Instrukcja obsługi Phase Technology P-200

Streszczenie treści zawartej na stronie nr. 1

P-200
HIGH CURRENT
MULTI-APPLICATION
SUBWOOFER/MONO-BLOCK
POWER AMPLIFIER
USER’S GUIDE

Streszczenie treści zawartej na stronie nr. 2

SAFETY INSTRUCTIONS such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9. Heat - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. 10. Power Source - The appliance should be connected to a power supply only of the type described in the CAUTION: To reduce the risk of electric shock, do not operating instructions or as marked on the appliance. remove cover (or back). No user-service

Streszczenie treści zawartej na stronie nr. 3

• Rugged design that fits in a single rack space with thermostatically controlled cooling fan • Designed to operate efficiently into 4 ohm speaker loads OPERATING INSTRUCTIONS AND CONTROLS FRONT PANEL 1 2 3 4 5 6 1. Power on-off switch, master power control 2. Indicator LEDs: Power LED, red indicator light for main power on Dual color LED: Red Standby-mute, Green Auto-

Streszczenie treści zawartej na stronie nr. 4

• FULL RANGE: This switch position transforms the P200 amplifier in to a high performance 20Hz-20kHz, 200-watt mono-block power amplifier. With the switch in this position the front panel Crossover control and the rear panel Low Frequency Equalization control do not function. 4. LINE IN connectors are a set of dual RCA type plugs that accept an input signal from the subwoofer or main signal outputs from your home theater receiver or control center. Either one or both of the inputs can be used as