Streszczenie treści zawartej na stronie nr. 1
AV SURROUND RECEIVER
AVR-5700
OPERATING INSTRUCTIONS
RC-853
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
123
TV/DBS V.AUX PHONO
4 56
VCR-1 CD MD / TAPE-1 CHANNEL
789
VCR-2 TAPE-2 MON
TV/VCR
+10 0 A / B
MASTER VOLUME
INPUT SELECTOR
VOLUME LEVEL VOLUME DISC SKIP+
REMOTE SENSOR
CH INDICATOR
L C R LOCK DOLBY / DTS
HOME THX CINEMA SURROUND DIRECT
ON / STANDBY
SL S SR LFE DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
ON / STANDBY
DECK MD
HOME
Streszczenie treści zawartej na stronie nr. 2
2 SAFETY PRECAUTIONS CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS CAUTION THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE RISK OF ELECTRIC SHOCK EXPOSURE. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTENTION REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FICHE POLARISEE AVEC UN
Streszczenie treści zawartej na stronie nr. 3
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating 12. Power-Cord Protection – Power-supply cords should be instructions should be read before the appliance is routed so that they are not likely to be walked on or operated. pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience 2. Retain Instructions – The safety and operating instructions receptacles, and the point where they exit from the should be retained for future refer
Streszczenie treści zawartej na stronie nr. 4
2 INTRODUCTION Thank you for choosing the DENON AVR-5700 Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF
Streszczenie treści zawartej na stronie nr. 5
3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not • Whenever the power switch is in the OFF state, the apparatus connected is still connected on AC line voltage. A clicking noise may be produced if the input function is switched Please be sure to unplug the cord when you leave home for, when nothing is connected to the input jacks. If this happens, say, a vacation. either turn down the MASTER VOLUME control or connect components to the input jacks. • Opening and clos
Streszczenie treści zawartej na stronie nr. 6
5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Note that binding pin plug cords together with AC cords or placing them near a • Be sure to connect the left and right channels properly (left with left, right with right). power transformer will result in generating hum or other noise. • Insert the plugs securely. Incomplete connections will result in the generation of • Noise or humming may be generated if a connected audio equipment is used noise. independ
Streszczenie treści zawartej na stronie nr. 7
Connecting video components • To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in sound quality. • When making connections, also refer to the operating instructions of the other components. Connecting a TV/DBS tuner TV or DBS tuner TV/DBS VIDEO • Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the (yellow) TV/DBS IN jack using a AUDIO VIDEO OUT R L OUT 75 Ω/ohms video coaxial pin plug cord. AUDIO • Co
Streszczenie treści zawartej na stronie nr. 8
Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other. • Precaution when using S-jacks This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from the S-jacks are only output from the S-jack o
Streszczenie treści zawartej na stronie nr. 9
Connecting the antenna terminals DIRECTION OF BROADCASTING AM LOOP STATION ANTENNA (An Accessory) FM ANTENNA F-type converter plug (attached) • When using the FM antenna FEEDER attach to this apparatus CABLE 75 Ω/ohms IN MULTI MONITOR SOURCE PHONO FM OUT-1 COAXIAL OUT COAX. R L 75 CABLE MONITOR SIGNAL CD FRONT OUT-2 GND CENTER LOOP SUB DVD DVD ANT. WOOFER AM IN VDP SURROUND VDP ANTENNA TERMINALS TV/ TV/ EFECT DBS DBS R L PREOUT V.AUX V.AUX 6CH EXT. IN OUT R L FR FL VCR-1 VCR-1 VCR-1 FM INDOOR
Streszczenie treści zawartej na stronie nr. 10
Connecting a Video Component Equipped with Color Difference (Component - Y, R-Y, B-Y) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jac
Streszczenie treści zawartej na stronie nr. 11
