up when the t, g, VIRTUAL, Lights up when this unit is receiving a strong signal for an PRO LOGIC / DSP or are activated. FM stereo broadcast while the “AUTO” in
Streszczenie treści zawartej na stronie nr. 13
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English PREPARATION SPEAKER SETUP Speakers Speaker placement This unit has been designed to provide the best sound- Refer to the following diagram when you place the field quality with a 6-speaker system, using main left and speakers. right speakers, rear left and right speakers, a center Center speaker Main speaker (R) speaker, and a rear center speaker. If you use different Rear speaker (R) brands of
Streszczenie treści zawartej na stronie nr. 14
SPEAKER SETUP Connecting the speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Do not let the bare speaker wires touch each other or any metal part of this unit. This could dam
Streszczenie treści zawartej na stronie nr. 15
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English SPEAKER SETUP Main B speaker Main A speaker Right Left Right Left Center speaker 1 2 3 SPEAKERS MAIN REAR CENTER CENTER R L DIGITAL AUDIO AUDIO VIDEO + + + INPUT R L S VIDEO VIDEO A OUT VCR 2 CD – – – /VDR IN TUNER CD COAXIAL AM ANT OPTICAL – – D-TV/CBL OUT OUT (REC) COMPONENT VIDEO GND MD PR/CR PB/CB Y VCR 1 B /CD-R DVD IN AC OUTLETS DVD (PLAY) IN + + 75 UNBAL. D-TV /CBL REAR R L R (SURROUN
Streszczenie treści zawartej na stronie nr. 16
SPEAKER SETUP IMPEDANCE SELECTOR switch WARNING Do not change setting of the IMPEDANCE SELECTOR switch when the power of this unit is on, this may damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If so, slide the switch all the way to either position when this unit is in the standby mode. Select the switch position (left or right) according to the impedance of the speakers in you
Streszczenie treści zawartej na stronie nr. 17
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONNECTIONS Connecting to digital jacks Before connecting components This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital CAUTION and DTS bitstreams. To enjoy multi-channel sound track Do not connect this unit or other components to the of DVD software, etc. with DSP effect
Streszczenie treści zawartej na stronie nr. 18
CONNECTIONS y Connecting video components • If your video component has an S-video output or component video output, connect the S-video signal output jack on the Refer to the connection examples on the next page. component to the S VIDEO jack or connect the component video signal output jacks on the component to the Types of video jacks COMPONENT VIDEO jacks. • The AUDIO jacks are available for a video component which There are three types of video jacks as follows: does not have optical digi
Streszczenie treści zawartej na stronie nr. 19
BASIC OPERA- ADVANCED ADDITIONAL INTRODUCTION PREPARATION TION OPERATION INFORMATION APPENDIX English CONNECTIONS O TV/digital TV/ OPTICAL VCR 1 OUTPUT cable TV AUDIO AUDIO VIDEO VIDEO VIDEO OUTPUT INPUT INPUT OUTPUT OUTPUT L R L R V V V AUDIO AUDIO VIDEO DIGITAL INPUT R L S VIDEO VIDEO OUT R L VCR 2 CD /VDR IN TUNER CD COAXIAL AM ANT OPTICAL D-TV/CBL OUT OUT (REC) COMPONENT VIDEO GND MD VCR 1 PR/CR PB/CB Y /CD-R DVD IN DVD (PLAY) IN 75 UNBAL. D-TV /CBL D-TV FM MD/CD-R MAIN /CBL ANT MONITOR O
Streszczenie treści zawartej na stronie nr. 20
CONNECTIONS y Connecting audio components • The AUDIO jacks are available for an CD recorder or MD recorder which does not have optical digital input or output jack. Connecting a CD player Connect the coaxial digital output jack on your CD player Notes to the DIGITAL INPUT CD jack. • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is y off, this unit may distort the sound from other components. • The AUDIO jacks are avail
