Instrukcja obsługi Yamaha S12Me

Streszczenie treści zawartej na stronie nr. 1

SPEAKER SYSTEMS
S10e/S12e/S15e
S12Me
Owner’s Manual
Mode d’emploi
Bedienungsanleitung
Manual de instrucciónes
Thank you for purchasing a YAMAHA product. To obtain
maximum performance from your YAMAHA speaker system
and ensure many years of trouble-free operation, we recommend
that you read this Owner’s Manual thoroughly before use.
Contents
Precautions ......................................................................2
Connecting the Speakers ................................................3

Streszczenie treści zawartej na stronie nr. 2

Precautions AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND VI- To protect your speakers BRATION When choosing a location for your speakers, avoid the fol- When choosing a power amplifier to use with your lowing: speakers, make sure that its power output matches the speakers’ power capacity (refer to the Specifications on • Direct sunlight, high temperatures (such as near heat- page 4). Even if the amplifier’s power output is lower ers), or excessively low temperatures. than the speakers’ PGM (program)

Streszczenie treści zawartej na stronie nr. 3

• Remove the speakers from the stands before moving the CAUTION! stands or adjusting their height. For the four models, S10e, S12e, S15e and S12Me, use the • Implement measures to prevent the speaker stands from TS-30, TS-40, TS-80, or TS-90 speaker stand by Ultimate falling over. Support System, Inc. sold separately. • Use the stand at no higher than 150 cm for all speaker When using speaker stands, observe the following precau- models. tions to prevent the speaker stands from falling over or t

Streszczenie treści zawartej na stronie nr. 4

PHONE PLUG WIRING The standard input terminals for this unit are 1/4" phone jacks. Connect the speaker leads as shown in this diagram. Caution: Use only unshielded speaker cable with stranded conductors to connect speakers to the speaker terminals on a power amplifier. The use of audio cable not rated as sufficient for the amplifier’s maximum output level can create a potential fire hazard. Specifications Model S10e S12e/S12Me S15e Enclosure Bass reflex type Speaker Unit LF 10" cone 12" cone 15"