Connecting the external input (EXT. IN) jacks • These input jacks are for inputting multi-channel audio signals in high definition MUSE 3-1 format, multi-channel audio signals from an MPEG multi-channel decoder, or future multi-channel sound format, etc. • When making connections, also refer to the operating instructions of the other components. IN MULTI MONITOR SOURCE PHONO FM OUT-1 OUT COAX. YCB CR YCB CR Y R L 75 IN IN MONITOR DVD TV/DBS SIGNAL CD FRONT OUT-2 COMPONENT VIDEO GND CENTER When c
Streszczenie treści zawartej na stronie nr. 12
Speaker system connections • Connect the speaker terminals with the speakers making sure that like Speaker Impedance polarities are matched ( < with < , > with > ). Mismatching of polarities • Speakers with an impedance of from 6 to 16 Ω/ohms can be connected for will result in weak central sound, unclear orientation of the various use as front and center speakers. instruments, and the sense of direction of the stereo being impaired. • Be careful when using two pairs of surround speakers (A + B)
Streszczenie treści zawartej na stronie nr. 13
Protector circuit • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cu
Streszczenie treści zawartej na stronie nr. 14
6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). 28 27 26 25 24 23 34 33 32 31 30 29 MASTER VOLUME INPUT SELECTOR VOLUME LEVEL REMOTE SENSOR CH INDICATOR C LOCK L R ON / STANDBY SL S SR LFE ON / STANDBY HOME SURROUND SPEAKER THX CINEMA TAPE-2 MON A B PHONO CD TUNER DVD VDP TV / DBS VCR-1 VCR-2 V. AUX MD / TAPE-1 TAPE-2 MON OFF 14 15 16 17 18 19 20 BASS TREBLE SURROUND MODE TUNING PRESET DOLBY / DTS WIDE 5CH DSP PHO
Streszczenie treści zawartej na stronie nr. 15
Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). Remote control signal transmitter………………………………(28) LEDs (indicators) ………………………(33) RC-853 START LEARNED/TX SYSTEM CALL POWER SYSTEM CALL buttons ………………(34) SET CALL OFF ON / SOURCE Power button …………………………(36) DVD VDP TUNER SHIFT 123 TV/DBS V.AUX PHONO Input source selector Tuner buttons …………………………(52) 4 56 buttons …………………………………(37) VCR-1 CD MD / TAPE-1 CHANNEL 789 VCR-2 TAPE-2 MON TV/V
Streszczenie treści zawartej na stronie nr. 16
7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-5700’s on-screen display function. These settings are required to set up the listening room’s AV system centered around the AVR-5700. • Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup menu. DECK MD AUDIO CD LOCK MUTING S
Streszczenie treści zawartej na stronie nr. 17
• Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor: Center speaker system Subwoofer Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the Surround speaker systems screen as possible. With the AVR-5700 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources
Streszczenie treści zawartej na stronie nr. 18
Before setting up the system Check that all the connections are correct, then turn on the main unit’s power. 1 Display the System Setup Menu. SYSTEM 2 SETUP TITLE Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used. At the System Setup Menu select “Speaker Configuration”. 1 Switch to the speaker configuration screen. 2 ENTER Set whether o
Streszczenie treści zawartej na stronie nr. 19
Enter the setting. a) If no surround speakers are used (if “None” is set for both A and B): 4 ENTER The System Setup Menu reappears. b) If both surround speakers A and B are used (if either “Large” or “Small” is set for both A and B): The surround speaker setting screen appears. c) If “None” is set for surround speakers A: “None” is automatically set for surround speakers B. NOTE: • Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity
Streszczenie treści zawartej na stronie nr. 20
Switch to the Bass Output screen. 2 ENTER Select the bass signal playback mode. 3 Enter the setting. The System Setup Menu reappears. 4 ENTER Playback modes Subwoofer Only THX (recommended THX mode) The LFE and the low frequencies (80 Hz or lower) of the channels set to “Small” at the Speaker Configuration screen are output from the subwoofer. When a channel is set to “Large”, the low frequencies are output from that channel and not from the subwoofer. Front & Subwoofer: Even if “Large” is set f
