Streszczenie treści zawartej na stronie nr. 1
AUDIO/VIDEO CONTROL RECEIVER
RX-6040B/RX-6042S
RX-5040B/RX-5042S/RX-5045B
TA/NEWS/INFO
DISPLAY MODE
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1140-001A
[J]
Cover_RX-60_5040[J]f.p65 3 03.12.18, 15:19
Streszczenie treści zawartej na stronie nr. 2
Warnings, Cautions and Others/ Mises en garde, précautions et indications diverses For U.S.A CAUTION RISK OF ELECTRIC SHOCK This equipment has been tested and found to comply with the limits DO NOT OPEN for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. harmful interference in a residential installation. DO NOT REMOVE COVER (OR
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Adjusting Sound ........................................ 23 Parts Identification...................................... 2 Getting Started........................................... 5 Basic Adjustment Items ............................................................ 23 Basic Procedure ........................................................................ 23 Before Installation ...................................................................... 5 7 Adjusting the Equalization
Streszczenie treści zawartej na stronie nr. 4
Parts Identification Front Panel 1 2 34 5 6 7 8 9 p MASTER VOLUME RX–6030V AUDIO/VIDEO CONTROL RECEIVER STANDBY SURROUND DIMMER STANDBY/ON DSP INPUT DIGITAL DUAL MONO 3D - PHONIC VIRTUAL SB TUNED STEREO AUTO MUTING SLEEP H.PHONE PROLOGIC DSP DIGITAL EQ BASS BOOST INPUT ATT VOLUME SURROUND/DSP 96/24 OFF INPUT ANALOG SB INPUT ATT MULTI JOG SETTING ADJUST QUICK SPEAKER PHONES EXIT DIGITAL SPEAKERS SUBWOOFER OUT FM/AM TUNING FM/AM PRESET FM MODE MEMORY SETUP PRO LOGIC PUSH SET ON/OFF ON/
Streszczenie treści zawartej na stronie nr. 5
Display 1324 567890-=~ ! @ 3D - PHONIC VIRTUAL SB TUNED AUTO MUTING SLEEP DUAL MONO STEREO H.PHONE PROLOGIC DSP DIGITAL EQ BASS BOOST INPUT ATT VOLUME 96/24 SB # $%^ 0 TUNED indicator (16) See pages in parentheses for details. - STEREO indicator (16) 1 ANALOG indicator (14) = INPUT ATT indicator (14) 2 DUAL MONO indicator (26, 27) ~ AUTO MUTING indicator (17) 3 H.PHONE indicator (13, 26, 28) ! SLEEP indicator (15) 4 3D-PHONIC indicator (26, 28) @ VOLUME indicator (11) 5 VIRTUAL SB indicator (2
Streszczenie treści zawartej na stronie nr. 6
Parts Identification Rear Panel RX-6040B/RX-6042S 14 2365 DIGITAL 1 YPB PR AV (DVD) COMPU LINK-III MONITOR OUT COMPU LINK-4 CD (SYNCHRO) DVD IN AM IN DIGITAL 2 ( CD ) MONITOR EXT OUT OUT AUDIO (REC) VCR AM TAPE LOOP IN RIGHT LEFT /CDR DIGITAL 3 ( TV ) IN DVD FRONT CENTER SURROUND FRONT (PLAY) IN SPEAKER SPEAKERS SPEAKERS CAUTION : DVD IN RIGHT LEFT RIGHT LEFT SPEAKER IMPEDANCE OUT SUB OUT 816 (REC) WOOFER (REC) DIGITAL IN CENTER FM 75 VCR VCR COAXIAL SURR IN IN ANTENNA (PLAY) (PLAY) RIGHT LEFT
Streszczenie treści zawartej na stronie nr. 7
Getting Started This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply. Notes: Before Installation • Supplied batteries are for the initial setup. Replace for continued use. General Precautions • After replacing the batteries, set the manufacturers’ codes again • Be sure your hands are dry. (see pages 35 and 36). • Turn the power off to all components. • Read the manuals supplied with the components you are going to CAUTION:
Streszczenie treści zawartej na stronie nr. 8
Getting Started AM antenna connections Connecting the speakers For RX-6040B/RX-6042S 1 2 3 4 AM Loop Antenna (supplied) AM EXT AM LOOP For RX-5040B/RX-5042S/RX-5045B 1 2 3 4 Snap the tabs on the loop into the slots of the base to assemble the AM loop FM 75 antenna. COAXIAL ANTENNA 23 1 For each speaker (except for a subwoofer), connect the (+) and (–) terminals on the rear panel to the (+) and (–) terminals marked on the speakers. Outdoor single vinyl-covered wire (not supplied) Turn the loop un
Streszczenie treści zawartej na stronie nr. 9
Connecting the subwoofer Connecting Audio/Video Components You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the rear panel, When connecting individual components, refer also to the manuals using a cable with RCA pin plugs (not supplied). supplied with them. Analog Connections Audio component connections Use the cables with RCA pin plugs (not supplied). • Connect the white plug to the audio left jack, and the red plug to the audio right jack. If
Streszczenie treści zawartej na stronie nr. 10
Getting Started Video component connections TV Use the cables with RCA pin plugs (not supplied). Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack. • For RX-6040B/RX-6042S: If your video components have the video input/output jacks of different types, connect them by using these jacks, you can get better picture quality in the order: Component video > S-video > Composite video However, the video signals from one type of the
Streszczenie treści zawartej na stronie nr. 11
