Streszczenie treści zawartej na stronie nr. 1
INTEGRATED CIRCUITS
DATA SHEET
TDA6107JF
Triple video output amplifier
Product specification 2002 Oct 18
Streszczenie treści zawartej na stronie nr. 2
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF FEATURES GENERAL DESCRIPTION • Typical bandwidth of 5.5 MHz for an output signal of The TDA6107JF includes three video output amplifiers 60 V (p-p) and is intended to drive the three cathodes of a colour CRT directly. The device is contained in a plastic DIL-bent-SIL • High slew rate of 900 V/μs 9-pin medium power (DBS9MPF) package, and uses • No external components required high-voltage DMOS technology. • Very si
Streszczenie treści zawartej na stronie nr. 3
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF BLOCK DIAGRAM V handbook, full pagewidth DD 6 MIRROR 1 MIRROR 5 TDA6107JF CASCODE 1 3× MIRROR 4 V oc(3), 9, 8, 7 CURRENT 1× V oc(2), SOURCE V oc(1) 1× R f THERMAL VIP DIFFERENTIAL PROTECTION CIRCUIT REFERENCE STAGE V , i(1) 5 1, 2, 3 V , i(2) MIRROR 3 I o(m) V R i i(3) R a 3× CASCODE 2 MIRROR 2 4 MBL525 Fig.1 Block diagram (one amplifier shown). PINNING SYMBOL PIN DESCRIPTION handbook, halfpage V i(1) 1 V 1 inver
Streszczenie treści zawartej na stronie nr. 4
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages measured with respect to pin 4 (ground); currents as specified in Fig.1; unless otherwise specified. SYMBOL PARAMETER MIN. MAX. UNIT V supply voltage 0 250 V DD V input voltage at pins 1 to 3 0 12 V i V measurement output voltage 0 6 V o(m) V cathode output voltage 0 V V oc DD I LOW non-repetitive peak cathode output current
Streszczenie treści zawartej na stronie nr. 5
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT R thermal resistance from junction to ambient 56 K/W th(j-a) R thermal resistance from junction to fin note 1 11 K/W th(j-fin) R thermal resistance from heatsink to ambient 18 K/W th(h-a) Note 1. An external heatsink is necessary. Thermal protection The internal thermal protection circuit gives a decrease of MBH989 the slew rate at high temperatures: 10%
Streszczenie treści zawartej na stronie nr. 6
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF CHARACTERISTICS Operating range: T = - 20 to +150 °C; V = 180 to 210 V. Test conditions: T =25 °C; V = 200 V; j DD amb DD 1 V =V =V = ⁄ V ; C = 10 pF (C consists of parasitic and cathode capacitance); R = 18 K/W o(c1) o(c2) o(c3) 2 DD L L th(h-a) (measured in test circuit of Fig.8); unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT I quiescent supply current 5.6 6.6 7.6 mA q V internal ref
Streszczenie treści zawartej na stronie nr. 7
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Δt difference in cathode output V = 100 V (p-p) square - 10 0 +10 ns Pco o(c) propagation time 50% input to wave; f < 1 MHz; 50% output (pins 7 and 8, t =t =40ns r f 7 and 9 and 8 and 9) (pins 1, 2 and 3) t cathode output rise time V = 50 to 150 V square 67 91 113 ns o(r) o(c) 10% output to 90% output wave; f < 1 MHz; t =40ns f (pins 7, 8 and 9) (pins 1, 2 and 3); se
Streszczenie treści zawartej na stronie nr. 8
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF MBH988 200 handbook, halfpage V o(c) (V) 160 129 120 80 40 0 2.5 0 2 46 V (V) i Fig.5 Typical DC-to-DC transfer of V to V . I OC 2002 Oct 18 8
Streszczenie treści zawartej na stronie nr. 9
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF 4.04 V i (V) 3.08 t 2.12 t st O (in %) v 151 150 140 149 V o(c) (V) 100 60 50 t t o(r) MGK280 t Pco Fig.6 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal. 2002 Oct 18 9
Streszczenie treści zawartej na stronie nr. 10
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF 4.04 V i (V) 3.08 t 2.12 t st 150 140 V o(c) (V) 100 O (in %) v 51 60 50 49 t t o(f) MGK281 t Pco Fig.7 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal. 2002 Oct 18 10
Streszczenie treści zawartej na stronie nr. 11
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF Cathode output Dissipation The cathode output is protected against peak current Regarding dissipation, distinction must first be made (caused by positive voltage peaks during high-resistance between static dissipation (independent of frequency) and (1) flash) of 3 A maximum with a charge content of 100 μC . dynamic dissipation (proportional to frequency). The cathode is also protected against peak currents The sta
Streszczenie treści zawartej na stronie nr. 12
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF TEST AND APPLICATION INFORMATION V handbook, full pagewidth DD C7 C8 20 nF 10 μF J1 6 R C1 f R 22 μF i V 1 of V i(1) V oc(1) 9 C2 1 R a I C10 R1 om 22 nF 6.8 pF 2 MΩ C9 probe 1 3.2 pF C11 R2 136 pF 100 kΩ J2 R C3 f R 22 μF i V 2 of V i(2) V oc(2) 8 C4 2 R a C13 I R3 om 22 nF 6.8 pF 2 MΩ C12 3.2 pF probe 2 C14 R4 136 pF 100 kΩ J3 C5 R f R 22 μF i V 3 of V i(3) V oc(3) 7 C6 3 R a C16 I R5 om 22 nF 6.8 pF 2 MΩ C15 3.
Streszczenie treści zawartej na stronie nr. 13
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF INTERNAL CIRCUITRY handbook, full pagewidth V GND DD 46 to cascode stage to black current measurement circuit TDA6107JF 1, 2, 3 (1) esd from input flash circuit 7, 8, 9 esd esd to black current V bias from esd measurement circuit input from circuit control circuit 5 from black current esd measurement esd 6.8 V circuit from control to black current circuit measurement circuit to black current measurement circuit MB
Streszczenie treści zawartej na stronie nr. 14
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF PACKAGE OUTLINE DBS9MPF: plastic DIL-bent-SIL medium power package with fin; 9 leads SOT111-1 D D 1 q A 2 P P 1 Q A 3 q 2 q 1 A A 4 E pin 1 index c L 19 e b Z e 2 b w M 2 θ b 1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) A (1) 2 (1) (1) Z UNIT A A Abc bb D D E eL e PP Qqqq w θ 3 4 12 12 1 1 2 max. max. o 18.5 8.7 15.5 1.40 0.67 1.40 0.48 21.8 21.4 6.48 3.9 2.75 3.4 1.75 15.1 65 4.4 5.9 mm 3.7 2.54
Streszczenie treści zawartej na stronie nr. 15
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF SOLDERING The total contact time of successive solder waves must not exceed 5 seconds. Introduction to soldering through-hole mount packages The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the This text gives a brief insight to wave, dip and manual specified maximum storage temperature (T ). If the stg(max) soldering. A more in-depth account of soldering I
Streszczenie treści zawartej na stronie nr. 16
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF DATA SHEET STATUS DATA SHEET PRODUCT LEVEL DEFINITION (1) (2)(3) STATUS STATUS I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will b
Streszczenie treści zawartej na stronie nr. 17
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18 17
Streszczenie treści zawartej na stronie nr. 18
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18 18
Streszczenie treści zawartej na stronie nr. 19
Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18 19
Streszczenie treści zawartej na stronie nr. 20
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2002 SCA74 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of
