Streszczenie treści zawartej na stronie nr. 1
0311
rd
AX Series Audio-Video Adaptor for 3 Party Transmission Equipment
- INSTRUCTIONS -
The AXW-AVT and AXW-AVR are designed to allow connection of a standard AX-series audio video door
rd
station (or audio-only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3 party
transmission equipment (fiber optics, Ethernet, etc.) and converting it back via the AXW-AVR to a signal
compatible with the AX-series exchange unit. External video input/output is provided at both
Streszczenie treści zawartej na stronie nr. 2
AXW-AVR CALL AUDIO RELAY CEU OUT IN OUT IN OUT IN NO NO + - + - + - + - 75 OHM OFF ON VIDEO AXW-AVR AXW-AVR TERMINAL DEFINITIONS: RELAY NO, NO: Normally Open relay contact, activated whenever communication is active. CALL IN/OUT: Transistor-switched input / output to be connected to relay input / output on transmission equipment. ‘Call In’ indicates call placed by door station, ‘Call Out’ indicates master-initiated activity (polarity of input / output indicated by ‘+’ and ‘-
Streszczenie treści zawartej na stronie nr. 3
AUDIO C.C. DATA CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-AiphoneAX1-XS), 1 of 2 Configuration Notes (1 of 2, continued): AX-DM or IE/IF-Series AXW-AVT 4. When the SENSOR input is used, the door station will be turned on PS-2420UL Audio Door Station 24V + + whenever the sensor device is activated (Normally Closed contact from - - rd 3 party supplied device). RELAY Normally Open contact for remote device activation NO NO (i.e. video switcher, DVR, etc.)
Streszczenie treści zawartej na stronie nr. 4
AUDIO C.C. DATA CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-AiphoneAX1-XS), 2 of 2 Configuration Notes (2 of 2): 1. Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and ensure that the AX-CEU has been programmed to accept a video door station on that input (see Pg. 2). 2. Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the Meridian fiber receiver module (as detailed below, Fig. 2).
Streszczenie treści zawartej na stronie nr. 5
CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with Infinova Fiber (N3732TA-M/-R, N3732RA-M/-R), 1 of 2 Configuration Notes (1 of 2, continued): 4. When the SENSOR input is used, the door station will be turned on whenever AX-DM or IE/IF-Series AXW-AVT PS-2420UL the sensor device is activated (Normally Audio Door Station 24V rd + + Closed contact from 3 party supplied - - device). RELAY Normally Open contact for remote device activation NO NO (i.e. video switcher, DVR, etc.) 5. The RELAY outp
Streszczenie treści zawartej na stronie nr. 6
CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with Infinova Fiber (N3732TA-M/-R, N3732RA-M/-R), 2 of 2 Configuration Notes (2 of 2): 1. Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and ensure that the AX-CEU has been programmed to accept a video door station on that input (see Pg. 2). 2. Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the terminal block of the Infinova N3732RA-M, as shown. For detailed terminal defin
Streszczenie treści zawartej na stronie nr. 7
Configuration Notes (1 of 2, continued): CONFIGURATION DIAGRAM: 4. When the SENSOR input is used, the door AXW-AVT / AXW-AVR with AFI (American Fibertek) Fiber (MT/MR-89A-AX), 1 of 2 station will be turned on whenever the sensor device is activated (Normally Closed contact rd AX-DM or IE/IF-Series AXW-AVT from 3 party supplied device). PS-2420UL Audio Door Station 24V + + 5. The RELAY output provides an optional - - Normally Open dry contact output which is RELAY Normally Open contact f
Streszczenie treści zawartej na stronie nr. 8
CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with AFI (American Fibertek) Fiber (MT/MR-89A-AX), 2 of 2 Configuration Notes (2 of 2): 1. Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the terminal block of the AFI MR-89A-AX, as shown. For detailed terminal definitions, consult the AFI MR-89A-AX installation sheet. 2. Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and ensure that the AX-CEU has been programmed to accept a
Streszczenie treści zawartej na stronie nr. 9
CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with KBC Networks (FPVB1-AB1-IB2-ST, FPVB1-AB1-IB2-SR), 1 of 2 Configuration Notes (1 of 2): Configuration Notes (1 of 2, continued): 1. AX-series video door station connects to ‘DOOR’ input of AXW-AVT. 4. When the SENSOR input is used, the door station will be turned on Ensure that the “CCTV / DOOR’ switch on the AXW-AVT is in the ‘DOOR’ whenever the sensor device is activated (Normally Closed contact from rd position. 3 party supplied device). *2.
Streszczenie treści zawartej na stronie nr. 10
CONFIGURATION DIAGRAM: AXW-AVT / AXW-AVR with KBC Networks (FPVB1-AB1-IB2-ST, FPVB1-AB1-IB2-SR), 1 of 2 Configuration Notes (2 of 2): 1. Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the terminal block of the AFI MR-1890, as shown. For detailed terminal definitions, consult the AFI MR-1890 installation sheet. 2. Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and ensure that the AX-CEU has been programmed to accept
Streszczenie treści zawartej na stronie nr. 11
CONFIGURATION DIAGRAM: AXW-AVT with Axis 243SA Video Server (Standalone Only) Axis 243SA Application Considerations: The Axis 243SA can only be used in ‘Standalone’ configuration (i.e., AX-DM or IE/IF-Series utilizing a PC as a master station). AXW-AVT PS-2420UL Audio Door Station When used in standalone configuration, Aiphone recommends 24V + + Controlware’s VIPDoorControl software. For further details, see - - http://www.vipdoorcontrol.com. RELAY Normally Open contact for remote device
Streszczenie treści zawartej na stronie nr. 12
AXW-AVT Internal Jumper Settings: The AXW-AVT has three internal jumper settings to control the functionality and conditioning of the audio circuitry. These should be adjusted as necessary, based on the selection of fiber / Ethernet equipment used. To access these jumpers, the chassis of the AXW-AVT will need to be opened. Adjusting these jumper settings will NOT invalidate the AXW-AVT’s warranty. Transmitting Gain (CN3): Controls the amount of amplification applied to the outgoing audio (
Streszczenie treści zawartej na stronie nr. 13
SPECIFICATIONS: Power: AXW-AVT 24V DC, 500mA (use Aiphone PS-2420UL) AXW-AVR Supplied by AX CEU Video Input & Output: Composite 1V Peak-to-Peak, NTSC Video Connectors: BNC Door input: RJ-45 Relay: Normally Open contact output; 30V DC, 1A Sensor: Normally Closed contact input Wire: CAT-5e, 24AWG UTP-4 Wiring distance: AXW-AVT to Door, Max. 980' cumulative AXW-AVR to CEU AXW-AVT / -AVR to As close as possible; do not exceed 16' rd 3 party devices Dimensions: AXW-AVT + AXW-AVR 1-5/8"H x 7"W x 4"D