DVD player Only for RX-6040B/RX-6042S • When you connect a DVD player with stereo output jacks: • When you connect a DVD player with its analog discrete output (5.1-channel reproduction) jacks: This connection is the best connection method for enjoying DVD Audio sounds. • When a DVD Audio disc is played back, the original high- quality sounds can be reproduced only using this connection. Only for RX-6040B/RX-6042S Green Blue DVD IN Red Green DVD AUDIO IN Blue DVD RIGHT LEFT IN Red FRONT DVD IN S
Streszczenie treści zawartej na stronie nr. 12
Getting Started Digital Connections Notes: By connecting the receiver and the source component through the • When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components: digital terminals, sound reproduction quality will be much improved. – DIGITAL 1 (coaxial): For DVD player In addition, you can enjoy multi-channel reproduction and some – DIGITAL 2 (optical): For CD player other convenient functions. Only for RX-6040B/RX-6042S: – DIGITAL 3 (optica
Streszczenie treści zawartej na stronie nr. 13
Basic Operations The following operations are commonly used when you play any sound sources. Operations hereafter will be explained using the buttons on the front panel. You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks. Daily Operational Procedure Selecting the Source to Play When you have connected digital source components using the digital terminals, first change the input mode for these components to the digital input mod
Streszczenie treści zawartej na stronie nr. 14
Basic Operations Speaker and signal indicators on the display Selecting different sources for picture and sound By checking the following indicators, you can easily confirm which speakers you are activating and which signals are coming into this While watching pictures from a video source, you can listen to receiver. sound of an audio source. • Once you have selected a video source, pictures of the selected Speaker indicators Signal indicators source are sent to the TV until you select another v
Streszczenie treści zawartej na stronie nr. 15
Listening with headphones: Remote Selecting the Analog or Digital Input Mode NOT You can enjoy not only stereo software but also multi- channel software through the headphones. (Sounds are When you have connected digital source components using the both down-mixed to the front channels while playing multi-channel analog and digital terminals (see pages 7 to 10), you can select the software.) input mode—either digital or analog—for these components. 1 Press SPEAKERS ON/OFF to deactivate the speak
Streszczenie treści zawartej na stronie nr. 16
Basic Operations When playing software encoded with Dolby Digital or DTS, the Remote Attenuating the Input Signal NOT following symptoms may occur: • Sound does not come out at the beginning of playback. When the input level of the analog source is too high, the sounds • Noise comes out while searching for or skipping chapters or will be distorted. If this happens, you need to attenuate the input tracks. signal level to prevent the sound distortion. In this case, press INPUT DIGITAL repeatedly t
Streszczenie treści zawartej na stronie nr. 17
Using the Sleep Timer The following basic operations are possible only using the remote control. Using the Sleep Timer, you can fall asleep while listening to music. When the shut-off time comes, the receiver turns off automatically. Press SLEEP repeatedly. The SLEEP indicator lights up on the display, and the shut-off time changes in 10 minutes intervals: 10 20 30 40 50 60 70 80 90 TA/NEWS/INFO SLEEP (Canceled) OFF Using the Sleep Timer REW FF REC PAUSE CD-DISC To check or change the time remai
Streszczenie treści zawartej na stronie nr. 18
Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. Remote Tuning in to Stations Manually Using Preset Tuning NOT 1 Select the band (FM or AM). Once a station is assigned to a channel number, the station can be • For RX-6040B/RX-6042S: Press FM or AM. quickly tuned in. You can preset up to 30 FM and 15 AM stations. • For RX-5040B/RX-5042S/RX-5045B: Press FM/AM. To store the preset stations Each time you press th
Streszczenie treści zawartej na stronie nr. 19
To tune in a preset station Selecting the FM Reception Mode On the front panel: When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast. 1 Select the band (FM or AM). • You can store the FM reception mode for each preset station (see • For RX-6040B/RX-6042S: Press FM or AM. page 16). • For RX-5040B/RX-5042S/RX-5045B: Press FM/AM. Each time you press the button, the band alternates between While listening to an FM station, pres
Streszczenie treści zawartej na stronie nr. 20
Basic Settings Some of the following settings are required after connecting and positioning your speakers while others will make operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration. Remote 5 Press in MULTI JOG (PUSH SET). Quick Speaker Setup NOT “COMPLETE” appears on the display, then goes back to the source indication. Quick Speaker Setup helps you to easily and quickly register the speaker size and speaker distance according to your listening room Not
